2266-AG

Crystorama 2266-AG User manual

  • Hello! I've reviewed the assembly instructions for the Crystorama 2266-AG light fixture. This document outlines the steps for installing the fixture, including wiring and attaching the shade and glass diffuser. It uses 5 medium base bulbs and has an adjustable chain. I'm ready to answer any questions you have about assembling this light fixture.
  • What type of light bulbs are required?
    Is this fixture suitable for wet locations?
    Does the package include light bulbs?
ASSEMBLYINSTRUCTIONMODEL#2266-AG
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Youwillneed5-MediumBaseBulb
60WattsRecommended100WattsMax.
USELEDBULBSFOREXTENDEDUSE
ThisfixtureisDryrated
Crystorama.com
Howtoinstall
3.Connectfixturewirestosupplywiresinoutletbox.
6.Threadthenippleontothecouplingandadjust
thelengthofnippletofitwiththeglass.Tighten
itwithhexnut.
7.Slidetheglassdiffuser,theplasticwasherandthe
metalwasheroverthenipple,thensecurewiththe
hexnut.
8.Slidethecapoverthenipple,thensecurewiththe
bottomfinial.
23-7/8
GLASSDIFFUSER
23-1/2
FABRICSHADE
14-1/8
5.Installthebulbs(notincluded)intothesocket.
1.Sliptheloopalongwireandthreadontothe
nipplelocatedonthetopofthemetalframe.
2.Determinethepreferredhangingheightand
adjustthechaintothelengthrequired.
4.Installthefixtureontotheoutletbox.
CHAIN
LOOP
NIPPLE
METALFRAME
FABRICSHADE
COUPLING
HEXNUT
NIPPLE
GLASS
DIFFUSER
PLASTICWASHER
METALWASHER
HEXNUT
CAP
BOTTOMFINIAL
6
3/4
24-1/4
17-3/4
91-3/4
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
ASSEMBLYINSTRUCTIONMODEL#2266-AG
Crystorama.com
PartNumber
PartNumbers
A.(1)-Mountinghardware
B.(1)-CanopyW6xH3/4’ #XRF2260AGCAN6IN
H.(1)-FabricshadeW23-1/2xH14-1/8’ #XRF2266SHA23.5IN
I.(2)-Hexnut
N.(1)-Cap#XRF2263AGCAP
K.(1)-Glassdiffuser#XRF2266DIF23.875IN
J.(1)-Nipple
L.(1)-Plasticwasher
G.(1)-Metalframe
M.(1)-Metalwasher
O.(1)-Bottomfinial#XRF2263AGFIN
A
B
C
D
E
F
G
H
I
J
K
I
L
M
NO
C.(1)-Collarring
D.(1)-Collarloop#XRF2260AGLOOP
E.(1)-Chain-72’,4mmthick#XRF2260AGCHA4.0MM
F.(1)-Loop
/