Xerox 230 LP Installation guide

Brand: Xerox

Model: 230 LP

Type: Installation guide

Xerox 230 LP is a powerful and versatile printer designed to meet the needs of demanding office environments. With AppleTalk connectivity, it seamlessly integrates into Mac networks, allowing for easy printing and sharing. The printer features a user-friendly control panel with a clear LCD display, making it simple to navigate through menus and configure various settings. Additionally, the 230 LP boasts fast print speeds, ensuring efficient document production. Its compact size and sleek design make it a suitable fit for any office space.

7+('2&80(17&203$1<

DC230LP AppleTalk

Quick Install

Page 1 of 2



Press []. displays.

Use the [] and [] keys to enter

[2222].

Note: 2222 is the factory default password and

may be changed to suit your needs. Refer to the

DC230LP System Administration Guide,

Network Installation and Troubleshooting

Press [Enter].

displays.

3. Access the AppleTalk menus:

Press []. displays.

Press [] until

displays.

Press []. displays.

Press [ ] until

displays.

Enter Password

System Admin

Port Setup

Network Setup

TCP/IP

AppleTalk

4. Enable AppleTalk

Press []. displays.

Press [Enter]. **SAVED** is

displayed momentarily, followed by

5. Enter the Printer Name:

Press [] until

displays.

Press []. displays.

Press [] repeatedly until the cursor

reaches the end of the entry. A tone

sounds indicating when the last

character has been reached.

Enablement

Disabled

Enablement =

Disabled *

Enablement =

Enabled

Enablement

Enabled

Printer Name

(current entry)

Printer Name =

(current entry) *

Over

Before Installation:

Record the following information for use during

setup at the DC230LP:

AppleTalk Printer Name:___________________

Note: The DC230LP will attach itself to the

default zone of the local segment where it is

connected.

This installation procedure assumes that you

know how to navigate through the menu system

on the DC230LP Control Panel. Refer to the

quick reference card,

Using the Menu System,

(701P96834) for assistance.

1. Connect the DC230LP to your network

outlet or cable.

2. Access the System Administration menus:

Press [Online] to take the printer off

line. displays.

Press [Menu].

displays.

Press [], then press [] or [ ] until

displays.

Printer Off Line

Main Menu

System

Administration

For assistance, contact your local Xerox Customer Support Center:

USA: 1-800-821-2797 Canada: 1-800-939-3769

7+('2&80(17&203$1<

DC230LP AppleTalk

Quick Install

Page 2 of 2



To install the DC230LP Macintosh

PPD:

Copy the DC230LP Macintosh PPD

from the CentreWare

CD to the Sys-

tem Folder/Extensions/Printer

Descriptions Folder.

Set up and configure the Print Driver

via the Chooser.

9. Refer to the CentreWare manual,

Getting

Started with Print and Fax Services,

for

additional information.

Additional information on the AppleTalk setup

can be found in the

DC230LP System

Administration Guide, Network Installation and

Troubleshooting

701P98450 Version 1.0, 5-98

Press [] repeatedly to delete the

current entry.

Use the [] or [] key to enter the

first character in the Printer Name.

Press [] to move to the next charac-

ter. Repeat this procedure to enter the

entire Printer Name.

Press [Enter]. **SAVED** is

displayed momentarily, followed by

6. Save all the settings:

Press [Online].

displays.

Press [Enter].

displays. The DC230LP will reboot,

save the settings entered, and print a

Configuration Report in approximately

3 minutes.

7. Check the settings on the Configuration

Report against those entered to be sure

they are correct.

Printer Name

(your entry)

Reset Required

Press ENTER key

Warming Up

Please Wait . . .

Xerox 230 LP Installation guide

Xerox 230 LP Installation guide

Xerox 230 LP Installation guide

Related papers