Acer Aspire E1-731G User manual

Brand: Acer

Model: Aspire E1-731G

Category: Smartphones

Type: User manual

- 1

Windows 10

Addendum to your

User’s Manual

2 -

This revision: August 2015

The purpose of this addendum

Microsoft is offering upgrades from Windows 7 or Windows 8 to Windows

10. You will notice there are some differences in how Windows 10 works

compared to your older operating system.

This addendum contains updated information for using Windows 10, please

use it in addition to your computer’s User’s Manual.

This does not replace your User’s Manual, and there may be information

included that does not apply to your computer.

Model number: _________________________________

Serial number: _________________________________

Date of purchase: ______________________________

Place of purchase: ______________________________

Important

This addendum contains proprietary information that is protected by

change without notice. Images provided herein are for reference only

and may contain information or features that do not apply to your

computer. Acer Group shall not be liable for technical or editorial errors

or omissions contained in this manual.

Table of contents - 3

TABLE OF CONTENTS

Using the Precision Touchpad 4

Touchpad gestures.................................. 4

Changing touchpad settings .................... 5

Using a Bluetooth connection 7

Enabling and disabling Bluetooth ............ 7

Enable Bluetooth and add a device ............ 7

Connecting to the Internet 9

Connecting to a wireless network............ 9

Connecting to a wireless LAN..................... 9

Connecting with a cable ........................ 13

Built-in network feature ............................. 13

Connecting to a cellular network ........... 13

Acer Bluelight Shield 14

Frequently asked questions 15

Requesting service ................................ 17

Tips and hints for using Windows 10 ..... 19

How do I get to Start? ............................... 19

How do I turn off my computer?................ 19

How do I unlock my computer?................. 19

How do I set the alarm? ............................ 21

Where are my apps?................................. 22

What is a Microsoft ID (account)?............. 22

How do I check for Windows updates?..... 23

Where can I get more information?........... 23

4 - Using the Precision Touchpad

USING THE PRECISION TOUCHPAD

The touchpad controls the arrow (or 'cursor') on the screen. As you

slide your finger across the touchpad, the cursor will follow this

movement. The Precision Touchpad (PTP) is designed to provide a

more uniform, smooth, and accurate touchpad experience. Many

applications support precision touchpad gestures that use one or

more fingers, however, some gestures may not be supported by the

specific application or program you are using.

Touchpad gestures

Single-finger slide

Slide a finger across the touchpad to move the cursor.

Single-finger press or tap

Press the touchpad down, or lightly tap the touchpad with

your finger, to perform a 'click', which will select or start an

item. Quickly repeat the tap to perform a double tap or

'double click'.

Two-finger press

Lightly tap the touchpad with two fingers to perform a

'right click'. In the Start screen, this will toggle the app

commands. In most apps this will open a context menu

related to the selected item.

Two-finger slide

Swiftly scroll through web pages, documents and playlists

by placing two fingers on the touchpad and moving both in

any direction.

Two-finger pinch

Zoom in and out of photos, maps and documents with a

simple finger-and-thumb gesture.

Using the Precision Touchpad - 5

The precision touchpad includes added technology features that help

recognize and prevent unintentional gestures such as accidental taps,

gestures, and pointer movement.

Changing touchpad settings

To change the touchpad settings to suit your personal requirements,

please do the following.

1. In the icon tray in the lower right-hand corner of the screen, select

the Notifications icon to open the Notifications pane.

2. Select All settings.

3. Select Devices > Mouse & touchpad.

Note

The touchpad is sensitive to finger movement; the lighter the touch, the better

the response. Please keep the touchpad and your fingers dry and clean.

6 - Using the Precision Touchpad

4. Now you can adjust the settings to suit your personal needs. You

can change the primary button for left- or right-handed use, turn the

touchpad off if you prefer to use a mouse, or set a delay to prevent

the cursor moving if you accidentally tap the touchpad with your

palm while working. Scroll down to see more settings.

Using a Bluetooth connection - 7

USING A BLUETOOTH CONNECTION

Bluetooth is a technology enabling you to transfer data wirelessly over

short distances between many different types of devices. Bluetooth-

enabled devices include computers, cell phones, tablets, wireless

headsets, and keyboards.

To use Bluetooth, you must ensure the following:

1. Bluetooth is enabled on both devices.

2. Your devices are "paired" (or connected).

Enabling and disabling Bluetooth

The Bluetooth adapter must be enabled on both devices. For your

computer, this may be an external switch, a software setting, or a

separate Bluetooth dongle plugged into the computer’s USB port (if no

internal Bluetooth adapter is available).

Enable Bluetooth and add a device

Every new device must first be "paired" with your computer’s

Bluetooth adapter. This means it must first be authenticated for

security purposes. You only need to pair once. After that, simply

turning on the Bluetooth adapter of both devices will connect them.

Bluetooth on your computer is disabled by default. To enable your

computer’s Bluetooth adapter, do the following:

1. Press the Windows key or select the Windows Start button >

Settings > Devices > Bluetooth, and click the toggle under

Bluetooth to enable/disable it.

2. Your computer will automatically start searching for devices, as well

as make itself visible to other devices.

Note

Please check your devices owner’s manual to determine how to turn on its

Bluetooth adapter.

8 - Using a Bluetooth connection

3. Select the device you wish to pair from the list of discovered

devices, and select Pair.

4. A code displays on your computer, which should match the code

displayed on your device. Select Yes. Then, accept the pairing from

your device.

You can also enter the Bluetooth settings by selecting the

Notifications icon in the lower right-hand corner of the screen to open

the Notifications pane. From here, you can enable or disable

Bluetooth or right-click on Bluetooth > Go to settings to enter the

Bluetooth settings.

Note

Some devices using older versions of the Bluetooth technology require both

devices to enter a PIN. In the case of one of the devices not having any inputs

(as in a headset), the passcode is hardcoded into the device (usually "0000"

or "1234"). Consult your device’s user manual for more information.

Connecting to the Internet - 9

CONNECTING TO THE INTERNET

This chapter includes general information on types of connections,

and getting connected to the internet. Some of this information may

not apply to your computer. For detailed information, please refer to

Network connections on page 60.

Your computer’s built-in network features make it easy for you to

connect your computer to the internet using a cable or a wireless

connection.

First though, in order to connect to the internet, you’ll need to sign up

for internet services from an ISP (Internet Service Provider) -- usually

a phone or cable company -- that will have to go to your home or

office to set up internet service. The ISP will install a small box, a

router or modem, that will allow you to connect to the internet.

Connecting to a wireless network

Connecting to a wireless LAN

A wireless LAN (or WLAN) is a wireless local area network, which can

link two or more computers without using wires. Once connected to

WLAN, you can access the internet. You can also share files, other

devices, and even your internet connection itself.

Your computer's wireless connection is turned on by default and

Windows will detect and display a list of available networks during

setup. Select your network and enter the password if required.

Acer notebook computers feature an Airplane mode hotkey that turns

the network connection on or off. You can use the network

Warning

Using wireless devices while flying in aircraft may be prohibited. All

wireless devices must be switched off before boarding an aircraft and

during take-off, as they may be dangerous to the operation of the

aircraft, disrupt communications, and even be illegal. You may turn on

your computer’s wireless devices only when informed that it is safe to

do so by the cabin crew.

10 - Connecting to the Internet

management options to turn your wireless network on/off or control

what is shared over the network.

To connect to a wireless network, please follow the steps below.

1. Ensure you have a wireless router/access point and current internet

connection through the ISP of your choice. Make a note of the

wireless network’s name and password (if necessary). If you are

trying to connect to a public network (such as at a coffeeshop),

make sure you have the wireless network’s name.

2. In the icon tray in the lower right-hand corner of the screen, select

the Notifications icon to open the Notifications pane.

3. Select All settings.

Note

Please refer to your ISP or router documentation for details on connecting to

the internet.

Connecting to the Internet - 11

4. Select Network & internet.

5. You will see a list of available wireless networks. Select the one you

wish to use.

12 - Connecting to the Internet

6. Once you select a wireless network, select Connect.

7. If required, enter the network’s password.

Connecting to the Internet - 13

Connecting with a cable

Built-in network feature

Plug one end of a network cable into the network port on your

computer, and the other end into a port on your router. (Refer to the

image below.) Then, you'll be ready to get online.

Connecting to a cellular network

If your computer has a SIM slot, you can connect to the internet using

a cellular phone network. To do this, you must have a compatible SIM

card and a data contract with your cellular provider. Contact your

cellular provider for more information on connecting to the internet

using a cellular network.

14 - Acer Bluelight Shield

ACER BLUELIGHT SHIELD

Acer Bluelight Shield can be enabled to reduce the blue-light

emissions from the screen to protect your eyes.

To configure Acer Bluelight Shield, Search for ’Acer Quick Access’.

From here you can toggle Acer Bluelight Shield on or off, and you can

choose from four different modes to fit your needs:

No. Item Description

Low

Reduction

Reduces blue light emission from the LED backlit

screen by 10% to 25% for basic protection.

Medium

Reduction

Reduces blue light emission from the LED backlit

screen by 26% to 45% to protect your eyes.

High

Reduction

Reduces blue light emission from the LED backlit

screen by 46% to 65% for maximum protection.

Long Hour

Mode

Professionally tuned to reduce eye strain over an

extended period of time.

Note

Specifications vary depending on model.

Frequently asked questions - 15

FREQUENTLY ASKED QUESTIONS

The following is a list of possible situations that may arise during the

use of your computer. Easy solutions are provided for each one.

I turned on the power, but the computer does not start or boot up.

Look at the power indicator:

• If it is not lit, no power is being supplied to the computer. Check the

following:

• If you are using on the battery, it may be low and unable to power

the computer. Connect the AC adapter to recharge the battery

pack. You may need to wait a few minutes before trying to turn

your computer on again.

• Make sure that the AC adapter is properly plugged into the

computer and to the power outlet.

• If it is lit, check the following:

• Is a disc in the optical drive? Remove it and press <Ctrl> + <Alt>

+ <Del> to restart the system.

• Do you have a USB storage device (USB drive or smartphone)

plugged into your computer? Unplug it and press <Ctrl> + <Alt> +

<Del> to restart the system.

Nothing appears on the screen.

The computer’s power management system automatically blanks the

screen to save power. Press any key to turn the display back on.

If pressing a key does not turn the display back on, three things might

be the cause:

• The brightness level might be too low. Press <Fn> + < > (increase)

to adjust the brightness level.

• The display device might be set to an external monitor. Press the

display toggle hotkey to toggle the display back to the computer.

• If the power LED is flashing, the computer may be in Sleep or

Hibernate mode. Press and release the power button to resume.

No audio is heard from the computer.

Check the following:

16 - Frequently asked questions

• The volume may be muted. Look at the volume control (speaker)

icon in the taskbar. If it is crossed-out, click the icon and deselect the

Mute all option.

• The volume level may be too low. Check the volume from the

volume control (speaker) icon in the taskbar. You can also use the

volume control hotkeys to adjust the volume.

• If headphones, earphones or external speakers are connected to

the headphone jack on the computer, the internal speakers

automatically turn off.

I want to eject the optical drive tray without turning on the power.

There is a mechanical eject hole on the optical drive. Simply insert the

tip of a pen or straightened-out paperclip into the hole and push to

eject the tray.

The keyboard does not respond.

Try attaching an external keyboard to a USB port on the computer. If it

works, contact your dealer or an authorized service center as the

internal keyboard cable may be loose.

The printer does not work.

Check the following:

• Make sure that the printer is connected to a power outlet and that it

is turned on.

• Make sure that the printer cable is connected securely to a USB port

and the corresponding port on the printer.

Frequently asked questions - 17

I want to restore my computer to its original settings.

This recovery process helps you restore the C: drive with the original

software content that is installed when you purchased your computer.

Before performing a restore operation, please check the BIOS

settings.

1. Check to see if Acer disk-to-disk recovery is enabled or not.

2. Make sure the D2D Recovery setting in Main is Enabled.

3. Exit the BIOS utility and save changes. The system will reboot.

For more information, see Recovering your system on page 100.

Requesting service

International Travelers Warranty (ITW)

Your computer is backed by an International Travelers Warranty

(ITW) that gives you security and peace of mind when traveling. An

ITW passport came with your computer and contains all you need to

know about the ITW program. A list of available, authorized service

centers is in this handy booklet. Read this passport thoroughly.

Always have your ITW passport on hand, especially when you travel,

to receive the benefits from our support centers. Attach your proof-of-

purchase to the ITW passport.

Note

If your system is the multilingual version, the operating system and language

you choose when you first turn on the system will be the only option for future

recovery operations.

Warning

Your C: drive will be reformatted and all data will be erased. It is

important to back up all data files before using this option.

Note

To activate the BIOS utility, press <F2> when you see the Acer logo during

boot up.

18 - Frequently asked questions

If the country you are traveling in does not have an Acer-authorized

ITW service site, you can still get in contact with our offices worldwide.

Please visit www.acer.com.

Before you call

Please have the following information available when you call Acer for

online service, and please be at your computer when you call. With

your support, we can reduce the amount of time a call takes and help

solve your problems efficiently. If there are error messages or beeps

reported by your computer, write them down as they appear on the

screen (or the number and sequence in the case of beeps).

You are required to provide the following information:

Name: _______________________________________

Address: ______________________________________

Telephone number: _____________________________

Machine and model type: _________________________

Serial number: _________________________________

Date of purchase: ______________________________

Frequently asked questions - 19

Tips and hints for using Windows 10

We know this is a new operating system that will take some getting

used to, so we've created a few pointers to help you get started.

How do I get to Start?

Press the Windows key or select the Windows Start button on the

lower left-hand corner of the screen.

Where’s the Start button?

The Start button will appear in the desktop taskbar. Selecting it will

open Start where you can launch apps.

How do I see all of my apps?

Press the Windows key or select the Windows Start button and select

All apps to show a list of installed apps on the computer.

How do I turn off my computer?

Press the Windows key or select the Windows Start button and select

the power icon > Shut down. You can also turn off the computer by

right-clicking the Windows Start button > Shut down or sign out >

Shut down.

Can I turn off notifications?

You can turn off notifications so that you can leave your computer

running, but not be disturbed by notifications.

Press the Windows key or select the Windows Start button and select

Settings > System > Notifications & actions. From here you can

enable/disable notifications for all of your apps or choose which apps

to enable/disable.

How do I unlock my computer?

Press the space bar and select a user account icon to unlock the

computer. If your account has a password set, you will need to enter

the password to continue.

Frequently as

20 - Frequently asked questions

Can I personalize the Lock screen?

You can personalize the lock screen with a different image, to run a

slideshow of images, or to show you quick status and notifications to

suit your personal needs.

To change the background, press the Windows key or select the

Windows Start button and select Settings > Personalization. From

here you can:

• Select a background image for the lock screen

• Turn the Slide show on or off

• Select lock screen apps.

How do I set up the lock screen slideshow?

1. Press the Windows key or select the Windows Start button and

select Settings > Personalization.

2. Under Background, select Slideshow.

3. Select Add a folder and open the folder you wish to use (your

Pictures folder will open by default). Select Choose this folder to

add the folder to the lock screen slideshow.

4. Select a folder and select Remove to remove the folder from the

lock screen slideshow.

5. Change the other settings to suit your needs.

How do I move tiles?

Select a tile and drag it to the place on Start that you want it to

appear. Other tiles will be moved to accommodate the tile in its new

location.

Can I arrange tiles in groups?

Yes, you can. Select an existing tile and drag the tile to arrange Start

to your liking. Right-click on an app and select Pin to Start to create a

new group on Start. From here, you can drag the tile to an existing

group on Start. You can give the group(s) a name and arrange the

tiles within the groups to suit your needs.

Can I make tiles bigger or smaller?

Yes, you can. Right-click on a tile and select Resize. Select a size

from the menu that appears.

Page is loading ...

Acer Aspire E1-731G User manual

Brand: Acer

Model: Aspire E1-731G

Category: Smartphones

Type: User manual

Download PDF

report

Acer Aspire E1-731G User manual

Acer Aspire E1-731G User manual

Related papers

Other documents