2. APsystems
  3. 4300805302 25A AC Connector

APsystems 4300805302 25A AC Connector, 25A AC Connector Installation guide

  • Hello! I am an AI chatbot trained to assist you with the APsystems 4300805302 25A AC Connector Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2018/1/15 Rev1.1
1
APsystems
8701 N. Mopac Expy, Ste 160, Austin, TX 78759
Tel : 844-666-7035
apsystems.com
25A AC Connector (EN,5-wire) Field Wiring
Installation Guide
(For USA)
Tools: Cross screwdriver, wire striper, solid wrench or monkey wrench.
Step 1. Verify the AC connector: Type is 25A AC Male Connector (EN,5-wire) or 25A
AC Female Connector (EN,5-wire).
Step 2. Wire Stripping
Wire gauge：5x2.5mm²(14AWG) or 4x2.5mm² (14AWG~12AWG)
Cable OD：10mm~13mm
Wire stripping size (mm ):Earth wire is supposed to be longer than Live wire and Neutral wire.
Step 3. Wiring cables to the AC connectors.
a. Set the parts on the cable according to the order of 1→2→3→4.
25A AC Male Connector(EN,5-wire)
25A AC Female Connector(EN,5-wire)
4 Body
3 Seal body
1Nut
2Claw
2018/1/15 Rev1.1
2
APsystems
8701 N. Mopac Expy, Ste 160, Austin, TX 78759
Tel : 844-666-7035
apsystems.com
b. Crimp wires: the plastic core of connector is printed, please wire according to the print, ( If
the 4-wire cable can be empty),screw twisting torque
mN 1.0/8.0
.
c. Push Housing into Body until hear the the click sound.
d. Insert Seal and Clamp Finger into Body, then tighten the nut, torque
e. Installation of cable end female connector is the same as male connector.
25A AC Female Connector
Installation completed
Plastic Core
click
mN 5.0/0.4
/