Merra HCF-0615-BK-BNHD-1 Operating instructions

HCF-0615-BK-BNHD-1
Merra
Brand
Merra
Model
HCF-0615-BK-BNHD-1
Type
Operating instructions
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction
box (not included).
2. Removethecanopybolts(E)andtakethemountingbracket(C)othecanopy(A).
3. Connect the mounting bracket to your junction box using the mounting bolts (B).
4. Make electrical connections using the wire nuts (D).
5. Being careful that no wiring is left exposed, place the canopy against the mounting bracket and
secure it by replacing the canopy bolts.
6. Restore the power and enjoy!
CONTACT US
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.comandwe'llresolveyourissueASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate
app on your smartphone to scan the QR code to the right.
Read these instructions carefully prior to installation.
• Check for electric, gas, and plumbing lines before drilling or consult a professional.
• ALWAYS cut ALLrelevantpowerbeforeinstallingalightingxtureanddonotrestore
power to the line until the lamp has been FULLY installed.
INSTRUCTIONS
HCF-0615-BK HCF-0615-NI Rev. 20 Jul. 2022
V20220720
DANGER!
Mounting Bolt (B) Mounting Bracket (C)
Junction Box
Wire Nut (D)
Canopy Bolt (E)
Canopy(A)
  • Page 1 1

Merra HCF-0615-BK-BNHD-1 Operating instructions

HCF-0615-BK-BNHD-1
Merra
Brand
Merra
Model
HCF-0615-BK-BNHD-1
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents