Euri Lighting ET8-1140H-20 Installation guide

Brand: Euri Lighting

Model: ET8-1140H-20

Type: Installation guide

Euri Lighting ET8-1140H-20 is a 4ft Hybrid LED Tube designed to replace traditional fluorescent tubes in indoor, damp locations. It offers energy savings and long-lasting performance, eliminating the need for frequent replacements. This LED tube is compatible with most magnetic and electronic ballasts, but bypassing the ballast is recommended for optimal performance. Professional installation is required for bypassing the ballast to ensure safety and proper functionality.

INSTALLATION GUIDE

MODEL #: ET8-1140H-20

For customer service please call us at 1-888-743-5766

Ofce Hours: 8:00 a.m. – 5:00 p.m. PST Monday-Friday

Questions?



WARNING!

DOUBLE ENDED INSTALLATION IS NOT RECOMMENDED

DUE TO POTENTIAL RISK OF FIRE OR ELECTRIC SHOCK

THIS PRODUCT MAY NOT BE COMPATIBLE WITH ALL BALLASTS, FOR MORE INFORMATION ABOUT BALLAST COMPATIBILITY PLEASE VISIT: WWW.EURILIGHTING.COM

Linear Series | T8 Class

4 ft. Hybrid LED Tube

PLEASE REVIEW THE INSTRUCTIONS AND WARNINGS LISTED BELOW PRIOR TO PROPER INSTALLATION

This LED tube is intended to replace uorescent tube lamps with an ANSI designation 32W/48T8/RS, 32W/48T8

WARNINGS CAUTIONS

• Risk of fire / electrical shock

• LED Hybrid Tube bypass ballast installation requires knowledge of

luminaire electrical systems.

(If you are not a qualified electrician, please do not attempt bypass

ballast installation.)

• Risk of electric shock – disconnect power at source before installation

• Do not make or alter any open holes in an enclosure of wiring or

electrical components during installation.

• If lamp or luminaire exhibits abnormal operation (buzzing, flickering,

minimal light, etc.), turn off power, remove lamp and contact us. For

more information please visit www.eurilighting.com or call our toll-free

number 1-888-743-5766.

• Do not use with dimmers.

• Do not look directly at the operating LED Hybrid Tube.

• Do not touch this product with wet hands.

• Do not disassemble, repair or alter lamp.

• Designed for indoor applications only.

• Suitable for damp locations.

• The luminaires shall be grounded.

• Be careful not to touch the lamp pins to the metal housing

when installing.

• This Device is not intended for use with emergency exits or

emergency lights.

WHEN BYPASSING A BALLAST ALWAYS HAVE A QUALIFIED ELECTRICIAN DO YOUR ELECTRICAL WORK.

DIRECT REPLACEMENT INSTALLATION INSTRUCTIONS

1. Turn-off power before installation | 2. Replace traditional uorescent tube with LED Hybrid tube | 3.Turn-on power and enjoy your new LED Hybrid Tube.

BYPASS BALLAST INSTALLATION INSTRUCTIONS

Single Ended Bypassing of Magnetic / Electronic Ballast

1. Turn-off power before installation.

2. Remove the existing ballast and existing starter (If present)

3. Replace uorescent tube with LED Hybrid Tube

FOR BYPASS INSTALLATION

SINGLE ENDED INSTALLATION ONLY.

(

PROFESSIONAL INSTALLATION IS REQUIRED.)

STEP 3

L N

LED Hybrid Tube