Warrior Products S907GTC Installation guide

Type
Installation guide
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warrior Products, Inc.
GAS TANK COVERS
DIAMOND PLATE / STEEL
All “GAS TANK COVERS” are designed to be placed over the existing factory
metal gas tank support.
1) Be sure that your original cover is in good repair before installing your Gas
Tank Cover. A little gas tank work may be needed.
2) Your Gas Tank Cover uses existing bolts that secure your existing factory
tank in place. The small holes in your new cover are the only mounting
points. The larger holes are for clearance only. Remove the bolts from your
stock tank cover that correspond to the small holes in your new cover.
3) Work your new cover in over the existing cover and reinstall using the bolts
that you removed. Tighten to factory specifications.
CONGRATULATIONS! You have finished your installation. Enjoy your new
Warrior Products Gas Tank Cover and be sure to look for other quality
Warrior Products for your vehicle.
Thanks for purchasing Warrior Products!
Warrior Products, Inc.
11100 SW Industrial Way
Tualatin, Oregon 97062
(503) 691-8915
(503) 692-0364 FAX
(888) 220-6861 Toll Free
wp@warriorproducts.com
Your Knight in Shining Armor!”
  • Page 1 1

Warrior Products S907GTC Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI