Chore-Time MT2336A CHORE-TRONICS® 6 Amp Model 24 Variable Speed Kit Operating instructions

Brand
Chore-Time
Model
MT2336A CHORE-TRONICS® 6 Amp Model 24 Variable Speed Kit
Type
Operating instructions
Caution, Warning and Danger Decals have been placed on the equipment to warn
of potentially dangerous situations. Care should be taken to keep this information
intact and easy to read at all times. Replace missing or damaged safety decals
immediately.
DANGER: Electrical Hazard
Disconnect electrical power before inspecting or servicing equipment unless
maintenance instructions specifically state otherwise. Ground all electrical
equipment for safety. All electrical wiring must be done by a qualified electrician in
accordance with local and national electric codes. Ground all non-current carrying
metal parts to guard against electrical shock. With the exception of motor overload
protection, electrical disconnects and over current protection are not supplied with
the equipment.
CTB Inc.
P.O. Box 2000 • Milford, Indiana 46542-2000 • U.S.A.
Phone (574) 658-4101 • Fax (877) 730-8825
Email: [email protected] • Internet: http//www.ctbinc.com
6 Amp Model 24
Variable Speed Kit
Instruction
MT2336AMarch 2009
2
MT2336A
Variable Speed Kit pn (46568) Wiring
CTB Inc.
P.O. Box 2000 • Milford, Indiana 46542-2000 • U.S.A.
Phone (574) 658-4101 • Fax (877) 730-8825
Email: ctb@ctbinc.com • Internet: http//www.ctbinc.com
RED
BLK
WHT.
SWITCHES SET
FOR VAR. SP. #2
ON
OFF
AUTO
CONNECT THE FLAT CABLE SUPPLIED
WITH THE KIT FROM THE I/O BOARD TO
VARIABLE SPEED MODULE AS SHOWN.
1 2
MOUNT THE VSM MODULES
TO THE METAL BASE PLATE
WITH THE BLACK PLASTIC
MOUNTING HARDWARE
SUPPLIED WITH THE KIT.
MOUNT THE
ON - OFF - AUTO
SWITCH TO THE SIDE OF
THE CONTROL AS SHOWN.
I/O BOARD
230 VAC
CIRCUIT
BREAKER
FOR
VAR SPEED
FAN(S) #1
VARIABLE
SPEED
FAN(S) #1
L1
INTERNAL BASE PLATE OF
MODEL 24
MAXIMUM
6 AMPS
FULL LOAD
(230 VAC)
USE THE SHORT PVC
CONDUIT SUPPLIED WITH
THE KIT TO CONNECT THE
EVS TO THE MODEL 24
CONTROL.
DO NOT MOUNT THE
EVS FARTHER AWAY THAN
THE CONDUIT WILL ALLOW.
MAXIMUM
6 AMPS
FULL LOAD
(230 VAC)
L1
VARIABLE
SPEED
FAN(S) #2
EVS BOX
MOUNT THE VSM MODUL
E
TO THE METAL BASE
PLATE
WITH THE BLACK PLASTI
C
MOUNTING HARDWARE
SUPPLIED WITH THE KIT.
SWITCHES
SET FOR
VAR SP #2
1 2
230 VAC
CIRCUIT
BREAKER
FOR
VAR SPEED
FAN(S) #2
  • Page 1 1
  • Page 2 2

Chore-Time MT2336A CHORE-TRONICS® 6 Amp Model 24 Variable Speed Kit Operating instructions

Brand
Chore-Time
Model
MT2336A CHORE-TRONICS® 6 Amp Model 24 Variable Speed Kit
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers