evolur 851 User manual

851
evolur
Brand
evolur
Model
851
Type
User manual

Evolur 851 is a changing tray designed to provide a safe and convenient surface for changing your baby's diapers. It is compatible with Evolur dressers #816, #838, or #843, and it requires a changing pad sized 32.50” X 17” X 1”. The tray is easy to assemble and can be secured to the changing surface of the dresser. It is important to ensure that the dresser is level, stable, and structurally sound with minimum surface dimensions of 20” X 58”. For safety, always keep your child within arm's reach and discontinue using the changing tray once your child reaches a maximum weight of 30 lbs.

Evolur 851 is a changing tray designed to provide a safe and convenient surface for changing your baby's diapers. It is compatible with Evolur dressers #816, #838, or #843, and it requires a changing pad sized 32.50” X 17” X 1”. The tray is easy to assemble and can be secured to the changing surface of the dresser. It is important to ensure that the dresser is level, stable, and structurally sound with minimum surface dimensions of 20” X 58”. For safety, always keep your child within arm's reach and discontinue using the changing tray once your child reaches a maximum weight of 30 lbs.

CHANING PAD SOLD SEPARATELY
CHANGING TRAY
AI - 851-01
ASSEMBLY INSTRUCTIONS
Model shown is example only. Styles may vary
1
AI-851-01
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please nd simple step-by-step instructions to help you quick assemble your product. Before you begin, we recommend
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSEMBLY INSTRUCTIONS-Instructions pour l'assemblage
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
AI-851-01 6
(NOT PROVIDED)
(NON FOURNI)
ASSEMBLY INSTRUCTIONS-Instructions pour l'assemblage
HARDWARE AND TOOL DIAGRAM
x 4 (5/8 x 2
”)
B
A
x 2 ( 3/4”)
C
AI-851-01 7
ASSEMBLY INSTRUCTIONS-Instructions pour l'assemblage
STEP ÉTAPE 2
x 2 ( 3/4”)
C
x 4 (5/8 x 2
”)
B
A
A
AI-851-01
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
!WARNING
* READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TRAY OR CHANGING PAD
* KEEP ALL INSTRUCTIONS FOR FUTURE USE
* WARNING: FALL HAZARD - TO PREVENT DEATH OR SERIOUS INJURY,
ALWAYS KEEP CHILD WITHIN ARM’S REACH
* DO NOT USE THIS CHANING TRAY IF THERE ARE ANY LOOSE JOINTS,
MISSING OR BROKEN PARTS AND / OR SHARP EDGES . CONTACT
DREAM ON ME INC., 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE. DO NOT
SUBSTITUTE PARTS OF ANY KIND
* WHEN CHILD REACHES A MAXIMUM WEIGHT OF 30 LBS, THE CHANGING TRAY
SHALL NO LONGER BE USED
* CHANGING PAD SIZED 32.50” X 17” X 1” FOR THIS PRODUCT
* USE A DRRESSER, SOLD SEPARATELY, FOR CHANGING TABLE TO ATTACH
THE CHANGING TRAY
* ALWAYS SECURE THIS UNIT TO THE CHANGING SURFACE OF DRESSER #816 OR #838
OR #843 BY DREAM ON ME INC., OR A SURFACE THAT IS LEVEL, STABLE AND
STRUCTURALLY SOUND WITH A MINIMUM SURFACE DIMENSIONS OF 20” X 58”
5
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
Follow us on
to get your nursery featured on our social media.
@EvolurBaby @evolurbaby
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

evolur 851 User manual

851
evolur
Brand
evolur
Model
851
Type
User manual

Evolur 851 is a changing tray designed to provide a safe and convenient surface for changing your baby's diapers. It is compatible with Evolur dressers #816, #838, or #843, and it requires a changing pad sized 32.50” X 17” X 1”. The tray is easy to assemble and can be secured to the changing surface of the dresser. It is important to ensure that the dresser is level, stable, and structurally sound with minimum surface dimensions of 20” X 58”. For safety, always keep your child within arm's reach and discontinue using the changing tray once your child reaches a maximum weight of 30 lbs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents