Motorola DCX 3400-M Installation guide

Brand: Motorola

Model: DCX 3400-M

Type: Installation guide

SHAW HDPVR

INSTALLATION INSTRUCTIONS

(Approx. Hardware Setup Time: 10-15 Minutes)

STEP 1

DO YOU HAVE EVERYTHING?

The following components are included in the package that your HDPVR came in:

Cable Cord (Coax) Power Cord HDMI Cable IR Receiver + Tether Cord

(Optional Use)

Shaw Universal Remote Motorola DCX 3400-M HDPVR

STEP 2

TIME TO HOOK UP YOUR NEW HARDWARE.

B. Find a location to put your new hardware that will allow

it to breathe.

C. Screw one end of the

included white cable cord

(with silver ends) in to your

wall cable outlet and the

other end in to CABLE IN

on the back of the HDPVR.

For an optimal viewing

experience, we recommend

using the included cable

cord instead of any others

that you might have around.

A. Your serial number, “Host SN,” is located on the back

of the HDPVR (next to the number 3) and starts with

the letter “M”. Alternatively, you can  nd the serial

number on the white sticker labeled “S/N” on the

HDPVR packaging.

Before you hook up your HDPVR, write your serial

number and account number below. You will need it

when you contact us to activate your new hardware.

Wall Outlet

Cable InCable Out

Serial Number:

Account Number:

D. Connect the included HDMI cable (black cable with

 at gold ends) from the HDPVR to your TV. Both video

and audio travel through HDMI cable. Note the input

you plug your HDMI cable into on the back of your TV

(i.e. HDMI 1, HDMI 2, etc.). For more advanced audio/

video setups, please refer to the manufacturers guide

included with your HDPVR.

E. Connect the included power adapter from the wall

power outlet to the HDPVR.

HDMI Out

HDMI In

Television

Power Cord

STEP 3

NOW WE JUST NEED TO GET YOUR BOX ACTIVATED.

A. Turn on your HDPVR by pressing the power button on the front of the box. After a couple of seconds the blue

power indicator will light up to con rm the box has power. The display on the front of your HDPVR may display

multiple messages once it is powered on, this is normal.

B. Select the High De nition (HD) input (i.e. HDMI 1, HDMI 2, etc.) that you plugged the HDPVR into in step 2-D.

C. Activate your HDPVR online by visiting SHAW.CA/ACTIVATIONS. Make sure you have your serial number and

account number ready. If you do not have Internet access, or need additional help, please call us at 1.888.270.2433

D. The IR Receiver can be plugged in to EXT IR IN on the back of the HDPVR if you wish to place your HDPVR out of

sight (i.e. in a cabinet). The IR Receiver should be placed somewhere that your remote will have a clear line

of sight to.

E. To program your Shaw Universal Remote to work with your TV (adjust volume etc.), follow the “Quick Setup”

instructions on the reverse of the remote or visit www.urcsupport.com/shaw.

Note: Once your HDPVR is activated it may take a few minutes for your on-screen programming

guide to display and up to 30 minutes for program information to load.

Power Button

HDPVR_3400_INSTALL_SEPT12

Motorola DCX 3400-M Installation guide

Motorola DCX 3400-M Installation guide

Motorola DCX 3400-M Installation guide

Related papers

Other documents