-of -13
PACKAGE CONTENTS
MOUNTING HARDWARE
Ceiling Canopy
x 1
12"L Rod
x2
6"L Rod
x4
A
C
B
Released Date: 2023-02-03
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
CARE AND MAINTENANCE
SAFETY INFORMATION
INSTALLATION GUIDE FOR HDR842MBK
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
Crossbar Assembly
x1
AA Wire Connector
x3
BB Outlet Box Screw
x2
CC Quick Link
x2
DD
FFixture Body
x 1
C
12"L Rod With Nipple
x2
D
12 Nipple"L Rod No
x2
CE
-of -23
1
INSTALLATION
Install 12"L Rod With Nipple
2
Install Rods and Quick Link
Optional Rods:
8 Feet Ceiling:
(1) 6"L Rods + (2) 12"L
Rods each side.
9 Feet Ceiling:
(2) 6"L Rods + (2) 12"L
Rods each side.
3
Separate Swivels from Ceiling Canopy
4
Install Swivels and Ceiling Canopy to Upper
Rods
For angled ceilings,
Swivels opening towards wall.
Swivel
* Make sure two swivels
opening are in the same
direction while assembling.
5
Install Crossbar Assembly
90Degree
Install Lanyards
6
Lanyard
Lanyard
Button Stop
-of -33
INSTALLATION
7
Wiring
White wire from supply Ribbed side of wire from fixture
identified with the label “N”
Black (or red) wire from supply Smooth side of wire from fixture
identified with the label “L”
Ground wire from supply Ground wire from fixture
identified with the label “G”
Green ground wire
8
Install Ceiling Canopy
9
Install Bulbs
Your installation is now complete! Restore electricity and save this sheet for future reference.
Install correct bulbs referring to fixture markings and/or labelsnine
for maximum wattage.
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
Recommended Bulb Type
(not included):
/
