Brother NC-2100P Datasheet

Category
Print servers
Type
Datasheet
How to install NC-2100p
1 Turn off the printer power switch.
2 Connect the NC-2100p to the parallel port located on the back of the printer.
3 Connect the Power cord from AC adapter to the NC-2100p.
4 Connect the network interface cable to NC-2100p, and then connect it to a free port on your
hub.
5 Plug the AC Adapter into an AC outlet, and then turn the printer power switch on.
1 / 1

Brother NC-2100P Datasheet

Category
Print servers
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document