2. ASHLEY HARBOUR COLLECTION
  3. ASH32531A

ASHLEY HARBOUR COLLECTION ASH32531A Operating instructions

  • Hello! I'm a chat assistant that has reviewed the ASH32531A Installation Guide. I'm here to help you install your light fixture, I understand that this document contains safety information, lists necessary tools, details package contents, and describes the installation steps, as well as care and maintenance of the fixture. Feel free to ask me any questions you might have about the device or the installation process.
  • What should I do before starting installation?
    What type of bulbs should I use?
    What should I do if I have doubts about the electrical installation?
--1
Ceiling Canopy
x 1
A
Fixture Body
x1
Crossbar Assembly
x 1
AA Wire Connector
x3
BB Outlet Box Screw
x2
Quick Link
x2
CC DD
PACKAGE CONTENTS
MOUNTING HARDWARE
INSTALLATION GUIDE FOR ASH32531A
Released Date: 2021-03-18
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the
finish.
If you need further assistance email customercare@ashleyharbour.com.
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
CARE AND MAINTENANCE
SAFETY INFORMATION
12"L Rod
x4
6"L Rod
x4
Small Loop
x 2
B
C
D E
--2
1
Rotate nsSteel Wires to Proper Locatio
2
Install Rods
34
Install Small Loops and
Ceiling Canopy
Install Crossbar Assembly
7
Install Ceiling Canopy
6
Wiring
White wire from supply Ribbed side of wire from fixture
identified with the label “N”
Black (or red) wire from supply Smooth side of wire from fixture
identified with the label “L”
Ground wire from supply Ground wire from fixture
identified with the label “G”
Green ground wire
INSTALLATION
G
N
L
Install Lanyards
G
N
L
5
Optional Rods:
8 Feet Ceiling:
( ) 6"L Rod + (1) 12"L Rod each side.1
9 Feet Ceiling:
( ) 6"L Rod + (2) 12"L Rods each side.1
10 Feet Ceiling:
(2) 6"L Rods + (2) 12"L Rods each side.
Lanyard
Lanyard
Button Stop
Steel Wire
--3
Your installation is now complete! Restore electricity and save this sheet for future reference.
Install ive correct bulbs referring to fixture markingsf
and/or labels for maximum wattage.
Recommended Bulb Type (not included):
8
Install Bulbs
INSTALLATION
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
/