Everbilt THD1090 Operating instructions

Everbilt
Brand
Everbilt
Model
THD1090
Type
Operating instructions

Everbilt THD1090 Sump Pump Discharge Kit is a plumbing solution designed to enhance the functionality of residential sump pumps. It includes four distinct parts: a discharge pipe with a weep hole, a coupling pipe, a pipe with a check valve, and an additional discharge pipe. The weep hole in the discharge pipe prevents airlock in the pump, ensuring efficient operation. The check valve in the pipe with check valve allows water to flow out of the sump pump but prevents backflow, protecting the pump from damage.

Everbilt THD1090 Sump Pump Discharge Kit is a plumbing solution designed to enhance the functionality of residential sump pumps. It includes four distinct parts: a discharge pipe with a weep hole, a coupling pipe, a pipe with a check valve, and an additional discharge pipe. The weep hole in the discharge pipe prevents airlock in the pump, ensuring efficient operation. The check valve in the pipe with check valve allows water to flow out of the sump pump but prevents backflow, protecting the pump from damage.

THANK YOU
We appreciate the trust and condence you have placed in Everbilt through the purchase of this Sump Pump Discharge Kit. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Everbilt!
USE AND CARE GUIDE
SUMP PUMP DISCHARGE KIT
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-297-6069
HOMEDEPOT.COM
Item # 1002711124
Model # THD1090
2
Table of Contents
Safety Information ..................................2
Warranty ..........................................3
Pre-Installation .....................................3
Installation ........................................5
Safety Information
PRECAUTIONS
1. This document serves only as an installation guide. Refer to
your state and/or local plumbing or onsite wastewater treatment
and disposal regulations for details pertaining to your system’s
design, installation and maintenance requirements.
2. Keep this instruction manual in a safe place for future reference.
3. This product is for use with residential sump pumps only with a
maximum 12 psi.
4. A factory-drilled weep hole at the discharge connection prevents
pump air lock.
DANGER: ALWAYS disconnect the power to the pump
before servicing.
DANGER: Do not touch the motor housing during
operation. The motor is designed to operate at high
temperatures. Do not disassemble the motor housing.
DANGER: Do not handle a pump or pump motor with wet
hands or when standing on a wet or damp surface, or in
water. lf the basement oor is wet, do not walk on the wet
area until all power is turned off. If the shut-off box is in the
basement, call the electric company to shut off service to
the house, or call your local re department for instructions.
Remove the pump and repair or replace. Failure to follow
this warning can result in fatal electrical shock.
WARNING: Release all pressure and drain all water from
the system before servicing any component.
WARNING: Wear safety goggles at all times when
working with pumps.
WARNING: Do not install the Sump Pump Discharge Kit
threaded tting above a basin cover because it has a weep
hole that is designed to leak.
CAUTION: Know the pump and its applications,
limitations, and potential hazards.
CAUTION: Periodically inspect the pump and system
components to ensure the pump intake is free of mud, sand,
and debris. Disconnect the pump from the power supply
before inspecting.
CAUTION: Follow all safety standards and all local
electrical codes.
3 HOMEDEPOT.COM
Please contact 1-877-297-6069 for further assistance.
Warranty
The manufacturer warrants to the original consumer purchaser of the Sump Pump Discharge Kit that it will be free from defects in material
and workmanship for the Warranty Period of 12 months from date of purchase. The date of purchase shall be determined by the original
dated sales receipt.
The manufacturer shall not be liable under this Warranty for any product that, in our sole judgment, has been subject to negligence,
misapplication, improper installation, or improper maintenance. Also, the manufacturer shall not be liable under this Warranty if the product
has been disassembled, modied, abused, or tampered with.
Your sole remedy, and the manufacturer’s only duty, is that the manufacturer repair or replace defective systems (at the manufacturer’s
choice). You must pay all labor and shipping charges associated with this warranty. No request for service will be accepted if received after
the Warranty Period has expired. This warranty is non-transferable.
The manufacturer shall not be liable for any consequential, incidental, or contingent damages whatsoever. The manufacturer makes no
warranty regarding the suitability of a product for a particular installation.
This warranty excludes all industrial, agricultural, commercial, and business usage of this system.
The foregoing warranties are exclusive and in lieu of all other express and implied warranties, including but not limited to the implied
warranties of merchantability and tness for a particular purpose. The forgoing warranties shall not extend beyond the duration expressly
provided herein.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of the implied
warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specic legal rights and you may also have
other rights which may vary from state to state. This warranty applies to only products installed in the United States of America and Canada.
This warranty supersedes and replaces all previous warranty publications.
Contact the Customer Service Team at 1-877-297-6069 or visit www.HomeDepot.com.
Pre-Installation
PLANNING INSTALLATION
Make sure all of the items shown in the Package Contents section are included. There are four distinct parts making up the completed
assembly. If any part appears missing or damaged, do not install this product.
TOOLS REQUIRED
Flathead
screwdriver
Hand hacksaw
or PVC cutter
Wrench Threaded tape
Tape
measure
5-Gallon
bucket
Safety goggles
4
Pre-Installation (continued)
PRODUCT DESCRIPTION
A
B
C
D
Part Description
A Discharge pipe with weep hole
B Coupling pipe
C Pipe with check valve
D Additional discharge pipe
FOR EXISTING INSTALLATIONS – BEFORE YOU BEGIN INSTALLATION
If you are installing this Sump Pump Discharge Kit into an existing installation, complete these steps before you install the Sump Pump
Discharge Kit.
1. Unplug your pump.
2. If your system is sealed, disconnect the vent from your cover.
3. Disconnect the existing discharge pipe at the inlet to your old check valve.
4. Remove the cover from your basin.
5. Remove the pump and the attached discharge pipe from your basin.
6. Drain the discharge pipe above the check valve into the basin or a bucket by pushing the apper in the check valve up with your nger
or a blunt object. Be careful. It may get messy.
7. Remove your old check valve from the existing discharge pipe.
5 HOMEDEPOT.COM
Please contact 1-877-297-6069 for further assistance.
Installation
1
Attaching the discharge pipe with
weep hole to your pump
□ Place the pump (not included) to be installed on the oor.
□ Apply threaded tape to the discharge pipe with weep hole
(A) and hand-tighten it into the pump’s discharge opening.
□ Place the pump in the basin (not included) and align the
discharge pipe with weep hole (A) under your existing
discharge pipe (1). Replace the basin cover so that the
discharge pipe with weep hole (A) passes through the
discharge opening. Do not secure it yet.
□ Measure the distance between the end of the discharge
pipe with weep hole (A) and your existing discharge pipe
(1) to ensure it is greater than 31 inches. If it is not, cut
your existing discharge pipe to ensure the minimum
31 in. distance.
A
Minimum 31 in.
1
2
Preparing the installation location
□ Slide the coupling pipe (B) onto the discharge pipe with
weep hole (A). Then slide the pipe with check valve (C) into
the coupling pipe (B).
□ Slide the pipe with check valve (C) up and over your
existing discharge pipe (1). Add the additional discharge
pipe (D) to your existing discharge pipe (1) if you need
more length.
□ Tighten all the hose clamps on the pipe with check valve
(C) and the additional discharge pipe (D) (if necessary) with
a athead screwdriver. Do not exceed 15 in-lbs.
□ Slide the coupling pipe (B) into a position so that it covers
at least 1 in. of the discharge pipe with weep hole (A) and
pipe with check valve (C).
□ Tighten all the hose clamps on the coupling pipe (B) with a
athead screwdriver. Do not exceed 15 in-lbs.
□ Reattach your existing discharge ange and vent to the
cover as necessary and secure the cover to the basin.
□ Plug in your pump. Cycle your system a few times and
check for leaks. Tighten any clamps if necessary with a
athead screwdriver. Do not exceed 15 in-lbs.
A
B
C
1
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-297-6069
HOMEDEPOT.COM
Retain this manual for future use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Everbilt THD1090 Operating instructions

Everbilt
Brand
Everbilt
Model
THD1090
Type
Operating instructions

Everbilt THD1090 Sump Pump Discharge Kit is a plumbing solution designed to enhance the functionality of residential sump pumps. It includes four distinct parts: a discharge pipe with a weep hole, a coupling pipe, a pipe with a check valve, and an additional discharge pipe. The weep hole in the discharge pipe prevents airlock in the pump, ensuring efficient operation. The check valve in the pipe with check valve allows water to flow out of the sump pump but prevents backflow, protecting the pump from damage.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents