Oatey 422562 User guide

422562
Oatey
Brand
Oatey
Model
422562
Type
User guide
CLOSET FLANGES
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.321.9532 | Oatey.com
Oatey Co. is part of the Oatey family of companies
©2018 OateySCS. All Rights Reserved. This information is based on data believed to be reliable but Oatey makes no warranties, express or implied, as to its accuracy and assumes no liability arising out of its use. The data listed falls within the normal range
of product properties but should not be used to establish specication limits or used alone as the basis of design. Oatey’s liability to purchasers is expressly limited to the terms and conditions of sale. Oatey is a trademark of Oatey Co. Oatey Co. is part of the
Oatey family of companies. All other trademarks can be found on Oatey.com.
Find us on
04/18
OVERVIEW
OPEN FLANGE
Open ange used primarily in
repair work. Requires a test plug
or cap for pressure testing.
Materials: ABS, PVC or cast
iron. Comes with plastic,
stainless steel or metal ring.
CLOSED FLANGE
Closed ange with pre-installed
ability for pressure testing. Used
primarily in new construction.
Materials: ABS or PVC.
Comes with plastic or stainless
steel ring.
SPECIALTY FLANGE
Specialty anges in 45 degree or
offset allows for margin of error
for drain/pipe alignment.
Materials: ABS or PVC.
Comes with plastic, stainless
steel or metal ring.
REPAIR FLANGE
Replaces broken cast iron
closet anges.
Materials: ABS, PVC or
cast iron.
Used to mount a toilet to the oor, closet anges connect
a toilet to the DWV (Drain, Waste and Vent) system.
Repair/Remodel
Inside Fit
Not Code Approved
Inside/
Outside Fit
Hub
Outside Fit
Spigot
Same size as Pipe
Requires Fitting
Offset
Inside/Outside Fit
45 Degree
Spigot Fit
Requires Fitting
Twist-N-Set
Inside Fit
Not Code Approved
CONNECTIONS
  • Page 1 1

Oatey 422562 User guide

422562
Oatey
Brand
Oatey
Model
422562
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents