Hubbell TD06137E_Expanding_Pole_Key_Anchors Installation guide

POLE KEY ANCHORS

Application/Installation

hubbellpowersystems.com

ANCHOR

APPLICATIONS

For reinforcing poles at the ground line where load is unbalanced in soft soils

or in areas subjected to constant high winds.

INSTALL IN THESE

CLASS SOILS

Classes 3, 4, 5 and 6 (200-600 inch-pound with soil test probe)

INSTALLING

EQUIPMENT

REQUIRED

Extra anchor rod, expanding bar and shovel.

LIMITATIONS

ON USE

Will not take the place of guying on a heavily-loaded structure.

STEP #1

Straighten the pole.

STEP #2

Attach anchor to 3/4" Expanding Anchor Rod. Lower

anchor assembly into pole hole (beside the butt of

pole) and bust anchor open with the Expanding/

Tamping bar.

NOTE: If desired, a second pole key anchor may be used

at the top (ground level) of the hole on the opposite side

HOW TO USE EXPANDING POLE KEY ANCHORS

Because Hubbell has a policy of continuous product improvement,

we reserve the right to change design and speciﬁcations without notice.

Printed in the U.S.A. | TD_06_137_E

For product inquiries, please contact your local sales

representative or customer service representative.

hubbellpowersystems.com

STEP #3

Remove rod from anchor and hole.

Backfill and tamp hole.