Smith & Noble Solar & Roller Shades Step By Step Installation Instructions

Brand: Smith & Noble

Model: Solar & Roller Shades

Type: Step By Step Installation Instructions

Solar & Roller

Shades

STEP BY STEP INSTALLATION INSTRUCTIONS

Motivia

™

Motorization

Remote Control

smithandnoble.com

800.248.8888

Table of Contents

Step 1 - Getting Started ..................................3

Overview - Motorization with No Headrail ....................4

Step 2 - Mounting the Brackets ...........................5

Step 3 - Hanging the Shade ..............................6

Overview -

Motorization with Cassette/2 on 1 Headrail

............7

Step 2 - Mounting the Brackets ......................... 8-9

Step 3 - Hanging the Shade .............................10

Overview - Motorization with Metal Valance .................11

Step 2 - Mounting the Brackets ..........................12

Step 3 - Hanging the Shade .............................13

Step 4 - Attaching the Valance ...........................14

Linking the Remote .........................................15

Operating the Remote Controls ..............................16

Optional — Hold down brackets .............................17

Skew Adjustment ...............................17

Recharging the Shade ......................................17

Care & Cleaning Instructions ................................18

Safety ....................................................18

Troubleshooting ...........................................18

Warranty ..........................................Back Cover

A Smooth Set-Up

We want you to love your new window coverings and that

includes having a smooth installation experience.

We recommend

saving this guide.

If you encounter any difculties or questions,

please reach out to us for help. It’s why we’re here. Call us at

800.248.8888 for more info on installation.

We recommend you hold on to all packaging until your window

coverings are fully installed. Should something go wrong

(we strongly doubt it), we want any potential returns to be as

painless as possible.

Customer Service Hours

Monday — Friday: 6am — 6pm PT

Saturday — Sunday: 7am — 4pm PT

smithandnoble.com

Everything

You Need

smithandnoble.com

800.248.8888

First, make sure you have all the parts and tools required to install your shades.

ALL THE HARDWARE YOU’LL NEED:

Pencil, screw-driver, ¼” nut driver, level, and a drill with a

⁄16” drill bit.

Then nd wooden studs where you’ll want to attach the brackets; if you need to mount your

shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For

metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile

surfaces, use a masonry drill and appropriate plugs, anchors, or screws.

It’s important when selecting a fastener to make sure it’s designed to support the weight of the

shade. Follow the fastener manufacturer’s instruction from there on out.

Getting Started

Step 1 — Parts & Tools

Overview

Motorization with No Headrail -

Remote Control

ROLLER

SHADE

BRACKET BRACKET

4 5

REMOTE

CONTROL

BOTTOM BAR

BRACKETS FOR SHADES

WITH METAL VALANCE

HOLD DOWN

BRACKET

(OPTIONAL)

EXTENSION &

SIDE BRACKET

(OPTIONAL)

SCREWS

PENCIL & SCREWDRIVER

(NOT INCLUDED)

POWER DRILL & LEVEL

(NOT INCLUDED)

CHARGER

CASSETTE

MOUNTING

BRACKET

SPACER

BLOCK

(OPTIONAL)

BRACKET

FOR SHADES

WITHOUT

HEADRAIL

METAL VALANCE

BRACKET COVER

(OUTSIDE MOUNT ONLY)

NO HEADRAIL BRACKET

COVERS OUTSIDE MOUNT

(OPTIONAL FOR INSIDE MT)

METAL

VALANCE

CLIP

BRACKETS FOR

DUAL ROLLER SHADES

BRACKET COVERS

(OUTSIDE MOUNT)

smithandnoble.com

800.248.8888

Inside Mount

The installation brackets are always

mounted so that the short legs face

in. Brackets must be in line and level.

Shim brackets on inside mounts if

necessary. The roller must be level

for the shade to operate properly.

Attach each bracket using two screws

either up through the top (A) or

through the side (B).

Inside Mount No Headrail

with Bracket Covers

Place the brackets

⁄16" from the window

casing. This will create a gap for the

bracket cover.

Attach each bracket using two through

the top holes. Do not use side holes.

Outside Mount

The installation brackets are always

mounted so that the short legs face

in. Brackets must be in line and level.

The roller must be level for the shade

to operate properly.

First, hold the shade above the

window so that it's perfectly centered

over the window opening at the

desired height. Mark the position of

the brackets on the wall. Mount the

brackets to the wall. Make sure the

mounting brackets are level.

Step 2 — Mounting Brackets

Hanging Shades

without Headrail

Once the brackets are secured and

level, the fabric roll can be inserted.

Make sure your hands are clean to avoid

soiling the shade. Be sure the motor

and roller end plug are inserted into

the roller.

Hold the shade with the bottom of the

motor facing the floor. Be sure the shade is

fully rolled on the tube.

Insert the spring loaded pin end into the

round hole of the bracket.

Push the motor end toward the pin end

to compress the spring. The pin should

compress half way in for best fit. Line up

the hooks on the motor with the two slots

in the bracket. Allow the spring to release

and let the hooks go into the slots.

Once the two hooks are through the

slots, gently pull down on the motor until

the hooks lock securely to the bracket.

Bracket Covers

Bracket covers come standard for

outside mount shades and if requested

for some non-ush inside mounted

shades. If your shade came with bracket

covers, slide or snap the bracket covers

into place over the bracket.

Dual Roller Shades

Install shades into the dual roller

brackets in the same manner as above.

Make sure that the fabric on the lower

shade rolls off the back of the roller

(standard roll) and that the fabric on

the upper front shade rolls off the front

of the roller (reverse roll).

Step 3 — Hanging the Shade

No Headrail

Dual Roller

1/16"

Gap

No Headrail

Dual Roller

No Headrail with Bracket Cover

No Headrail

No Headrail with Bracket Cover

Dual Roller with Bracket Cover

(Outside Mount Only)

Dual Roller

No Headrail

Room

Side

smithandnoble.com

800.248.8888

Motorization with Cassette - 2 on 1 Headrails,

Remote Control

Overview

DECORATIVE

CASSETTE

4 5

REMOTE

CONTROL

Inside Mount

Center the shade in the window frame.

Mark the position of the brackets. End

brackets should be located 2" in from

each end. Mount the brackets to the

top of the window frame. Make sure the

brackets are aligned. Space additional

brackets evenly between two end

brackets.

Side Mount (optional)

Measure from window sill up to desired

mounting position. Mount Side Mount

Brackets on each side of window frame

as shown. Make sure to confirm that

headrail will sit perfectly level. Once

Side Mount Brackets are installed

and properly positioned, attach the

Standard Mounting Brackets using the

nuts and bolts provided.

Step 2 — Mounting Brackets

2 on 1 Headrail with Remote Control

Inside Mount

Shallow Mount - Minimum 1

” surface

Flush Mount - Minimum 3

⁄4” surface

BOTTOM BAR

smithandnoble.com

800.248.8888

Step 2 — Mounting Brackets

Outside Mount

First, hold the shade above the

window so that it’s perfectly centered

over the window opening at the

desired height. Mark the position of

the bracket on the wall. End brackets

should be located 2" from each end.

Mount the brackets to the wall.

Make

sure the mounting brackets are level.

If needed, space additional brackets

evenly between two end brackets.

Extension Brackets (optional)

Optional Extension Brackets are

used

to project the back of the shade up

to 2

⁄2" from the mounting surface.

Attach the Standard Mounting Bracket

to the Extension Bracket with the nut

and bolt provided.

Spacer Blocks (Optional)

Each spacer block projects brackets

3/8" away from mounting surface.

Position spacer block behind mounting

bracket, make sure the brackets are

level and aligned. Attach each bracket

using two screws. Screws should be

long enough to secure the bracket to

the mounting surface.

EXTENSION

BRACKET

HEADRAIL

MOUNTING

BRACKETS

Hanging the Shade

Insert the rail into the opening of the

bracket. Push the rail back until it is

fully engaged.

Removing the Shade

To remove the shade, partially lower the

shade and insert a flat head screwdriver

as shown. Twist the screwdriver until the

headrail disengages from the bracket.

Step 3 — Hanging the Shade

Push the rail back until it

is fully engaged

Push the rail back until it

is fully engaged

Push the rail back until it

is fully engaged

SPACER

BLOCK

RAIL

BRACKET

smithandnoble.com

800.248.8888

Motorized with Metal Valance - Remote Control

Overview

4 5

REMOTE

CONTROL

BOTTOM BAR

Inside Mount

The installation brackets are always

mounted so that the rounded edge

faces down. Brackets must be in line

and level. Shim brackets on inside

mounts if necessary. The roller must be

level for the shade to operate properly.

Attach each bracket using two screws

either up through the top (A) or

through the side (B).

Outside Mount

The installation brackets are always

mounted so that the rounded edge

faces down. Brackets must be in line

and level. The roller must be level for

the shade to operate properly.

The brackets can be mounted to

wall or window frame. Make sure

the mounting brackets are level. The

brackets are always mounted so that

the inner surfaces face each other.

Brackets are mounted with the open

end down.

Step 2 — Mounting Brackets

INSIDE MOUNT

OUTSIDE MOUNT

METAL

VALANCE

smithandnoble.com

800.248.8888

Step 3 — Hanging the Shade

Step 4 — Attaching the Valance

Hanging the Shade

Once the brackets are secured and level, the

fabric roll can be inserted. Make sure your

hands are clean to avoid soiling the fabric.

Be sure the motor and roller end plug are

inserted into the roller. Hold the shade with

the bottom of the motor facing the floor. Be

sure the shade is fully rolled on the tube.

Insert the spring loaded pin end into the

round hole of the bracket.

Push the motor end toward the pin end

to compress the spring.

The pin should

compress half way in for best t.

Line up

the hooks on the motor with the two slots in

the bracket. Allow the spring to release and

let the hooks go into the slots.

Once the two hooks are through the slots,

gently pull down on the motor until the

hooks lock securely to the bracket.

Attaching the Valance

Insert a valance clip into the bottom front

keyhole slot of each bracket.

Press the bottom firmly to lock into place.

Hold the valance on the top of the bracket

first, and rotate downward.

Press until the bottom hook feature on

the valance engages and is locked to the

valance clip.

Bracket Covers - Outside Mount

Press the covers onto the brackets as

shown. Covers will snap in place.

Bracket Covers - Inside Mount

Peel adhesive backing and stick cover

over exposed portion of installation

bracket.

PULL

LOCKED

"L"

PORTION OF

VALANCE

BRACKET

COVER

PRESS

smithandnoble.com

800.248.8888

Operating the Remote ControlLink the Remote

Link the Remote Control

For added protection, your remote control

arrived with a protective lm on the top.

Please remove this lm prior to use.

The remote control has multiple channels.

Before linking the remote, determine which

shade(s) you want on

which channel. The standard remote has 5

channels. All shades linked to the remote

will also automatically be programmed to

the "ALL" channel.

1. Press the SETTING button on the motor

until the shade jogs twice. Release the

button immediately after the rst jog – this

should not be more than 3 seconds.

2. Select the channel that you want to

program using the CHANNEL selector

button.

3. Press and hold the CONFIRM button until

the shade(s) jogs once. The shade is now

linked to the remote.

4. Repeat steps 1-3 to program the rest of

the shades.

Remote Control

Select the desired channel with the

CHANNEL key. The channel indicator

light will illuminate the channel that is

on. If all 5 lights are lit, the remote will

control all 5 channels at once.

Tapping the UP or DOWN keys for less

than 2 seconds will move the shade in

short steps. Holding the UP or DOWN

keys down for more than 2 seconds

before releasing, will operate the

shade in the faster standard speed.

Press the UP or DOWN keys to raise or

lower the shade. Press the STOP key

to stop the shade anywhere along the

window.

Setting and Using a Favorite

Position:

Use the UP or DOWN buttons to

position the shade at the desired

“favorite” position. First press and

hold the LIMIT button on the back of

the remote with a small screwdriver or

tip of a pen. While holding the LIMIT

button press and hold the UP button.

Release both buttons

when the shade jogs.

With the shade at either the upper

or lower limit, simply press the

STOP button to bring the shade to

the “favorite” position. To go to the

“favorite” position from any other

location, make sure the shade has been

stopped for at least three seconds

before pressing the STOP button.

Refer to the Motorization Guide for

additional details.

Setting

(Red Button)

Charging Port

Shade Motor

Channel

Display

Stop

Down

Channel +

Channel —

Front of Remote

Back of Remote

Limit Button

Conrm Button

smithandnoble.com

800.248.8888

Troubleshooting

PROBLEM SOLUTION

Shade will not raise or lower. Recharge motor.

Shade runs slowly. Recharge motor.

The shade only goes in one direction

(up or down).

The limit setting was unsuccessful and

needs to be reset.

Channel Display screen on remote does

not light up.

Replace the battery in the remote

(CR2430).

The indicator light on the remote does

not shine or the remote range becomes

shorter.

Replace the battery in the remote

(CR2430).

Shade goes up when down button is

pushed and down when up button is

pushed.

Press the LIMIT button on the underside

of the remote or the SETTING button on

the wand and the STOP button at the

same time. Hold until the shade jogs

once or beeps. The shade should now

move in the correct direction.

The motor beeps when operated.

The battery power is low. Recharge the

motor.

Nothing I do seems to work for the

Motivia remote shade.

Unlink the remote from the shade. Then

relink the remote and reset upper and

lower limits.

For more trouble shooting help, call us at 800.248.8888

or visit us online at smithandnoble.com to connect with a live chat assistant,

6am - 6pm Monday - Friday PT, 7am - 4pm Saturday & Sunday PT

Optional / Skew Adjustments

Hold Down

Bracket

Hold Down Bracket

Optional Hold Down Brackets are

mounted with the supplied screws.

With the shade at its proper drop, place

the pin of each Hold Down into the hole

in each End Cap and make sure the pins

are level and aligned. Raise the shade,

then screw the Hold Down Bracket into

the mounting surface.

Skew Adjustment

If the shade does not raise evenly, rst

make sure the mounting brackets are

mounted level with each other.

If the shade is level and it still skews, use

the Skew Adjustment Kit included with

your shade to adjust skewing.

If these suggestions don’t work, then

please give us a call or visit our website.

Recharging the Shade

When the shade begins to operate

slower than normal it is time to charge

the battery.

Plug the 8.4v charger into the port on

the motor. Plug the charger into an

electrical outlet.

A red light on the charger indicates that

the battery is charging.

To fully charge the batteries, allow the

batteries to charge for at least 1 hour

after the light on the charger turns green.

A typical charge cycle can take between

4-6 hours.

Setting

(Red Button)

Charging Port

Insert

Charger

Warranty Service

The enjoyment of your window coverings should be everlasting, which is why

our products come with a limited lifetime warranty. The warranty applies to

the original owner, requires a proof of purchase and covers defects in material

or craftsmanship. Shades or blinds must have been properly installed. We

reserve the right to determine if your window covering warrants a repair or a

replacement. In need of warranty service? Call us at 800.248.8888 and we’ll

arrange for a repair or replacement ASAP.

SN112018

SN2056

SN_RS_M_R_2018_1

Care & Cleaning / Safety

Care & Cleaning

Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all

that is required to keep your shades looking fresh and neat.

Safety First. Style Second To None

™

Great style should never come at the cost of safety. Every Smith & Noble window treatment

conforms strictly to today’s safety standards, including permanent tie-down devices and

built-in cord stops. To protect young children and pets, there’s no better way to eliminate

risk than to use one of our cordless products.

Child Safety

Smith & Noble Solar & Roller Shades Step By Step Installation Instructions

Brand: Smith & Noble

Model: Solar & Roller Shades

Type: Step By Step Installation Instructions

Download PDF

report

Smith & Noble Solar & Roller Shades Step By Step Installation Instructions

Smith & Noble Solar & Roller Shades Step By Step Installation Instructions

Related papers

Other documents