Razor W15155049003 Operating instructions

Brand: Razor

Model: W15155049003

Type: Operating instructions

Razor W15155049003 is a battery-operated electric scooter designed for personal transportation. It features a powerful motor, a long-lasting battery, and a sleek, lightweight design. With a top speed of 15 mph and a range of up to 10 miles on a single charge, the Razor W15155049003 is perfect for commuting, running errands, or just cruising around town. The scooter also features a sturdy aluminum frame, front and rear suspension for a smooth ride, and a rear-wheel drive for added stability.

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Paciﬁc Time.

WARNING

Step 1 Step 2

Required Tools: (Not included)

A. Phillips screwdriver

B. 4 mm Allen wrench

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect

charger before conducting any assembly or maintenance procedures. Failure to follow these

steps in the correct order may cause irreparable damage.

Using a Phillips screwdriver, remove nine (9) screws from

the bottom of the deck.

Using a 4 mm Allen wrench, remove two (2) hex screws.

One on each side of the deck.

POWER A2

BATTERY REPLACEMENT PROCEDURES

PART # W15155049003

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Paciﬁc Time.

Step 3 Step 4

Remove the plastic cover from the unit. Locate and

disconnect the throttle wire from the controller.

Using a 4 mm Allen wrench, remove two (2) hex screws

and pull the bracket out of the frame.

Remove the grommet from the metal bracket. Push the

throttle wire inside the opening.

Remove the controller cover to access the wires.

Remove the grommet at the back of the tray.

Step 5 Step 6

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Paciﬁc Time.

Step 7 Step 8

Disconnect the three (3) wires from the back of the unit.

Place battery on tray with label facing down and connect

to controller.

Push down on the power switch and slide the battery

tray out of the deck.

Line up the wires and slide battery tray back inside the

frame. Reposition the grommet at the back of the tray.

Step 9 Step 10

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Paciﬁc Time.

Reconnect all connectors.

NOTE: There is one connector that is empty.

Reconnect throttle to controller and place the grommet

back into the bracket.

Place bracket back on the unit and pull the throttle wire

through the opening on the bracket.

Secure the bracket to frame. Place the plastic cover back

onto the unit.

Step 11

Step 13

Step 12

Step 14

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Paciﬁc Time.

Reposition controller cover and secure with screws. Reverse the steps.

ATTENTION: Charge battery 10 hours before using.

Step 15 Step 16

Razor W15155049003 Operating instructions

Razor W15155049003 Operating instructions

Razor W15155049003 Operating instructions

Related papers

Other documents