Lisheng DVB600 User manual

DIGITAL TV RECEIVER

User's manual

•

for your future reference.

Please read the manual carefully before use and keep it Safe

11

Important safety instructions:

• Thank you for purchasing this product.

DVB-T RECEIVER

•

• Design and specifications are subject to change without

notice.

• The illustrations in this manual may appear different from

the actual product due to printing conditions.

The power input is DC+10V~14V.

Do not place it near a heater.

Do not use liquid or aerosol cleaners.

Use a light damp cloth for cleaning.

Do not open or remove cover. Refer all servicing to qualified

service personnel.

11

Table of Content:

Main Features:

Front and Rear Panel: . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Remote Control Unit (RCU): . . . . . . . . . . . . . . . . . . . . .3

Basic Functions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

DIGITAL TV: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

USB MEDIA PLAY: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Games: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Trouble Shooting: . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

SPECIFICATIONS: . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

DVB-T RECEIVER

11

Main Features:

1

DVB-T RECEIVER

•

Fully compliant with MPEG-2 and DVB-T standards.

PIG(Picture in Graphic) support.

Channel editing function (Favorite, Moving. Locking. Delete).

Automatic and manual search.

Stores over 1000 channels.

Provide electronic program guide (EPG) (option)

Easy software upgrade.

Timer function automatically turns on/off by setting function.

OSD Teletext and VBI Teletext support.

Support language options (English, Deutsche, French,

Swedish, Portuguese, Finland, Netherlandish, Czech, Greece,

Danish, Turkish, Italian and Spanish total 13 Languages).

USB Supports the play of JPGE/MP3/MP4 play (AVI/MPG/

DAT/VOB) and software upgrade.

Remark some special USB and MP4 format can not fully

support.

The following have been packed in your receiver box:

• User's manual x 1

• Remote control unit x 1 (RCU)

• Extended R/C box x 1

• A/V wire x 1

• Power supply wire x 1

Features

Accessories

11

2

DVB-T RECEIVER

Front and Rear Panel:

EXTENDED

R/C BOX

USB AUDIO L/R

INPUT

VIDEO

INPUT

IR

RECEIVER

POWER

LED

ACC: Car Engine Key (Red)

BATT: +10~14V DC Power supply input (Yellow)

STANDBY: +10~14V DC, 2.5Amp output (Blue)

GND: Power supply ground (Black)

•

connect ACC wire to car ACC switch.

• For home use: Put BATT and ACC wire together and

connect to +10~14V DC.

• DC output ground, connect to the device GND with which use

the DC +10v~14V output.

For car use: Connect the BATT wire to car battery and

11

3

Remote Control Unit (RCU):

- POWER :

Switch the receiver between stand-by

& on modes

- MUTE :

Mute the audio output

- NUMERIC KEYS(0~9):

For direct entry of channel number or

input of alphanumeric characters

- TXT:

Display on the teletext contents of the

viewed channel, if teletext is transmitted

- TV/RADIO(GREEN):

Switch between TV and radio mode

- FAV (RED):

Select the favorite or all channels

- TV/AV:

No function

- MENU:

Access the main menu

- AUDIO:

Switch the audio language if

transmitting more then one language

and Select the different audio modes

- EXIT:

To return to previous status or exit

- CH( / ):

Change channels sequentially up or

down in viewing mode and move to the

next higher or lower item in the menu

SU B.

EP G TX T

AU DIO SCAN

FAV

PG DN

PG UP

TV-RADIO

TV-AV

INFO

BACK

MENU

CH+

VOL +VOL -

CH -

PAUSE

EXIT

OK

DVB-T RECEIVER

11

4

Remote Control Unit (RCU):

SU B.

EP G TX T

AU DIO SCAN

FAV

PG DN

PG UP

TV-RADIO

TV-AV

INFO

BACK

MENU

CH+

VOL +VOL -

CH -

PAUSE

EXIT

OK

- VOL( / ):

Alter the Audio output level up or down

in viewing mode or move to the left or

right item in the menu

- OK/LIST:

Select an item or confirm a choice.

A list will enter the channel in viewing

mode

- EPG (Electronic Program Guide):

Call up the EPG function

- INFO:

Display information on viewed channel

- PgUP/ PgDN:

Move up/down a page in the channel

list. Shower movie playing speed while

playing .

- BACK(YELLOW):

Go back to the previously viewed

channel

- PAUSE(BLUE):

Press once to pause the screen

picture, press once again to go to

the normal mode

-SUB. :

Switch the subtitle on if the subtitle is

transmitted on this channel

-SCAN:

Searching all channel quickly

DVB-T RECEIVER

11

Basic Functions:

5

1. Enter into DVB system

It will enter DVB mode as soon as system power on, shows the

system interface while none TV/RADIO programs in the database.

Enter into system and power on-off

It will continue to play the last est program before previous

power off if the database having and TV. or RADIO program.

2. Power on

When it is “STANDBY” mode, press “POWER” to power on.

3. Power off

When it is running, press “POWER” will enter into “STANDBY”

mode.

Volume adjustment and Mute

1.Press “VOL+/-”to adjust volume when system is in normal playing

mode: and it will show volume bar on the image.

2.Press“MUTE”to enter into the mode when normally playing and

repress“MUTE”to back the normal state.

DVB-T RECEIVER

TV/RADIO Programs switch

Press “TV/RADIO” to switch the programs when it is in full screen.

press key “INFO” to show the information of current programs

when it is in normal playing state. Press again to show more

detail information.

Display information of programs

11

6

1. Press number keys to input program number.

2. If there are some favorite programs that been set up, just press

“FAV” to enter into the favorite program list:

Press “CH+/-” to select favorite program, Press “OK” affirm the

selection, press “EXIT” to hide menu.

1. Press “CH+/-” to switch to the previous or next program.

2. Press “OK” to switch to the speediness program list, press

“VOL+/-” to select different program class; press “ CH+/-” to

select program.

Press “OK” to affirm program Selection, press “EXIT” to hide

menu.

Station switch

Press key “RECALL” under state of full-screen to return to the

previous program played.

Program return

Basic Functions:

DVB-T RECEIVER

Subtitle

1. Subtitle is defaulted to be off; to see the capitation information,

press the “SUB-TITLE” key on the remote controller to enter the

subtitle menu of the current programs.

2. Press “VOL+/-” key to choose whether to open Subtitle, press

“CH+/-” key move upward and downward to choose language.

11

7

1. You can press key “EPG” on the remote controller to enter into the

EPG page the bottom Line shows hint information for keys,

corresponding to the colors on the remote controller:

RED, GREEN, YELLOW, BLUE;

Press “VOL+/-” to switch between Tab 4 and Tab 5 .

2. Press “GREEN” key to enter into Weekly Mode to display the

programs and program information in different time ranges of the

currently program list within one week.

Electronic programs guide(EPG)

Basic Functions:

DVB-T RECEIVER

(1). Press “PGUP” & “PGDW” key to switch between Sunday—Saturday

in Tab 3;

(2). Press “CH+/-” key to move upward and downward to switch

between the different programs in Tab 5;

(3). Press “VOL+/-” key to choose to view the program information in

different time ranges in Tab 6.

(4). When the cursor stop in Tab 5. press the yellow key to choose the

detailed information corresponding to the current program.

(5). When the cursor stop on Tab 5 of Figure 3.6 and Tab 3.7 , press

the blue key to enter Wake up Timer menu to book programs.

(6). Press “EXIT” to exit from EPG.

11

8

Basic Functions:

DVB-T RECEIVER

Teletext

1. If you want to teletext, please press “TXT” on the remote controller

to enter into the teletext page.

2. Input three digits to go to corresponding page you want;

3. Press “CH+” to go to the previous page, while press “CH-” to go to

the next page;

4. Press “VOL-” to back for 100 pages, while press “VOL+” to advance

for 100 pages.

5. Press “TXT” or “EXIT” to exit from teletext.

Audio language switch and L/R

channel switch

1. Press “AUDIO” key to switch the language of current programs and

switch among “Stereo” - “Left” - “Right” (stereo- left channel- right

channel)

2. Press “VOL+/-” to switch among “Stereo” - “Left” - “Right”

(stereo- left channel- right channel), press “CH+/-” to switch the

language of sound.

3. Press “OK” key confirm the selection and return to full-screen play

mode, press “EXIT” to return to full -screen play mode but not

save the setting.

11

9

DIGITAL TV:

DVB-T RECEIVER

• In the main menu of the system, under Digital TV, there are

such as options as auto TV search or broad cast programs,

program management, system set up, software update and

software version information view etc.

• In Main Menu, press “CH+/-” key to choose Digital TV option

and then Press “OK” key once to enter Digital TV menu

INSTALLATION

There are three kinds of Installation mode as follow:

1. Area Search:

Searching programs by scan area;

2. Manual Search;

3. Auto Search:

You can enter into parameter “installation page” via input

password digital (default password is “0000” ).

ACTIVE ANTENNA ACTIVE ANTENNA

RIGHT WRONG

ANT INSTALLATION

11

10

DVB-T RECEIVER

Area Search

Area search is a kind of intelligent and convenient mode of

programs searching, which covers programs of all frequency

points of target countries and regions.

At present, this system covers many targets countries and regions

including: Germany/ England/ Italy/ France/ Spain/ Holland/ Taiwan

/China/ Norway/ / Finland;

The default country (region) of system is Germany (you can select

target countries you want under system setting scan Area).

1. You can move the cursor to “area search” via press “CH+/-” key

under “installation menu” , then press “ENTER” to enter into area

searching page.

2. After entering into area search page, system will scan all programs

one under frequency points of current countries or regions selected

automatical ly.

3. During scanning, press “EXIT” key to stop and exit scanning.

4. If any program is detected and scanning process is finished, system

will exit the scanning page and to play them in window automatical ly.

Swedish

DIGITAL TV:

11

DIGITAL TV:

DVB-T RECEIVER

Manual Search

If you understan d much about digital TV and know the frequency

of the program or if you want to scan the program at any frequency

required, you can select manual scanning, which can save your

much time.

1. You can move the cursor to “area search” via press “CH+/-” key

under “installation menu”, then press “enter” to enter into area

searching page.

2. Prior manual scanning, you need to configure relevant parameters

including:

(1). Freq(KHz): the default frequency is 474000KHz, you can input

relevant digital to modify it.;

(2). Band Width: the default value of bandwidth is 8 MHz. while you

can set it to 6 MHz, 7 MHz, 8 Mhz. ;

3. Press “OK” key after configuration of start manual scan.

4. If any program is detected and the scanning process is finished,

system will exit the scanning page and save the program, at the

same time return to the “installation menu” and to play them

automatically. As shown in the figure below:

11

12

DVB-T RECEIVER

DIGITAL TV:

Auto Search

You can search the programs of any channel.

1. You can move the cursor to “area search” to enter into area

searching page, As shown in figure below:

2. Prior to auto scanning, you need to configure relevant parameters

including:

(1). Start Freq(KHz):the default frequency is 474000KHz, you can

input relevant digital to modify it.;

(2). End Freq(KHz):the default frequency is 474000KHz. While you can

input relevant digital to modify it;

(3). Band Width: the default value of bandwidth is 8 MHz. while you can

set it to 6 MHz, 7 MHZ, 8 MHZ .;

3. Press “OK” key after configuration of parameters to start manual

scan.

4. If any program is detected and the scanning process is finished,

system will exit the scanning page and save the program, at the

same time return to the “installation menu” and to play them

automatically. As shown in the figure below.

CHANNEL MANAGER

System offer an efficient function of channel management such as

channel deleting, marking, moving, locking, sorting and grouping.

There are two independent pages for channel management, TV

and RADIO. You can enter the page via “digital TV channel

manager” as shown in the figure below:

11

13

DIGITAL TV:

DVB-T RECEIVER

2. Channel organizer menu includes: Favorite Channel, Delete Channel,

Move Channel ,Lock Channel. Press “CH+/-” key to choose the line

where Favorite Channel is, then press the 4-color key on the remote

controll er: press the red key to set and cancel Favorite Channel, the

green key to set or cancel Delete Channel, the yellow key to set or

cancel Move Channel, the blue key to set or cancel lock Channel;

After setting, corresponding figure will appear;

3. To rename channel, press “CH+/-” key to choose the line where the

channel to be renamed is, press “VOL+/-” key to enter the page to

renamed is, press “VOL+/-” key to enter the page to rename the

channel, as shown in Figure 4.10:

4. After program editing, to edit the program, press “OK” key; to set or

cancel Lock Program, the system will hint to input “0000”; to set

Delete program, the system will hint to choose dialogue box “Do you

want to delete the selected items?”, Press “VOL+/-” key to choose,

choose “YES” to delete the program chosen, “No” to cancel;

5. Press “EXIT” key to exit Channel organizer page.

Channel Organizer

Channel organizer page includes favorite channel deleting,

moving, locking and rename.

1. It will pop up and dialogue box prompting that “Channel not

available” when there are no channels in database to enter into,

and it will not enter into channel organizer page.

11

14

DVB-T RECEIVER

DIGITAL TV:

The channel is shall be listed according to certain sequence so

that the user can easily find them .

Channel Sorting

1. It will pop up and dialogue box prompting that “Channel not

available” when there are no programs in database to enter into,

and it will not enter into channel sorting page.

2. Before sorting, the type of sorting shall be set, including the

following items:

(1). First Option: choose the programs to be sorted via the selection

area;

(2). Second Option: Press FTA(free to air),Scramble(encrypted), ALL

Free and Encrypted Channels;

(3). Third Option: According to alphabetic order A-Z, or Z-A;

3. Press “CH+/-” key choose type , Press “VOL+/-” key to set Sorting

Parameters;

4. After sorting is set, to realize channel sorting, press “OK” key, then

the system will hint with dialogue box “Are you sure?”.

5. To choose “YES” to confirm, you can see the programs in the

program list; to choose “No” to cancel, you can return to Channel

Sorting page;

6. Press “EXIT” key to exit Channel Sorting page.

11

15

DIGITAL TV:

DVB-T RECEIVER

Edit Channel

Have such operation as add, Delete and Rename to channels.

1. It will pop up and dialogue box prompting that:“No Carrier” when

there are no programs in database to enter into, and it will not enter

into ADD-Edit Channel page.

2.Press the red key of the remote controller to enter Add Channel

menu.

Under Add Channel menu, there are 6 parameters for adding one

channel as follows:

(1). Area Name: For Area Name, press the “VOL+” key of the remote

controller to enter the Area Name list on the right, then press

“CH+/-” key to choose area name, press “OK” key to confirm;

(2). Carrier: Press “VOL+/-” key to choose;

(3). Channel Name: Press “VOL+/-” key to enter Rename Channel

page as shown in Figure 4.10;

(4). Audio PID, Video PID, PCR PID, Press “0-9” number key to reviser

values;

(5). Press “OK” key to confirm the adding, the system will hint with

“Update succeed” and return to Edit Channel menu;

(6). Press “EXIT” key to return to Edit Channel page.

3. Press the yellow key to remote controller to enter Rename

Channel menu.

DVB-T RECEIVER

DIGITAL TV:

11

16

If you do not like one or some channel, you can delete it/them in

Channel Organizer menu, if you do not like all TV or Radio, you can

enter Delete All menu to choose to delete all TV, RADIO.

1. Under Channel Manager menu, press “CH+/-” key to choose Delete

All option, press “OK” key again, then the system will hint the

dialogue box of in putting password which is defaulted as “0000”,

input the proper password via the 0-9 number key of the remote

controller, then enter Delete All menu .

Press “VOL+/-” key to choose “Yes” or “No”, press “OK” key to

confirm.

3. All set up and operation are the same as in TV channel.

2. To delete all TV channels, press “CH+/-” key to move the cursor

to ALL TV Channels option, press “OK” key, then the system will hint

with “Delete All TV Channels?”

Delete

Group channels according to Movies, Sport, Music, Kids, Fashion etc.

Channel Grouping

1. It will pop up and dialogue box prompting that “Channel not

available” when there are no programs in database to enter into,

and it will not enter into channel grouping page.

2. Press “CH+/-” key to choose the line where the channel to be

grouped is in, then press the number keys 1-8 on the remote

controller to set different channel grouping.

3. After channel is edited, when “EXIT” key is pressed to exit the

menu, if actual channel editing action exists, the system will carry

out channel grouping renewal, with the hint of “Update succeeds”.

11

17

DIGITAL TV:

DVB-T RECEIVER

CONFIGURATION

Configuration provides individualized system setup function, you

can configure the system according to your own hobby and demand.

You can enter Configuration menu via the menu

(MENU-Digital TV-Configuration) .

TV set up provides convenient TV input mode, you can via menu

(MENU/ Digital TV/ Configuration/ TV), enter TV set .

All options are listed on the left of the menu, when the cursor moves to

the option on the left of the TV menu, the values corresponding to this

option can be display on the right of the menu.

TV

TV mode can change the mode of the on put video, you can adjust

TV mode according to the actual situation of you receiving equipment.

(1). Move the cursor to Display Mode option, press “VOL+/-” key to choose

circularly among the options, and the TV mode set can be effective

immediately;

(2). TV Mode can be set as Auto, PAL, NTSC;

(3). Default TV Mode: AUTO;

(4). Press “OK” key to save the setting, the system will hint with

“Update succeeds”.

Display Mode

Page is loading ...

Lisheng DVB600 User manual

Lisheng DVB600 User manual

Other documents