Basic Installation:
If all you require is to cover up an existing sump basin; simply place the
cover on top of the sump basin, align the bolt holes in the cover with the bolt
holes in the basin and secure the cover to the basin with the provided bolts
and washers. Do not overtighten.
Safety Information:
Warranty:
www.jackelinc.com
574-256-5635
!
WARNING: Failure to install basin cover as shown will create a safety
risk. Install cover as shown.
Package Contents Tools Required
Safety Goggles
7/16” Wrench
For more information please visit our website: www.jackelinc.com/warranty
Installation Guide
Sump Basin Cover
Model: SF22B-DR
Cover
4 x Bolts &
Washers
Custom Installation:
1. If your application requires discharge and / or vent openings use a hole
saw to perform the necessary cuts. On the bottom of the cover, you will
find circular molded inserts that can be used as a template when making
your cuts. You can also use your existing cover as a template.
2. Unplug your pump and remove / detach existing pipe(s) and the pump
cord from your existing cover.
3. Attach the new cover to the sump basin using the basic installation in-
structions (above) and make sure that your discharge and / or vent pipe
(s) are properly aligned with the hole(s) that have been cut into the cover.
4. Install your check valve and the rest of your discharge and / or vent
pipes.
5. To complete the installation, the pump cord can be run through a sepa-
rately cut hole in the cover or through a discharge or vent hole if neces-
sary. Plug your pump back in.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Jung-pumpen Jung Pumpen Basin and Lift Systems Owner's manual
-
MYERS WG20 Duplex Grinder Pumps Owner's manual
-
Flotec FP400C Owner's manual
-
Hydromatic Hydr-O-Rail System Owner's manual
-
-
-
Little GIANT 509635 User guide
-
Pentair CSS-3D, CSS-3V Preplumbed Sump Pump System Owner's manual
-
-
