Tools You Will Need
• Rubber mallet
BOX CONTENTS
ASSEMBLY INSTRUCTIONS
1
2
3
1 2
support@zippity-outdoor.com Toll Free Phone: 1 877 234 6196
1. Install your WF29002 fence panels (sold
separately) as per the included installation
guides. When you get to the area where you
would like your gate, attach the gate to the
panel by dropping a stake down through the
eye hooks of the panel and gate together at
the same time. Drive the stake into the
ground with a rubber mallet.
2. 35.5in from your gate stake, install
another panel by driving a stake into the
ground through the eye holes of the panel.
3. Connect the gate latch to the stake.
42in Tall Zippity Garden Fence Gate
Check Box for These Contents
In the event of missing or defective parts please call our customer service
department at 877-234-6196
(Mon-Fri 8AM to 5PM ET).
1.
Metal gate with latch (1)
2. Metal stake (1)
This gate is designed to be used with the 42in Tall Zippity
Metal Garden Fence (WF29002- sold separately as a 5
pack with 6 stakes). This gate cannot be used as a
standalone unit as it only comes with one stake.
!
33in
35in
51in
41in36in
3
Panel
(purchase separately)
Gate Panel
(purchase separately)
/
