SHAW HD BOX
INSTALLATION INSTRUCTIONS
(Approx. Hardware Setup Time: 10-15 Minutes)
STEP 1
|
DO YOU HAVE EVERYTHING?
The following components are included in the package that your HD box came in:
Cable Cord (Coax) Power Pack HDMI Cable IR Receiver + Tether Cord
(Optional Use)
Shaw Remote Motorola HD Box
STEP 2
|
TIME TO HOOK UP YOUR NEW HARDWARE.
B. Find a location to put your new hardware that will allow
it to breathe.
C. Screw one end of the
included white cable cord
(with silver ends) in to your
wall cable outlet and the
other end in to CABLE IN
on the back of the HD box.
For an optimal viewing
experience, we recommend
using the included cable
cord instead of any others
that you might have around.
A. Your serial number, “Host SN,” is located on the back
of the HD box (next to the number 3) and starts with
the letter “M”. Alternatively, you can nd the serial
number on the white sticker labeled “S/N” on the HD
box packaging.
Before you hook up your HD box, write your serial
number below. You will need it when you contact us to
activate your new hardware.
Serial Number:
Wall Outlet
Cable InCable Out
D. Connect the included HDMI cable (black cable with
at gold ends) from the HD box to your TV. Both video
and audio travel through HDMI cable. Note the input
you plug your HDMI cable in to on the back of your TV
(i.e. HDMI 1, HDMI 2, etc.). For more advanced audio/
video setups, please refer to the manufacturers guide
included with your HD box.
E. Connect the included power adapter from the wall
power outlet to the HD box.
HDMI Out
HDMI In
Television
Power Pack
STEP 3
|
NOW WE JUST NEED TO GET YOUR BOX ACTIVATED.
A. Turn on your HD box by pressing the power button on the front of the box. After a couple of seconds the blue
power indicator will light up to con rm the box has power. The display on the front of your HD box may display
multiple messages once it is powered on, this is normal.
B. Tune your TV to the High De nition (HD) input (i.e. HDMI 1, HDMI 2, etc.) that you plugged the HD box into in
step 2-D. You may see a blue box appear on your TV, this is normal.
C. Activate your HD box by calling us at 1.888.270.2433. Make sure you have the serial number of your new
equipment ready.
D. The IR Receiver can be plugged in to EXT IR IN on the back of the HD box if you wish to place your HD box out
of sight (i.e. in a cabinet). The IR Receiver should be placed somewhere that your remote will have a clear line
of sight to.
E. To program your Shaw remote to work with your TV (adjust volume etc.), follow the “Quick Setup” instructions on the
reverse of the remote or visit www.urcsupport.com/shaw.
Once you’re all set up, watch a quick video that highlights the exciting features of your new guide.
To access, press the MENU button on your remote and select “Help”.
Power Indicator
Power Button
HD_INSTALL_AUG12
/
