EKO K9IOC1080 User manual

Brand: EKO

Model: K9IOC1080

Type: User manual

INDOOR/OUTDOOR WI-FI

MAGNETIC SECURITY CAMERA

K9IOC1080

INSTRUCTION MANUAL

Please read this manual carefully before using, and keep it for future reference.

CONTENTS PAGE

General Safety Instructions 4

Product Overview 7

Batteries 8

Setup 9

App / Wi-Fi Control 10

Download EKO Home app 11

Start Setup Process 12

Adding Device 15

EKO App - Dashboard 20

Main Menu 21

Product Control Panel 22

Messages / Notiﬁcations (motion detect) 23

Settings 24

Home Management 25

Creating a Home 26

Adding Other Users to your Home 27

Add app to Google Home 30

Add app to Amazon Alexa Account 31

Installating Camera 32

Cleaning 33

Speciﬁcations 34

Customer Helpline Last Page

GENERAL SAFETY INSTRUCTIONS

Read this manual thoroughly before you start using this

product Store this manual, the completed warranty card, your

receipt and the product packaging.

• Do not tamper or change or modify the product in any way.

• Only use Accessories outlined and recommended by the

manufacturer.

• Please do not expose the product to splashing or

water contact

• Please do not place any object on top of the product

including objects ﬁlled with liquids such as vases.

IMPORTANT INFORMATION

GENERAL SAFETY INSTRUCTIONS GENERAL SAFETY INSTRUCTIONS

PLEASE READ BEFORE USE:

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety. Children should be supervised to ensure that

they do not play with the appliance.

• Please do not use any other accessories which not supplied

with this product.

• Do not attempt to open up and ﬁx or modify circuits inside

the unit.

• If the product is damaged, contact us at

help@eko-entertainment.com.au for advice.

• If the product requires repair, contact us at

help@eko-entertainment.com.au; never disassemble or

modify the product or attempt to service it yourself.

• The product is designed for indoor and outdoor use.

GENERAL SAFETY INSTRUCTIONS

• Before installing the product, make sure to place it away

from: heatsources, radiators or other products that produce

heat; areas with high temperatures and dust; open windows

and any place where water may get to the unit.

• Unpack the product and keep the original packaging

carton and materials in a safe place. It will help prevent any

damage if the product needs to be transported in the

future, and you can use it to store the product when it is

not in use.

• The product should always be repacked in its original

packaging whenever transporting to prevent any possible

damage to the product.

• When not in use: Disconnect from the power source and

store in a cool, dry and well ventilated location out of direct

sunlight, and not subject to humidity.

PRODUCT OVERVIEW

Plugs & Screws

2 x 18650 Batteries

Magnetic

Mount

BATTERIES

1. Press down the small button (circled below) located at the

top of camera and at the same time pull back of camera open.

2. Open up and place 18650 batteries into the battery

compartment. Make sure the polarities (+ / -) are in the

correct direction.

SETUP

MAKE SURE TO FULL CHARGE

Before installing the product into the location you want to

monitor for security purposes. Make sure that your product

batteries are installed and is 100% CHARGED.

You can do this by removing the bottom silicon lid at bottom

of product

C - Using the Micro USB Cable (included), plug in and charge

your camera (up to 2 hours). Leave this product charging until

you complete and ﬁnish connect to EKO Home app.

Battery status is available once connected (start from page 10)

WALL INSTALLATION RECOMMENDED AFTER APP SETUP.

INSTRUCTIONS ON PAGE 32

ON/OFF

MICRO SD

RESET

CHARGING

PORT

APP/Wi-Fi Control

Working with your mobile device, using your home Wi-Fi

network router to communicate with your product and

control it.

CONTROLLING THE SECURITY CAMERA REMOTELY IS

VERY SIMPLE. YOU WILL NEED:

- Android smartphone or tablet, or an Apple iPhone or iPad

- Internet connection at your home

- Wi-Fi network router set up at home.

You must also have the EKO Home App installed or updated

on your smartphone or mobile device. This app is available

from Google Play Store or Apple App Store.

PLEASE READ THROUGH THE FOLLOWING PAGES FOR

INSTRUCTIONS OF SETTING UP YOUR SECURITY CAMERA.

APP/Wi-Fi Control APP/Wi-Fi Control (Cont.)

APP/Wi-Fi Control (Cont.)

In order to do this, make sure you have the EKO Home App

installed or updated on your mobile device, your Wi-Fi router is

switched on and your mobile device connected to your home

Wi-Fi network.

On your mobile device, tap on the EKO Home app (1).

It will open and take you to the Login Page (2).

1 2

APP/Wi-Fi Control (Cont.) APP/Wi-Fi Control (Cont.)

Before you log in, please press SIGN UP and register your account

using an email address. (3 and 4).

3 4

APP/Wi-Fi Control (Cont.)

Once entered email address, tap GET VERIFICATION CODE and an

email will be sent your email address with a veriﬁcation code. Enter

this code.

Now you can enter a password for your account. Please remember

this password or write it down. (5)

3 4

APP/Wi-Fi Control (Cont.) APP/Wi-Fi Control (Cont.)

1. Tap the plus ( + ) or ADD DEVICE to add your device. (7).

2. Select the product which in this case is:

Smart Camera (WI-FI). (8)

APP/Wi-Fi Control (Cont.)

IMPORTANT

Before you can control your product remotely, you must reset

the Wi-Fi module on the unit.

To do so please follow on screen or below instructions:

1. Using the Micro USB Cable, plug USB side into a USB

powered adaptor, and the Micro USB side into the back

of the product.

2. Once the product is powered, the blue light will turn on at

the front, please leave as it is for up to 30 seconds. Now

that the product is on, On the EKO Home app “Reset the

device ﬁrst” page, tick the box indicated (9) and press next.

4. Select Wi-Fi network then enter in the password to

connect. (10)

Note: Make sure to select 2.4GHz

5GHz Wi-Fi Network will not work with this app.

5. Once Wi-Fi is entered, follow the on screen animation (11)

to scan the QR code generated within your app. If you

hear a Sound prompt, select the button “I Heard a Prompt”.

REFER TO NEXT PAGE --->

APP/Wi-Fi Control (Cont.) APP/Wi-Fi Control (Cont.)

9 10 11

APP/Wi-Fi Control (Cont.)

Now that the device is being added, progress screen will now appear

as to below: (12, 13, 14).

12 13 14

APP/Wi-Fi Control (Cont.)

Now that the device is being added, progress screen will now appear

as to below: (12, 13, 14).

APP/Wi-Fi Control (Cont.)

Once completed, it will show your product is now added. click

DONE. Click on the device name and you can now start navigating

the controls of the app. (15)

K9IOC1080

APP/Wi-Fi Control (Cont.)

EKO HOME DASHBOARD

PROFILE

HOME

VIEW ALL

CAMERAS

LIVE VIDEO

ADD PRODUCT

WEATHER

SELECT OR

ADD ROOMS

CLICK TO

ENTER PRODUCT

CONTROLS

SCHEDULES/

AUTOMATIONS

MAIN MENU/

HOME

MANAGEMENT/

NOTIFICATIONS

VOICE CONTROL

Page is loading ...

EKO K9IOC1080 User manual

EKO K9IOC1080 User manual

Related papers

Other documents