Hubbell CHANCE Cluster Operating instructions
- Type
- Operating instructions
STEEL BANDED TRANSFORMER BRACKET
MOUNTING INSTRUCTIONS
Assemble cluster mount and pre-set brackets to approximate pole diameter size by adjusting the all-thread
bolts. Leave the band segment loose on one side so that the mount can be wrapped around the pole. For
ease of handling, a lag screw or nail can be driven into the pole at the mounting location and the cluster
hung on this lag or nail. If two band units are to be installed, a second lag screw 18” down will give the
proper spacing on the units.
hubbellpowersystems.com
5/8” x 1 ¾” or ¾” x 1 ¾”
Machine Bolt
"HD" Series Brackets
¾” x 6” All-thread Bolt
Band Segment
Bracket
Ground Bolt
Rev. 02/2020
©2020 Hubbell Incorporated.
Because Hubbell has a policy of continuous product improvement,
we reserve the right to change design and specifications without notice.
Printed in the U.S.A. | TD_06_141_E
For product inquiries, please contact your local sales
representative or customer service representative.
hubbellpowersystems.com
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection
with installation, operation or maintenance. Should further information be desired or should particular problems arise which are not covered
suciently for the purchaser's purposes, the matter should be referred to Hubbell Power Systems, Inc.
Note: Prefix “HD” indicates heavy duty mount with doubled band bolts (example: HD350)
Standard Mounts: Catalog numbers are designed for 6” to 10-½” pole diameters. Brackets
extend 6” from pole.
Modifications to standard catalog numbers:
Horizontal Adapter Plate (5” x 16”)
C2120012
Vertical Adapter Plate (3” x 14”)
C2110009
Catalog
Number
Band
Segment
Bracket
Vertical
Plate
Horizontal
Plate
5/8 x 1 ¾”
Bolt
¾ x 1 ¾”
Bolt
¾ x 6” Bolt
Ground
Bolt
115 3 1 1 4 4 1
215 2 2 2 8 4 1
315 1 3 3 12 4 1
HD315 1 3 3 12 8 1
PS150 6 2 2 2 8 1
PS250 4 4 4 4 8 1
350 2 6 6 6 8 1
HD350 2 6 6 6 16 1
3100 2 6 6 6 6 8 2
HD3100 2 6 6 6 6 16 2
5150 3 1 1 1 4 1
5250 2 2 2 2 4 1
5350 1 3 3 3 4 1
HD5350 1 3 3 3 8 1
STEEL BANDED TRANSFORMER BRACKET MOUNTING INSTRUCTIONS
-
1
-
2
Hubbell CHANCE Cluster Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hubbell TD06137E_Expanding_Pole_Key_Anchors Installation guide
-
-
-
-
-
-
-
Hubbell P818-2040 Installation guide
-
-
