evolur 814-01 User manual

814-01
evolur
Brand
evolur
Model
814-01
Type
User manual

The evolur 814-01 is a toddler guard rail designed to provide a safe and secure sleeping environment for your child during their toddler years. Constructed with durable materials, it easily attaches to your child's crib, preventing them from accidentally rolling out of bed while they sleep. The evolur 814-01 is compatible with Evolu 814 series cribs and requires adult assembly. It includes all necessary hardware for a straightforward installation process. Ensure a proper fit by following the detailed instructions provided.

The evolur 814-01 is a toddler guard rail designed to provide a safe and secure sleeping environment for your child during their toddler years. Constructed with durable materials, it easily attaches to your child's crib, preventing them from accidentally rolling out of bed while they sleep. The evolur 814-01 is compatible with Evolu 814 series cribs and requires adult assembly. It includes all necessary hardware for a straightforward installation process. Ensure a proper fit by following the detailed instructions provided.

TODDLER GUARD RAIL
(Barriere de lit pour enfant)
BULETTIN NO . AI - 814-01
ASSEMBLY INSTRUCTIONS
Model shown is example only. Styles may vary
AI- 814-01
Adult assembly required.
Small parts may present choking hazard prior to assembly.
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSEMBLY INSTRUCTIONS-Instructions p our l'asse m b l a g e
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
AI- 814-01
ASSEMBLY INSTRUCTIONS-Instructions p our l'asse m b l a g e
HARDWARE AND TOOL DIAGRAM
x 2 (2-3/8”)
B
x 1 (1-3/4”)
A
BULLETIN # AI- 814-01 4
ASSEMBLY INSTRUCTIONS-Instructions p our l'asse m b l a g e
BULLETIN # AI- 814-01 5
ASSEMBLY INSTRUCTIONS-Instructions p our l'asse m b l a g e
x 2
H
HARWARE INCLUDED IN CRIB (BOULONS CONTENUS DANS LE LIT)
x 2 (2-3/8”)
B
x 2 (2”)
G
x 1 (1-3/4”)
A
G
A
B
HHG
BULLETIN # AI- 814-01 4
ASSEMBLY INSTRUCTIONS-Instructions p our l'asse m b l a g e
BULLETIN # AI- 814-01 5
ASSEMBLY INSTRUCTIONS-Instructions p our l'asse m b l a g e
HARWARE INCLUDED IN CRIB (BOULONS CONTENUS DANS LE LIT)
x 2 (2-3/8”)
B
x 1 (1-3/4”)
A
2 x (2-1/4”) x 2
E
E
F
F
A
B
BULLETIN # AI- 814-01
Toddler Bed Conversion
WARNING
WHEN CONVERTING THIS CRIB TO A TODDLER BED,
A GUARD RAIL AND STABILIZER BAR MANUFACTURED BY ÉVOLUR INC.,
MUST BE USED.
In order to convert your crib to a toddler bed,
you must first remove the front rail of the crib,
then attach the guard rail using the bolts
from the front rail removal.
NOTE: Make sure the mattress support is in the lowest
position.
Please follow the complete instructions that
come with the guard rail which is sold separately.
8
LA BARRIERE DE LIT ET LA BARRE DE STABILISATION FABRIQUEES PAR EVOLUR DOIT
ETRE UTILIZE.
BULLETIN NO. WTB-00
FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT OR STRANGULATION.
DO NOT PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES
MAY STRANGLE A CHILD.
THE MATTRESS INTENDED FOR USE ON THIS BED SHALL BE A FULL-SIZE CRIB
MATTRESS HAVING THE DIMENSIONS OF 51-5/8 IN (1310 MM) IN LENGTH AND
27-1/4 IN (690 MM) IN WIDTH AND THICKNESS OF 4 IN (100 MM) OR A GREATER
THICKNESS AS SPECIFIED BY THE MANUFACTURER.
THE MINIMUM AGE OF THE INTENDED USER SHALL NOT BE LESS THAN 15 MONTHS
AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50 LBS. (22.7 KG).
WARNING!
For Toddler Bed Use
BULLETIN # AI- 814-01
Day Bed Conversion
9
ASSEMBLY INSTRUCTIONS-Instructions pour l'ass e m b l a g e
WARNING
WHEN CONVERTING THIS CRIB TO A DAY BED,
STABILIZER BAR MANUFACTURED BY ÉVOLUR INC., MUST BE USED.
SEE CRIB ASSEMLBLY INSTRUCTIONS
In order to convert your crib to a day bed,
you must first remove the front rail of the crib,
then attach the stabilizer bar, using the bolts
from the front rail removal.
NOTE: Make sure the mattress support is in the lowest
position.
Please follow the complete instructions that
come with the guard rail which is sold separately.
LORS DE LA CONVERSION CE LIT DE JOUR LIT , UN STABILISANT FABRIQUES PAR
RÊVE SUR MOI INC . , DOIVENT ÊTRE UTILISÉS.
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
Follow us on
to get your nursery featured on our social media.
@EvolurBaby @evolurbaby
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

evolur 814-01 User manual

814-01
evolur
Brand
evolur
Model
814-01
Type
User manual

The evolur 814-01 is a toddler guard rail designed to provide a safe and secure sleeping environment for your child during their toddler years. Constructed with durable materials, it easily attaches to your child's crib, preventing them from accidentally rolling out of bed while they sleep. The evolur 814-01 is compatible with Evolu 814 series cribs and requires adult assembly. It includes all necessary hardware for a straightforward installation process. Ensure a proper fit by following the detailed instructions provided.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents