2. evolur
  3. AI920
AI920

evolur AI920 User manual

  • Hello! I am your assistant, and I have reviewed the assembly instructions for the ÉVOLUR Changing Tray AI-920-00. This document provides essential information on how to assemble the changing tray safely. It also includes warnings, hardware list plus necessary steps to secure it for use, which uses changing pad 34 inches x 16 inches, sold separately. I am ready to answer any questions you may have about the product and instructions.
  • What is the maximum weight limit for the changing tray?
    Is the changing pad included with the changing tray?
    What should I do if there are any loose joints, missing or broken parts?
EMPIRE CHANGING TRAY
AI - 920-00
ASSEMBLY INSTRUCTIONS
Model shown is example only. Styles may vary
1
CHANGING PAD
34 INCHES X 16 INCHES,
SOLD SEPARATELY
AI-920-00
Adult assembly required.
Small parts may present choking hazard prior to assembly.
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSEMBLY INSTRUCTIONS-Instructions p our l'asse m b l a g e
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
AI-920-00 6
(NOT PROVIDED)
(NON FOURNI)
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' asse m b l a g e
HARDWARE AND TOOL DIAGRAM
x 5 (1- 1/4’’)
A
AI-920-00 7
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' asse m b l a g e
x 5 (1 - 1/4’’)
A
CTSIG-00
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854, TEL : (732) 752-7220
!WARNINGS
* READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TRAY OR CHANGING PAD
* KEEP ALL INSTRUCTIONS FOR FUTURE USE
* DO NOT USE THIS CHANING TRAY IF THERE ARE ANY LOOSE JOINTS,
MISSING OR BROKEN PARTS AND / OR SHARP EDGES . CONTACT
DREAM ON ME INC., 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE. DO NOT
SUBSTITUTE PARTS OF ANY KIND
* WHEN CHILD REACHES A MAXIMUM WEIGHT OF 30 LBS, THE CHANGING TRAY
SHALL NO LONGER BE USED
FALL HAZARD - CHILDREN HAVE SUFFERED SERIOUS INJURIES AFTER
FALLING FROM CHANGING TABLE. FALLS CAN HAPPEN QUICKLY.
STAY WITHIN ARM’S REACH.
ALWAYS SECURE THIS UNIT TO THE CHANGING SURFACE OF DRESSER #912
OR #907 OR #901...BY DREAM ON ME INC.,(SOLD SEPARATELY) OR A SURFACE
THAT IS LEVEL, STABLE AND STRUCTURALLY SOUND WITH A MINIMUM
SURFACE DIMENSION OF 20” X 58” BY USING THE HARDWARE PROVIDED.
SEE INSTRUCTIONS
34 INCHES X 16 INCHES AND NOT EXCEEDING 1 INCH IN THICKNESS.
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
Follow us on
to get your nursery featured on our social media.
@EvolurBaby @evolurbaby
/