14
APP/Wi-Fi Control (Cont.)
IMPORTANT
Before you can control your product remotely, you must reset
the Wi-Fi module on the unit.
To do so please follow on screen or below instructions:
1. Using the Micro USB Cable, plug USB side into a USB
powered adaptor, and the Micro USB side into the back
of the product.
2. Once the product is powered, the blue light will turn on at
the front, please leave as it is for up to 30 seconds, the
camera will rotate during startup process, once ready it will
make a sound prompt.
3. Now that the product is on, sound prompt is heard.
On the EKO Home app “Reset the device first” page, tick
the box indicated (8) and press next.
4. Select Wi-Fi network then enter in the password to
connect. (9)
Note: Make sure to select 2.4GHz
5GHz Wi-Fi Network will not work with this app.
5. Once Wi-Fi is entered, follow the on screen animation (10)
to scan the QR code generated within your app. If you
hear a Sound prompt, select the button “I Heard a Prompt”.
REFER TO NEXT PAGE --->