Rough Country 2in LED Cube Lights Installation guide

Brand
Rough Country
Model
2in LED Cube Lights
Type
Installation guide

This manual is also suitable for

JEEP JK 2” LED FOG LIGHT MOUNTS
927052000
INSTALLATION INSTRUCTIONS
1. Using a Phillips Screwdriver, remove filler panel from between bumper and grill. See Photo 1.
2. Using a 18mm socket, remove the 8 nuts from the rear of the front bumper. See Photo 2.
3. Unplug fog lights and pull the push pin wire ties from the bumper.
4. Using a Phillips screwdriver, remove the factory fog lights from bumper. See Photo 3
PHOTO 1 PHOTO 2
PHOTO 3 PHOTO 4
These brackets only work in the factory Jeep JK bumper. Only fit RC 2-inch Square LED Cree lights. (Included)
TOOLS NEEDED
13mm & 18mm Socket/Wrench
Phillips Screwdriver
2.5mm Allen
KIT CONTENTS
Rough Country 2” LED Lights (2)
2” LED FOG LIGHT MOUNT (2)
2” LED FOG LIGHT FILLER PLATE (2)
3mm-.5mm x 12mm LONG Bolt (4)
Thank you for choosing Rough Country for all your suspension needs.
Please read instructions before beginning installation. Check the kit hardware against the kit contents
shown below. Be sure you have all needed parts and know where they go.
927052000
6. Place flat Filler plate over light using supplied 3mm bolts. Tighten using 2.5mm Allen. See Photo 5.
7. Place light inside housing and tighten nut with 13mm wrench. See Photo 6.
8. Place assembled lights into bumper using factory hardware and tighten with Phillips screwdriver. See Photo 7.
9. Reinstall bumper using factory hardware, tighten with 18mm socket. See Photo 8.
10. Wire LED lights and enjoy!
Thank You for choosing Rough Country for your off road needs!!!
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applica-
ble Federal, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers
responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer
expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase,
ownership, or use of the items.
PHOTO 5 PHOTO 6
PHOTO 7 PHOTO 8
  • Page 1 1
  • Page 2 2

Rough Country 2in LED Cube Lights Installation guide

Brand
Rough Country
Model
2in LED Cube Lights
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents