Posiflex SK-400 / SK-410 User manual

Brand: Posiflex

Model: SK-400 / SK-410

Type: User manual

Package Contents

 2D barcode scanner with mounting bracket kits for

HS series (x 1)

 USB cable (x 1)

 #6/32-8L screws (x4)

 SK-400/410 barcode scanner user manual (x 1)

SK-400/410

Barcode Scanner with Mounting

Brackets for HS Series

User Manual

18050905010 Ver. A0

http://www.posiflex.com

SOME IMPORTANT NOTES

FCC NOTES

This system meets industry & government requirements and applicable

standards. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions

manual, may cause interference to radio communications. It has been tested

and found to comply with limits for a Class A digital device pursuant to

subpart B of Part 15 of FCC Rules, which are designed to provide reasonable

protection against interference when operated in a commercial environment.

Operation of this equipment in a residential area is likely to cause interference

in which case the user at his own expense will be required to take whatever

measures to correct the interference.

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

CE CLASS A WARNING

This equipment is compliant with Class A of CISPR 32. In a residential

environment this equipment may cause radio interference.

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any

person other than the authorized technicians. The user should consult his/her

dealer for the problem happening. Warranty voids if the user does not follow

the instructions in application of this merchandise. The manufacturer is by no

means responsible for any damage or hazard caused by improper application.

警告使用者

這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

Views of SK-400/410

SK-400 Bracket SK-410 Bracket

Cover Button

Scan Window

Screw Holes

Mounting Holes

USB Type A

Cable

Screw Holes

Screw Holes for Second Display

Mounting SK-400/410 to your Terminal

Please follow the below steps to complete the installation of SK-400/410.

During Installation, please make sure the terminal is completely shut down.

1. If you are installing SK-400 instead of SK-410, please skip this

step. For SK-410, you have to install your second display first.

Please fix the SK-410 bracket to the second display with three #6/32-

8L screws (which are provided in the packing list of your second

display).

2. Remove the top I/O cover of your HS terminal.

3. Place the SK-400/410 bracket onto the HS terminal and then fix it

with 4 #6/32-8L screws.

Top I/O Cover

SK-400 Bracket

SK-410 Bracket

4. For SK-400, connect the USB type A cable with the terminal.

For SK-410, connect the USB type A cable and the display cable

with the terminal. In the below picture, it takes the VGA cable for

the example.

5. For SK-400, arrange the USB cable into the top I/O cover and make

the USB cable on the left side of the I/O cover. Put the I/O cover

back to the terminal. Please refer to the below picture.

For SK-410, arrange the USB cable and the VGA cable into the top

I/O cover. Make the USB cable on the left side of the I/O cover, and

make the VGA cable on the right side of the I/O cover. Put the I/O

cover back to the terminal. Please refer to the below picture.

USB Cable

VGA Cable

USB Cable

6. Hook the SK-400/410 to the two mounting holes on the bracket.

SK-400

USB Cable

SK-410

7. Gently push the cover button to put the two bracket covers onto the

SK-400/410.

VGA Cable

USB Cable

For SK-410, there is a cable exit for the display cable.

Cable Exit

VGA Cable

8. Installation complete.

SK-400 SK-410

Setting up SK-400/410

To enable you to configure SK-400/410 based on personal preferences, two

options are offered to achieve the purpose: the advanced user manual, which

contains a complete set of barcode labels, and the quick setup guide with most

frequently used barcode labels. Please visit Posiflex Global Website

(http://www.posiflex.com/en-global/Download/download) to download the

related documents.

Manual Trigger Button

To push the manual trigger button of the 2D barcode scanner, please follow the

below steps.

1. Gently push the cover button to remove the bracket cover.

2. Find the manual trigger button. Please refer to the below picture.

3. Use a needle to press the button.

2D Barcode Scanner Specifications

Scan method

CMOS area sensor (black and white)

Number of effective pixel

640 (H) × 480 (V) dot

Image capture speed

100 fps (frame rate)

(The fastest speed of image capture)

Adjusting angle

Horizontal：Approx.180°

Horizontal：Approx.110°

View angle

Diagonal： Approx. 46.4˚

Horizontal： Approx. 38.0˚

Vertical： Approx. 26.4˚

Auxiliary light source

(LED × 1)

Color：Warm White LED

Color Temperature：2600 ~ 3700K

Light source for aiming

(LED × 1)

Color：Green LED

Peak Wave Length：525 nm

Depth of field (mm)

 Code 39

45~120mm (Resolution(0.127))

60~240mm (Resolution(0.25))

80~260mm (Resolution(0.33))

 Code 128

65~210mm (Resolution(0.25))

 UPC

45~300mm (Resolution(0.33))

 PDF417

30~210mm (Resolution(0.25))

 QR Code

30~240mm (Resolution(0.381))

 DataMatrix

35~160mm (Resolution(0.31))

(Measured from the front end of the scanner)

※ The product information and specifications are subject to change without

prior notice. To get the detailed information on SK-400/410, please check

this model from Posiflex Global Website:

(http://www.posiflex.com/en-global/Download/download).

<MEMO>

Posiflex SK-400 / SK-410 User manual

Posiflex SK-400 / SK-410 User manual

Posiflex SK-400 / SK-410 User manual

Related papers

Other documents