2. Toro
  3. 08132
08132

Toro 08132 User manual

  • Hello! I am an AI chatbot trained to assist you with the Toro 08132 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What parts are included in the kit?
    What tools are required for installation?
    How do I prepare the machine for installation?
    How do I remove the canopy?
    How do I install the beacon switch?
    How do I install the beacon mount?
    How do I install the beacon?
    How do I install the canopy?
    How do I operate the beacon?
FormNo.3448-173RevA
BeaconKit
Workman®UTXPassengerUtilityVehicle
ModelNo.08132
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
1Nopartsrequired–Preparethemachine.
2Nopartsrequired–Removethecanopy.
3Nopartsrequired–
Removetheconsole(ifyoupreviously
installedtheoverheadconsolekitonly)
androutethewireharness.
4Beaconswitch1Installthebeaconswitch.
Beaconmount1
Bolt2
5Nuts2
Installthebeaconmount.
Beacon1
6Beaconsocketassembly1Installthebeacon.
7Nopartsrequired–Installthecanopy.
Important:YoumustinstalltheOverheadConsoleKit(Model08130)beforeyouinstallthiskit.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.ShiftthetransmissionlevertotheP(Park)position.
3.Shutofftheengineandremovethekey.
4.Disconnectthenegative(-)batterycablefromthebatterypost.
©2021—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3448-173*
2
RemovingtheCanopy
NoPartsRequired
Procedure
Removethebolts,washers,andspacerssecuringthecanopy(Figure1)andremovethecanopy.
Retainthecanopy,bolts,washers,andspacers.
g363987
Figure1
2-personcanopyshown
1.Canopy3.Sealingwasher
2.Hex-headbolt(1/4x1-1/4inches)4.Spacer
2
3
RemovingtheConsoleandRoutingtheWireHarness
IfYouPreviouslyInstalledtheOverheadConsoleKitOnly
NoPartsRequired
Procedure
1.Removethe8screwssecuringtheoverheadconsoleandremovetheoverheadconsole(Figure2).
Retainthe8screwsandoverheadconsoleforlaterinstallation.
g363607
Figure2
2.Removetheconsole-switchbracketfromtheoverheadconsole(Figure3).
Retainthebracketand4screwsforlaterinstallation.
g364119
Figure3
3.Routethewire-harnesslegwiththe2spadeterminalstowardtheleft,rearareaoftheroll-barposts
(Figure4).
3
g364200
Figure4
1.Spadeterminals
4.Installthepreviouslyremovedconsoleusingthe8screws(Figure2).
Torquethe8screwsto339N∙cm(30in-lb).
5.Routethefemale8-socketconnectorlabeledBEACONSWITCHthroughtheopeningwhereyouremoved
theconsoleswitchbracket(Figure5).
g364198
Figure5
4
4
InstallingtheBeaconSwitch
Partsneededforthisprocedure:
1Beaconswitch
Procedure
1.Fromtheundersideofthecabcontrolspanel,presstheplugoutoftheholeshowninFigure6.
g364024
Figure6
1.Plug2.Switch
2.Installtheswitchintotheconsole-switchbracket(Figure6).
3.Aligntheconsole-switchbracketintotheopeningandconnecttherockerswitchtothefemale8-socket
connector(Figure7).
5
g364199
Figure7
4.Securethepreviouslyremovedconsole-switchbrackettotheoverheadconsole(Figure3).Torque
the4screwsto11.3N∙m(100in-lb).
5.Connectthebeaconswitchtothewire-harnessconnectorlabeledBEACONSWITCHintotheholeinthe
controlpanel(Figure6).
5
InstallingtheBeaconMount
Partsneededforthisprocedure:
1Beaconmount
2Bolt
2Nuts
Procedure
Use2boltsand2nutstosecurethebrackettothe
left-siderearliftingpointoftherollbarasshownin
Figure8.
g363962
Figure8
1.Nut3.Bolt
2.Beaconmount
6
6
InstallingtheBeacon
Partsneededforthisprocedure:
1Beacon
1Beaconsocketassembly
Procedure
1.Removethebeaconconnectorfromthebeacon
socket(Figure9).
2.Routethewireharnessupthroughthejamnut,
washer,beaconmount,beaconsocket,and
connectittothebeaconconnector(Figure9).
3.Installthebeaconconnectorintothebeacon
socketbyrotatingthebeaconsocket(Figure9).
Note:Thiswillpreventtwistingofthewire
harness.
4.Mountthebeaconsockettothebeaconmount
withthejamnutincluded(Figure9).
5.Plugthebeaconontothesocketandtighten
thewingnut.
g364022
Figure9
1.Beacon5.Washer
2.Beaconconnector6.Jamnut
3.Beaconsocket7.Wireharness
4.Beaconmount
7
InstallingtheCanopy
NoPartsRequired
Procedure
Securethepreviouslyremovedcanopyusingthe
bolts,washers,andspacers(Figure1).
7
8
ConnectingtheBattery
NoPartsRequired
Procedure
Connectthenegativebatterycabletothebatterypost.
Operation
OperatingtheBeacon
Switch
Pressthebeaconswitchtoactivateanddeactivate
thebeacon.
8
/