2. evolur
  3. 877

evolur 877 Operating instructions

  • Hello! I've reviewed the assembly instructions for the Trundle model 877-01. This document outlines the steps, tools, and safety precautions necessary for assembling your new trundle. I'm ready to assist you with any questions you might have regarding the process or the included parts.
  • What tools are needed for the assembly?
    What should I do to protect the parts during assembly?
    How should I clean the surface?
TRUNDLE
AI - 877-01
ASSEMBLY INSTRUCTIONS
Model shown is example only. Styles may vary
1
AI-877-01
Adult assembly required.
Small parts may present choking hazard prior to assembly.
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
AI-877-01 4
(NOT PROVIDED)
(NON FOURNI)
E x 16 (1”) F x 1
G x 1 D x 8
A x 8 (1”)
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
HARDWARE AND TOOL DIAGRAM
5
1
3
3
2
4
44
4
x 6
D D
x 8
AI-877-01 5
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
A x 8 (1”) G
1
3
3
2
D x 8
D D
x 8
E x 16 (1”)
AI-877-01 6
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
4
4
4
4
AI-877-01 7
ASSEMBLY I NSTRUCTION S -Instructions pour l'assembla g e
F
5x 6
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
Follow us on
to get your nursery featured on our social media.
@EvolurBaby @evolurbaby
/