2. Crystorama
  3. 2263-AG
2263-AG

Crystorama 2263-AG User manual

  • Hello! I've reviewed the Assembly Instruction for the Crystorama 2263-AG light fixture. This document provides detailed steps for assembling and installing the fixture, including wiring, bulb installation, and attaching the diffuser and finial. I'm ready to answer any questions you have about the assembly process or the features of this light fixture.
  • What type of bulbs should be used?
    Where can this product be installed?
    Does the package include a bulb?
ASSEMBLYINSTRUCTIONMODEL#2263-AG
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Youwillneed3-MediumBaseBulb
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
OUTLETBOXSCREW
MOUNTINGSCREW
MOUNTINGBAR
PLASTICWASHER
KEYSLOT
CEILINGPAN
ThisfixtureisDryrated
Crystorama.com
FABRICSHADE
METALFRAME
COUPLING
SOCKET
HEXNUT
NIPPLE
GLASSDIFFUSER
METALWASHER
HEXNUT
CAP
BOTTOMFINIAL
15-3/4’’
16-1/8’’
8-3/4’’
12-1/4’’
GLASSDIFFUSER
HOWTOREPLACEBULB:
REMOVEBOTTOMFINIALANDDIFFUSERTO
REPLACE PREVIOUSBULBW/NEWBULB.
4.Installthebulb(notincluded)intothesocket.
Howtoinstall
1.Threadthemountingscrewsintothematching
holesinthemountingbar.Securethemounting
bartooutletboxwiththeoutletboxscrews.
2.Connectfixturewirestosupplywiresinoutletbox.
3.Raisetheceilingpanallowingforthemounting
screwstoprotrudethroughkeyslotsontheceiling
pan.Rotatetheceilingpanclockwiseuntilthe
mountingscrewsareinthenarrowpartsofthekey
slotthentightenthescrewswithascrewdriver.
5.Threadthenippleontothecouplingandadjust
thelengthofnippletofitwiththeglass.Tighten
itwithhexnut.
6.Slidetheglassdiffuser,theplasticwasherandthe
metalwasheroverthenipple,thensecurewiththe
hexnut.
7.Slidethecapoverthenipple,thensecurewiththe
bottomfinial.
15-3/8’’
FABRICSHADE
7-1/4’’
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
ASSEMBLYINSTRUCTIONMODEL#2263-AG
A
D
E
F
G
H
B
C
Crystorama.com
PartNumber
PartNumbers
A.(1)-Mountinghardware
B.(1)-Ceilingpan
D.(1)-FabricshadeW15-3/8’’xH7-1/4’’ #XRF2263SHA15.375IN
E.(2)-Hexnut
J.(1)-Cap#XRF2263AGCAP
G.(1)-Glassdiffuser#XRF2263DIF15.75IN
F.(1)-Nipple
H.(1)-Plasticwasher
I
E
J
K
C.(1)-Metalframe
I.(1)-Metalwasher
K.(1)-Bottomfinial#XRF2263AGFIN
/