Page is loading ...
Wattstopper
®
DLM Configuration App
User’s Guide
28653 Rev. 1 01/2021
DLM Conguration App
Country of Origin: Made in the USA
FEATURES AND OPERATION OVERVIEW
OVERVIEW
The Wireless Digital Lighting Management (DLM) Conguration app from Legrand is supported on
iOS
®
and Android
®
and allows users (electrical contractors, installers, or technicians) to wirelessly
scan for, pair together, and congure Wattstopper Wireless DLM devices and room networks. From
the convenience of a smart phone or tablet and using Bluetooth
®
low energy technology, the app
creates a secure environment to easily establish and manage DLM wireless rooms across a project.
Code compliant rooms are now easier to set up and more secure than ever before, giving end-users
comfort that their wireless devices and rooms are protected in a wireless environment. Replacing the
LMCT-100 infrared remote, no other hardware or tools are needed for commissioning wireless DLM
devices.
Description Specication
DLM Cong App 1.1.1 or newer
Apple iOS Compatibility iOS10 or later, recommended iOS11
Android Compatibility Android OS 4.4 or later; Recommended Android OS 7
Wireless DLM Device Firmware Version 10.22 or newer
Bluetooth® 4.2 and higher
SYSTEM REQUIREMENTS AND COMPATIBILITY
• Compatibility: iOS and Android tablets and phones (tablets are preferred)
• Establish and manage wireless DLM rooms, networks and sites
• Congure wireless DLM rooms for energy code compliance
• Enable fast setup and maintenance
• “Quick Scan” for fast DLM room pairing
• Protected bi-directional Bluetooth
®
low energy technology communication for data upload and download
• User-friendly navigation controls and context menus
• Cloud Authentication: Role-based user and site authentication
• Ongoing AES Encryption: Communication between devices is protected by AES128 symmetric key encryption
• Over the Air (OTA) Updateable Firmware: Allows the system to address future cyber security threats
• Device Validation: Trusted hardware chips prevent any outside devices from being able to connect to the lighting control network
• Zero Touch Provisioning: Preloaded digital identity and security proles on each device make the system automatically secure
• Lighting Network Isolation: Lighting control system can be independent of all other building networks
2
TABLE OF CONTENTS
GETTING STARTED
App Overview.............................................................................4
Creating An Account..................................................................5
Dashboard Overview.................................................................7
CREATING SITES and WIRELESS ROOMS
Overview..................................................................................10
Sites.........................................................................................10
Create A Site.............................................................11
Sites Dashboard Overview........................................12
Locations Overview...................................................13
Creating Areas and Rooms Within A Site.................14
Deleting Areas and Rooms Within A Site..................16
Creating A Device Network In A Room......................17
Creating Groups........................................................18
Split Rooms...............................................................19
Waking Up Devices...................................................20
Networks................................................................................21
Discovering Networks and Devices..........................21
Creating A New Network: Networks View...............23
MAC Address Searching..........................................24
Creating A New Network: Room Controller...............25
Device Naming..........................................................27
Adding Devices To A Room.......................................28
Decommissioning A Site and Clearing App Data.....29
Room Controller Settings.........................................................30
Firmware Update.......................................................32
Daylighting Calibration..............................................34
Parameter Settings...................................................37
Switch and Sensor Properties..................................42
Scenes.....................................................................................44
Scenes Overview.......................................................44
Default Scenes..........................................................45
Creating Scenes.......................................................47
Scene Categories.....................................................49
Scene Actions.............................................51
Editing Scenes...........................................54
Site Synchronization................................................................56
Site Information........................................................................57
QUICK PAIR
Quick Pair Process..................................................................59
SETTINGS and NAVIGATION
Navigation Menu......................................................................63
Navigation Icons......................................................................65
3
GETTING STARTED
4
THE DLM CONFIG APP OVERVIEW
5
5
CREATING AN ACCOUNT
1. The DLM Conguration App is accessible by download
through the Apple App Store or Google Play for Android.
Search for “DLM Conguration” by Legrand. Install and
launch the app on your smart phone or tablet. Press the
Create New Account option. (Requires Internet access)
2. Enter the data for all the elds. Press Create Account when
nished.
• Valid email address
• Valid password (must contain at least 8 characters, 1
uppercase letter, 1 number)
• Contact name(s)
• Mobile phone number
Press Create Account to complete.
Install the app and create an Account which will start the authorization process.
THE ACCOUNT PROCESS
This is also known as a Basic Account which allows for
immediate simple quick pairing. It is recommended to
obtain an authorized account.
This is also known as an Authorized Account which is a
basic account that has been approved from Legrand. With an
authorized account, the user will have enhanced access to
device parameters, scenes, and SoO.
- OR -
CONGRATULATIONS! Your account has been submitted for authorization. You can call a Wattstopper representative at
1.888.538.6070 to inquire about your authorization status. While you are awaiting authorization, your dashboard will reect your
account status as:
• Create a DLM wireless room network
• Congure Room Controller and add to the room network
• Congure devices
• Quick pair via an easy to use interface
• Establish site(s)
• Set up areas and rooms through a tree structure
• Assign devices to areas and rooms
• Set device parameters for Room Controllers, wall switches,
and sensors
• Create, manage and assign scenes
• All site information is secured and uploaded to the cloud
UNAUTHORIZED ACCOUNT CAPABILITIES AUTHORIZED ACCOUNT CAPABILITIES
6
The DLM Cong App has been created to provide a simple and intuitive user experience. At any level within the app, Help is just a
tap away providing context-specic guides of denitions, options, and instruction to help you navigate through available actions.
HELP OVERVIEW
1. Tap the question mark icon in the top right corner for
context-specic help on every level throughout the app.
2. Upon entry, users are presented with pop-ups. Swipe side
to side to learn more about context specic information at the
current level. To exit, tap Get Started, Dismiss, or Got It at the
bottom depending on which level you are on.
7
DASHBOARD OVERVIEW
The Dashboard provides quick access to buttons status information, historical view, and a calendar view of schedules.
MENU
Tap the “menu” button (three lines) to access the pop-up
menu containing account information, language, themes
and colors, and “About” details - see next page for details
QUICK PAIR
Quick pair allows for easy
set up and pairing of
equipment within the room
to the network
HELP
Tap to access context specic
help on every level of the app
SITES
Select to view, create, and modify multiple
wireless DLM sites - Veried account feature
BLUETOOTH
®
LOW ENERGY
TECHNOLOGY
CONNECTIONS
View active Bluetooth low energy
technology connections
RECENT SITES
After sites have been established
and used, they will appear in this
area for quick access. Each site tile
will contain identifying information
associated with the site that has
been entered into the site eld
INFORMATION
Displays the user’s status showing
if account info is complete and if
it is a veried account. Veried (or
authorized) accounts have access to
customized functionality
NOTE: Although the same functionality exists between
tablets and phones, the following screen layouts may differ
depending on the device used. It is recommended to use
tablets for optimal viewing. (Tablet screenshots shown
throughout user guide)
8
DASHBOARD POP-OUT OVERVIEW
DASHBOARD
Return to the main dashboard
CONFIGURATION
Menu options
SETTINGS
Menu options
SITE
Link to current site’s location dashboard
NOTIFICATION CENTER
Displays notications from the app
ALL SITES
Link to all sites
ACCOUNT
View account info
LANGUAGE
Select default language
THEMES
Set theme and font size for optimal viewing
ABOUT
View app info, set notications
QUICK PAIR
Link to networks for quick pairing
Accessed by the three lines on the main dashboard, the Pop-out menu contains quick access to sites, account information and provides ability to
change language, themes and colors.
9
CREATING SITES and
WIRELESS ROOMS
10
The optimal and recommended way to set up your wireless system is through sites. Sites allows for viewing of all available sites and
the creation of new sites. Site details can also be viewed and edited. Recently visited sites are accessible directly from the home
dashboard. By setting the structure for each site through areas and rooms, you can connect devices directly to those rooms for
organization, edit device parameters and sequence of operations. This diagram shows the steps you will take to establish wireless
DLM room networks through the sites option.
SITES AND WIRELESS ROOM OVERVIEW
SITES
Establish a site with a name and
location. Add contact information and
code compliance for a complete site
prole.
Repeat for multiple sites.
Within the dashboard, tap the sites
icon to view and edit the site structure
through areas and rooms.
SET UP AREAS AND ROOMS
Structure the site by establishing areas
and rooms in a tree structure. This
allows for zone control of devices and
scenes.
Obtain more detailed information like
light load average and room status
through the room view. Toggle between
device and room view by tapping the
desired icon.
ASSIGN DEVICES
Assign devices to established areas
and create rooms. View awake status
and connectivity strength through
device tiles.
ENTER ROOM AND CREATE
NEW NETWORK
Create a secured room network by
pairing devices to a room controller.
Changes are automatically updated to the
Legrand secure cloud.
SET PARAMETERS and
SEQUENCE of OPERATIONS
(SoO)
Set parameters of the devices through the
room controller. Some parameter options
include:
• Trim Levels
• Occupancy Delays
1 2
43
SITE
AREA
ROOM
11
CREATE A SITE
1. From the home dashboard, all recent sites will be visible at the
bottom. If you have not yet created sites, Recent Sites will be
blank. To collapse the view of recent sites, tap the arrow. To add
a site, tap the Sites tile to continue.
3. Fill in the elds for the new site. The name, city, and state
are required to create a site. The other information is helpful to
create a complete prole but is not required.
Note: Once a site is created, it cannot be deleted, only edited
through the app. The site owner can call the service center to
have a site removed from the account. 1.888.538.6070
2. After entering Sites, tap an established site tile for further
editing. Or to add a new site, tap Create Site from the “+” round
blue button in the right hand, lower corner.
4. Identify the site with a Code Compliance option for reference.
Choose from Title 24 (2016), Ashrae 90.1 (2013), IECC (2015) or
none. Tap Create when nished to complete the site set up. Use
parameters and scenes to create a code compliant site.
Repeat this process for each site creation. The most recent sites
will now be located under the main dashboard for convenience.
Tap on the site tile from the sites level to access the sites
dashboard.
12
SITES DASHBOARD OVERVIEW
Once a site is selected, the Site Dashboard allows you to view the Site Structure, Network, Scenes, and more information about
the selected site. To navigate through the Site Dashboard, use the navigation bar at the bottom of the page to access the other
options.
SITE STRUCTURE
Edit the areas and rooms within the site
and view additional information about a
specic site
CLOUD SYNCHRONIZATION
Notications are displayed when new actions that
require cloud synchronization are made. View each
item’s cloud upload status. Items that have been
uploaded to the cloud can be removed from the list.
ROOM NETWORK VIEW
View a list of all established room networks.
Also provides an easy view of device count
assigned to the wireless room network.
SCENES
Create, manage and edit scenes within sites whether through the default scenes or customized ones you create.
Add multiple actions to scenes and assign to desired devices. Organize scenes into custom categories.
SITE INFORMATION
View established account information of
address, contacts, codes, and details. Edit
by tapping the pencil icon.
AREAS
Manage areas and
rooms within the
building. Edit names,
add areas and
remove areas
SITE ROOT
Site top level (root) where areas and
rooms are displayed in tree structure
13
View additional information about a specic location such as devices, loads, and scenes by tapping the room name which accesses
the room view. Toggle between the room and device view by tapping the desired icon at the top right.
ROOM VIEW DEVICE VIEW
DEVICE AND ROOM VIEWS
Structuring the site through areas and rooms is the optimal organization method for devices. By preparing your site under this format,
you can efficiently assign devices and control lighting parameters. This overview will help you understand the tree structure of areas in
the DLM Config app.
Under the root building, add areas according to desired site set up. You can add more areas under the original area. Once you have
added hardware to an area, it becomes a room and no more areas can be added under it. An area has the ability to become a split
room where you can divide the area into sub-rooms with individualized control. The original room now becomes an area again
once it hosts sub rooms. Groups set up within a DLM Room are meant to identify devices that should follow an identical rule set
and functional behavior. Grouping devices also streamlines startup as it allows users to set group-level parameters, thus reducing
individual device touch time. NOTE: You cannot add areas below a sub room. However, you can nest an area for multiple layers.
ROOT BUILDING
SUB-ROOM
Created from the Split Room option,
these rooms can divide a bigger area
into smaller zones or rooms. A room
that is split turns back into an area
ROOM
An area that has added hardware.
Once sub-rooms are added, it
becomes an area again
GROUP
Created in the Create Groups option,
devices with common sequences of
operation can be identied
AREA
SITE
LOCATIONS OVERVIEW
Device ViewRoom View
SPLIT ROOM
This option appears when a device
has been added to an area and a
room has been formed. Create sub-
rooms within an area for tighter control
14
CREATING AREAS AND ROOMS WITHIN A SITE
1. Begin by establishing the name of your root building by
tapping the three dots and select Edit Name.
3. Under the root building level, tap the three dots and select
Add Area +.
2. Type the desired name and press the check mark to conrm.
4. Name the new area and press OK to conrm. Repeat adding
desired areas under the root building.
15
CREATING AREAS AND ROOMS WITHIN A SITE (continued)
5. You can also add an area under an area. Tap the ellipses
under the desired area and tap Add Area. You can add multiple
areas under an area.
7. To create Rooms, select the three ellipses to the right of the
building or any area and select Add Room.
6. Name the area and press OK to conrm.
8. Name the room and press OK to conrm.
16
1. To delete an area or room, tap the three dots on the area
you wish to delete and select delete.
2. Tap OK to conrm area deletion.
DELETING AREAS AND ROOMS WITHIN A SITE
17
3. Select the device(s) you want to add to the network by
tapping the white box of the device tile. When chosen, the box is
checked in green. Once all the devices have been added, select
the green circle check-mark to add the devices to the network.
This can take a couple of minutes.
1. Select a room you wish to add devices to, locate the Add
Network button at the bottom right and select Create New
Network.
4. A status screen will show the initiating process and show
pairing devices. After devices have been paired, the network will
reboot and verify that all devices have been paired.
CREATING A DEVICE NETWORK IN A ROOM
2. Select the room controller which will support the network.
18
CREATING GROUPS
1. From the Room View, tap the three ellipses to create your
Groups and name them. Tap Assign Devices in the bottom
right corner. Add Network button at the bottom right and select
Create New Network.
2. For each Group, tap the devices that should be added to that
group and tap the Next bottom right button.
4. Wait for the App to group devices and verify proper load
control within the groups.
3. Once all groups have been assigned their devices, tap the
green check button to start grouping.
19
SPLIT ROOMS
Once an area has added devices, you are able to split the area up into rooms. This provides focused management over a smaller
area or zone. These new rooms are indicated by the room symbol . See page 17 on how to wake devices before adding them to a
room. See page 22 on how to add devices to a room. This needs to be done before splitting an area into rooms.
NOTE: The room that was split becomes an area once again in the organizational tree.
1. Tap the three dots at the area level you want to split and
select Split Room .
2. Name the room by tapping New Room 1 and editing the name.
3. Add another sub room by tapping the symbol underneath
the rst room. Edit the name and continue adding sub rooms as
necessary. To delete a room, tap the symbol to the right of the
room.
20
1. Room Controller
Wake up room controllers by pushing the cong button once as
indicated.
NOTE: The BLE connection to a room controller remains on
while it is on the default network. It will turn off after being paired
to a room.
4. Factory Default
To reset the controller or any device to factory default, press the
conguration button quickly 10xs.
CONFIG
BUTTON
CONFIG
BUTTON
WAKING UP DEVICES
3. Sensors
Wake up sensors by pushing the cong button once, as
indicated.
2. Wireless Dimming Wall Switch
Remove switch plate and with a pen point or small screwdriver,
push the conguration button one time to awake.
In preparation to adding devices and establishing a network, battery operated devices must be awake. It will be necessary to wake up
the devices that use batteries if they are asleep. To wake up devices by pushing the cong button once. This powers up the device
for ve minutes and gives you enough time to pair the device through the app. Follow these instructions on how to wake up sensors,
wall switches, and the BLE radio for controllers. NOTE: Wake up all devices within arms reach before installation and if needed, other
installed devices via ladder.
/
