2. Quoizel
  3. TUT638WS

Quoizel TUT638WS User manual

  • Hello! I've reviewed the installation guide for the Quoizel TUT638WS and TUT638MBK light fixtures. This document provides step-by-step instructions on assembling and mounting the fixture, including important safety precautions and details about the included components. I'm ready to answer any specific questions you have about the installation process or the features of these light fixtures.
  • What should I do before starting the installation?
    What type of bulbs should I use?
    What should I do if I am unsure about the electrical installation?
    How do I clean the fixture?
1 of 3
Ceiling Canopy
x1
A
Crossbar Assembly
x1
AA Wire Connector
x3
BB Outlet Box Screw
x2
CC
PACKAGE CONTENTS
MOUNTING HARDWARE
Released Date: 2023 04 07--
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
CARE AND MAINTENANCE
SAFETY INFORMATION
12"L Rod
x4
6"L Rod
x4
B
C
INSTALLATION GUIDE FOR TUT638WS
AND TUT638MBK
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
DFixture Body
x1
Glass Shade
x6
E
2 of 3
3
Install Swivels and Ceiling Canopy to Upper
Rods
For angled ceilings,
Swivels opening towards wall.
90Degree
Swivel
* Make sure two swivels
opening are in the same
direction while assembling.
4
Install Crossbar Assembly
Outlet Box
Install Lanyards
5
Lanyard
Lanyard
Button Stop
INSTALLATION
2
Separate Swivels from Ceiling Canopy
Optional Rods:
8 Feet Ceiling:
( ) 12"L Rod .2s
9 Feet Ceiling:
( ) 6"L Rods + (2) 12"L Rods.2
1
Install Rods
6
Wiring
White wire from supply White from fixture
Black (or red) wire from supply Black from fixture
Ground wire from supply
Ground wire
from fixture
Green ground screw
3 of 3
INSTALLATION
8
Install Ceiling Canopy
Your installation is now complete! Restore electricity and save this sheet for future reference.
9
Install Glass Shades and Bulbs
Install correct bulbs referring to fixture markings and/orsix
labels for maximum wattage.
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
Recommended Bulb Type
(not included):
/