ROHS MB-i9650 Quick Installation Manual
- Category
- Motherboards
- Type
- Quick Installation Manual
Quick Installation Guide
Version 1.2
MB-i9650
Micro ATX Industrial Motherboard
Form Factor
ATX Industrial
Motherboard
LAN
2 x Intel® 82573V
PCIe 10/100/1000
Base-T Ethernet
CPU
Intel® Mobile Merom
Processor (FSB800/
533MHz)
I/O
1xCF II/ 1xPCIe*16/
1xPCIe*1/ 1xMini PCI/
2xPCI/ 3xSATA II/
2xeSATA / 8xUSB 2.0/
1xIDE/ 6xCOM/ 1xLPT/
1xFDD/ 16 bit DIO
Chipset
Intel
®
GME965
Intel
®
ICH8M
Audio
Realtek ALC888 HD
Audio Codec,
7.1 channel.
Video
CRT / DVI / HDMI /
TV-out / LVDS
24/48bit
4041965000120P
Copyright
®
2011 All Rights Reserved.
If you have any technical difculties, please consult the user's manual rst at:
ftp://ftp.arbor.com.tw/pub/manual
Please do not hesitate to call or e-mail our customer service when you still can not
nd out the answer.
http://www.arbor.com.tw
E-mail: info@arbor.com.tw
♦ Technical Support
Declaration of Conformity
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
1
2. Ordering Information
MB-i9650VL2G Micro ATX Industrial Motherboard with 6 x COM, 3 x SATAII,
2 x eSATA, 8 x USB, CRT, LCD, Audio and Dual Gb LAN
Cable Kit CBK-06-9650-00
3 x COM Flat cables
2 x USB cables
1 x FDD cable
1 x IDE Flat cable
1 x Printer Flat cable
3 x Serial SATA cables
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1. Packing List
1 x MB-i9650 Industrial Motherboard
1 x Driver CD
1 x Quick Installation Guide
3. The Installation Paths of CD Driver
Driver Path
AUDIO \AUDIO\REALTEK_HD\WINDOWS_R178
CHIPSET \CHIPSET\INTEL\INF 8.3
LAN \ETHERNET\INTEL\PHY_82566DM\2K_XP
VGA \GRAPHICS\INTEL_2K_XP_32\1431
\GRAPHICS\INTEL_VISTA_32\1544
2
4. Specifications
Form Factor Micro ATX Industrial Motherboard
CPU
Supports socket mPGA-478 for Intel® Mobile Merom
Processor up to 800MHz FSB
Chipset Intel® GME965 + Intel® ICH8M
System Memory 2 x 240pin DIMM socket up to 4GB DDR2 SDRAM
VGA Controller
Integrated Intel® Graphics Media Accelerator X3100
(Intel® GMA X3100)
24/48 bit LVDS, Dual-channel, CRT, TV-out (support
NTSC/PAL/ SDTV/HDTV), DVI & HDMI (optional)
Ethernet 2 x Intel® 82573V PCIe Gb LAN
I/O Chips Winbond W83627HG
BIOS AMI PnP Flash BIOS
Audio ALC888 HD Codec, 7.1 channel/MIC-in/Line-in/Line-out
Serial ATA
3 x Serial ATA II (SATA) with 300MB/s
2 x External Serial ATA (eSATA)
IDE Interface 1 x Ultra DMA 100/66/33, support 2 IDE devices
Serial Port
6 x COM port (RS-232)
COM2: RS-232/422/485 Selectable
Parallel Port
Floppy
1 x SPP/EPP/ECP mode
1 x Floppy connector
IrDA 1 x IrDA connector
KBMS
1 x Standard PS/2 Keyboard connector
1 x Standard PS/2 Mouse connector
Universal Serial Bus 8 x USB 2.0
DIO 16-bit programmable Digital I/O (8 bit In/ 8 bit Out)
Expansion Interface
1 x PCIe*16 slot
1 x PCIe*1 slot
2 x PCI slot
1 x Mini PCI socket
Hardware Monitor Chip Integrated in W83627HG
Operation Temp. -20ºC ~ +70ºC (-4ºF ~ +158ºF)
Watchdog Timer 255-level Reset
Dimension (L x W) 244 x 244 mm (9.6” x 9.6”)
3
5. Jumpers/ Connectors Quick Reference
Connectors
Label Description
ATX12V1 ATX 12V Connector
ATX1
ATX Power Supply
Connector
KBM1 Keyboard & Mouse
ESATA1
External Serial ATA
Connector
LAN1, LAN2
RJ-45 Connector & stack
USB port
CPUF1
CPU Fan Power
Connector
SYSF1, SYSF2 Fan Power Connector
FDD1 FDD Connector
IDE1 IDE Connector
LPT1 Parallel Port Connector
TV1 TV-Out Connector
SATA1~3 Serial ATA Connectors
J1 HD AUDIO Connector
INV1 LCD inverter Connector
LVDS LVDS Connector
HDMI HDMI Connector
CFD1
CompactFlash Disk
socket
USB3, 4 USB Connector
IR1 Infrared Connector
CON1
RS-422/ 485 Output
Connector
JFRT1 Switches and Indicators
DIO1 Digital I/O Connector
TPM1
Trusted Platform Module
Connector
COM1~6 RS-232 Connectors
VGA1 CRT/ DVI Connector
Jumpers
Label Description
JPWR1
AT/ATX Power Mode
Select
JBAT1 Clear CMOS Setup
JVLCD1
LCD Panel Voltage
Selector
JRS1
COM2 RS-232/422/485
Mode Select
JP8
Compact Flash Mster/
Slave Selec
JP1~2,
JP4~JP7
COM Port Power Special
Support
4
5.1 Board Layout Top View
NO COMPONENT
1
1
2
1
mPGA478B
245.00
245.00
10.16
45.7220.9425.4722.9830.8731.9219.58
33.02 204.47
154.94
35.45
155.85
66.04157.48
3.81
2.44
ø4.06
Unit:mm
5
5.2 Jumpers & Connectors
18
S ATA 1
19
S ATA 2
20
S ATA 3
16
SYSF2
7
CPUF1
1
ATX12V1
DIMM2DIMM1
8
FDD1
9
IDE1
10
LPT1
1
mPGA478
3
KBM1
4
2 x eSATA
2
ATX1
14
LVDS1
22
J2
26
CON1
37
COM1
36
COM2
35
COM3
34
COM4
33
COM5
32
COM6
30
SYSF1
25
IR1
31
TPM1
24
USB3
29
USB4
28
DIO1
27
JFRT1
23
CFD1
5
CRT / DVI
15
J1
38
JPWR1
13
LAN2
2 x USB
6
LAN1
2 x USB
21
MINIPCI1
12
INV1
11
TV1
JVLCD1
JBAT1
39
JP8
42
JP7
43
JP6
44
JP5
45
JP4
46
JP2
47
JP1
48
JRS1
41
40
KB
MS
eSATA
eSATA
CRT
DVI
LAN
USB
USB
LAN
USB
USB
HD Audio
87
5 6
5.2. Jumpers & Connectors
5.2.15 IDE1: 40-pin IDE Connector (9)
Pin Description Pin Description
1 IDE RESET 2 GND
3 DATA7 4 DATA8
5 DATA6 6 DATA9
7 DATA5 8 DATA10
9 DATA4 10 DATA11
11 DATA3 12 DATA12
13 DATA2 14 DATA13
15 DATA1 16 DATA14
17 DATA0 18 DATA15
19 GND 20 N/C
21 REQ 22 GND
23 IO WRITE 24 GND
25 IO READ 26 GND
27 IO READY 28 IDESEL
29 DACK 30 GND
31 IRQ14 32 N/C
33 ADDR1 34 ATA66 DETECT
35 ADDR0 36 ADDR2
37 CS#1 38 CS#3
39 IDEACTP 40 GND
Jumpers
5.2.2 JBAT1: CMOS Setup (39)
Pin Mode
1-2 Keep CMOS (Default)
2-3 Clear CMOS
5.2.5 JP8: Compact Flash Select (42)
Pin Mode
Short Master
Open Slave (Default)
5.2.1 JPWR1: AT/ATX Power
Mode (38)
Pin 1-2 Mode
Short AT Mode
Open ATX Mode (Default)
Pin Voltage
1 - 2 +5V
2 - 3 +3.3V (Default)
Pin Description Pin Description
1 GND 2 Drive Density Select 0
3 GND 4 N/C
5 GND 6 N/C
7 GND 8 Index#
9 GND 10 Motor Enabled A
11 GND 12 N/C
13
GND
14 Driver Select A
15 GND 16 N/C
17 GND 18 Direction#
19 GND 20 Step#
21 GND 22 Write Data#
23 GND 24 Write Gate#
25 GND 26 Track 0#
27 GND 28 Write Protect#
29 GND 30 Read Data#
31 GND 32 Head Select#
33 GND 34 Disk Change#
5.2.14 FDD1: 34-pin FDD Connector
(8)
Connectors
5.2.8 ATX1: ATX Power Supply
Connector (2)
Pin Description Pin Description
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 GND 3 GND
16 PS-ON 4 +5V
17 GND 5 GND
18 GND 6 +5V
19 GND 7 GND
20 -5V 8 PW-OK
21 +5V 9 +5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 GND 12 +3.3V
5.2.7 ATX12V1: ATX +12V Connector
(1)
Pin Description Pin Description
1 GND 3 +12V
2 GND 4 +12V
18
SATA1
19
SATA2
20
SATA3
16
SYSF2
7
CPUF1
1
ATX12V1
DIMM2DIMM1
8
FDD1
9
IDE1
10
LPT1
1
mPGA478
3
KBM1
4
2 x eSATA
2
ATX1
14
LVDS1
22
J2
17
HDMI1
26
CON1
37
COM1
36
COM2
35
COM3
34
COM4
33
COM5
32
COM6
30
SYSF1
25
IR1
31
TPM1
24
USB3
29
USB4
28
DIO1
27
JFRT1
23
CFD1
5
CRT / DVI
15
J1
38
JPWR1
13
LAN2
2 x USB
6
LAN1
2 x USB
21
MINIPCI1
12
INV1
11
TV1
JVLCD1
JBAT1
39
JP8
42
JP7
43
JP6
44
JP5
45
JP4
46
JP2
47
JP1
48
JRS1
41
40
5.2.9 KBM1: PS/2 Keyboard & Mouse
2 x Mini-DIN 6-pin connectors (3)
5.2.11 VGA1: CRT Connector D-SUB
15-pin female + DVI connector female
(5)
5.2.12 LAN1, LAN2 : 10/100/1000 RJ45
+ 2 x USB ports: (6), (13)
5.2.10 ESATA1 : Exteranl Serial ATA
Connector : 2 x eSATA (4)
5.2.16 LPT1: 26-pin Parallel Port
Connector (10)
Pin Description Pin Description
1 STROBE# 2 AFD#
3 PTD0 4 Error#
5 PTD1 6 INIT#
7 PTD2 8 SLIN#
9 PTD3 10 GND
11 PTD4 12 GND
13 PTD5 14 GND
15 PTD6 16 GND
17 PTD7 18 GND
19 ACK# 20 GND
21 Busy 22 GND
23 PE 24 GND
25 Select 26 N/C
5.2.17 TV1:TV-Out Connector (11)
Pin Description
1 TV-CVBS
2 GND
3 TV_Y
4 GND
5 TV_C
6 GND
5.2.6 JP1, JP2, JP4, JP5, JP6, JP7:
COM Port Power Special
Support (43), (44), (45), (46),
(47), (48)
Pin Voltage
1 - 2 Standard signal for Pin-9 (Default)
2 - 3 +12V
5.2.4 JSR1: COM2 RS-232/422/485
Select (41)
Pin Mode
1-2 (Short) RS-232 (Default)
3-4 (Short) RS-422
5-6 (Short) RS-485
It can be congured COM2 to operate in RS-232,
RS-422 or RS-485 mode.
5.2.3 JVLCD1: LCD Panel Voltage
Selector (40)
The voltage of LCD panel could be selected by
JVLCD1 in +5V or +3.3V.
5.2.13 CPUF1/SYSF1/SYSF2: FAN
Connectors (7), (30), (16)
Pin Description
1 GND
2 +12V
3 Fan_Detect
KB
MS
eSATA
eSATA
CRT
DVI
LAN
USB
USB
LAN
USB
USB
HD Audio
87
5 6
5.2. Jumpers & Connectors
5.2.15 IDE1: 40-pin IDE Connector (9)
Pin Description Pin Description
1 IDE RESET 2 GND
3 DATA7 4 DATA8
5 DATA6 6 DATA9
7 DATA5 8 DATA10
9 DATA4 10 DATA11
11 DATA3 12 DATA12
13 DATA2 14 DATA13
15 DATA1 16 DATA14
17 DATA0 18 DATA15
19 GND 20 N/C
21 REQ 22 GND
23 IO WRITE 24 GND
25 IO READ 26 GND
27 IO READY 28 IDESEL
29 DACK 30 GND
31 IRQ14 32 N/C
33 ADDR1 34 ATA66 DETECT
35 ADDR0 36 ADDR2
37 CS#1 38 CS#3
39 IDEACTP 40 GND
Jumpers
5.2.2 JBAT1: CMOS Setup (39)
Pin Mode
1-2 Keep CMOS (Default)
2-3 Clear CMOS
5.2.5 JP8: Compact Flash Select (42)
Pin Mode
Short Master
Open Slave (Default)
5.2.1 JPWR1: AT/ATX Power
Mode (38)
Pin 1-2 Mode
Short AT Mode
Open ATX Mode (Default)
Pin Voltage
1 - 2 +5V
2 - 3 +3.3V (Default)
Pin Description Pin Description
1 GND 2 Drive Density Select 0
3 GND 4 N/C
5 GND 6 N/C
7 GND 8 Index#
9 GND 10 Motor Enabled A
11 GND 12 N/C
13
GND
14 Driver Select A
15 GND 16 N/C
17 GND 18 Direction#
19 GND 20 Step#
21 GND 22 Write Data#
23 GND 24 Write Gate#
25 GND 26 Track 0#
27 GND 28 Write Protect#
29 GND 30 Read Data#
31 GND 32 Head Select#
33 GND 34 Disk Change#
5.2.14 FDD1: 34-pin FDD Connector
(8)
Connectors
5.2.8 ATX1: ATX Power Supply
Connector (2)
Pin Description Pin Description
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 GND 3 GND
16 PS-ON 4 +5V
17 GND 5 GND
18 GND 6 +5V
19 GND 7 GND
20 -5V 8 PW-OK
21 +5V 9 +5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 GND 12 +3.3V
5.2.7 ATX12V1: ATX +12V Connector
(1)
Pin Description Pin Description
1 GND 3 +12V
2 GND 4 +12V
18
SATA1
19
SATA2
20
SATA3
16
SYSF2
7
CPUF1
1
ATX12V1
DIMM2DIMM1
8
FDD1
9
IDE1
10
LPT1
1
mPGA478
3
KBM1
4
2 x eSATA
2
ATX1
14
LVDS1
22
J2
17
HDMI1
26
CON1
37
COM1
36
COM2
35
COM3
34
COM4
33
COM5
32
COM6
30
SYSF1
25
IR1
31
TPM1
24
USB3
29
USB4
28
DIO1
27
JFRT1
23
CFD1
5
CRT / DVI
15
J1
38
JPWR1
13
LAN2
2 x USB
6
LAN1
2 x USB
21
MINIPCI1
12
INV1
11
TV1
JVLCD1
JBAT1
39
JP8
42
JP7
43
JP6
44
JP5
45
JP4
46
JP2
47
JP1
48
JRS1
41
40
5.2.9 KBM1: PS/2 Keyboard & Mouse
2 x Mini-DIN 6-pin connectors (3)
5.2.11 VGA1: CRT Connector D-SUB
15-pin female + DVI connector female
(5)
5.2.12 LAN1, LAN2 : 10/100/1000 RJ45
+ 2 x USB ports: (6), (13)
5.2.10 ESATA1 : Exteranl Serial ATA
Connector : 2 x eSATA (4)
5.2.16 LPT1: 26-pin Parallel Port
Connector (10)
Pin Description Pin Description
1 STROBE# 2 AFD#
3 PTD0 4 Error#
5 PTD1 6 INIT#
7 PTD2 8 SLIN#
9 PTD3 10 GND
11 PTD4 12 GND
13 PTD5 14 GND
15 PTD6 16 GND
17 PTD7 18 GND
19 ACK# 20 GND
21 Busy 22 GND
23 PE 24 GND
25 Select 26 N/C
5.2.17 TV1:TV-Out Connector (11)
Pin Description
1 TV-CVBS
2 GND
3 TV_Y
4 GND
5 TV_C
6 GND
5.2.6 JP1, JP2, JP4, JP5, JP6, JP7:
COM Port Power Special
Support (43), (44), (45), (46),
(47), (48)
Pin Voltage
1 - 2 Standard signal for Pin-9 (Default)
2 - 3 +12V
5.2.4 JSR1: COM2 RS-232/422/485
Select (41)
Pin Mode
1-2 (Short) RS-232 (Default)
3-4 (Short) RS-422
5-6 (Short) RS-485
It can be congured COM2 to operate in RS-232,
RS-422 or RS-485 mode.
5.2.3 JVLCD1: LCD Panel Voltage
Selector (40)
The voltage of LCD panel could be selected by
JVLCD1 in +5V or +3.3V.
5.2.13 CPUF1/SYSF1/SYSF2: FAN
Connectors (7), (30), (16)
Pin Description
1 GND
2 +12V
3 Fan_Detect
KB
MS
eSATA
eSATA
CRT
DVI
LAN
USB
USB
LAN
USB
USB
HD Audio
87
5 6
5.2. Jumpers & Connectors
5.2.15 IDE1: 40-pin IDE Connector (9)
Pin Description Pin Description
1 IDE RESET 2 GND
3 DATA7 4 DATA8
5 DATA6 6 DATA9
7 DATA5 8 DATA10
9 DATA4 10 DATA11
11 DATA3 12 DATA12
13 DATA2 14 DATA13
15 DATA1 16 DATA14
17 DATA0 18 DATA15
19 GND 20 N/C
21 REQ 22 GND
23 IO WRITE 24 GND
25 IO READ 26 GND
27 IO READY 28 IDESEL
29 DACK 30 GND
31 IRQ14 32 N/C
33 ADDR1 34 ATA66 DETECT
35 ADDR0 36 ADDR2
37 CS#1 38 CS#3
39 IDEACTP 40 GND
Jumpers
5.2.2 JBAT1: CMOS Setup (39)
Pin Mode
1-2 Keep CMOS (Default)
2-3 Clear CMOS
5.2.5 JP8: Compact Flash Select (42)
Pin Mode
Short Master
Open Slave (Default)
5.2.1 JPWR1: AT/ATX Power
Mode (38)
Pin 1-2 Mode
Short AT Mode
Open ATX Mode (Default)
Pin Voltage
1 - 2 +5V
2 - 3 +3.3V (Default)
Pin Description Pin Description
1 GND 2 Drive Density Select 0
3 GND 4 N/C
5 GND 6 N/C
7 GND 8 Index#
9 GND 10 Motor Enabled A
11 GND 12 N/C
13
GND
14 Driver Select A
15 GND 16 N/C
17 GND 18 Direction#
19 GND 20 Step#
21 GND 22 Write Data#
23 GND 24 Write Gate#
25 GND 26 Track 0#
27 GND 28 Write Protect#
29 GND 30 Read Data#
31 GND 32 Head Select#
33 GND 34 Disk Change#
5.2.14 FDD1: 34-pin FDD Connector
(8)
Connectors
5.2.8 ATX1: ATX Power Supply
Connector (2)
Pin Description Pin Description
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 GND 3 GND
16 PS-ON 4 +5V
17 GND 5 GND
18 GND 6 +5V
19 GND 7 GND
20 -5V 8 PW-OK
21 +5V 9 +5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 GND 12 +3.3V
5.2.7 ATX12V1: ATX +12V Connector
(1)
Pin Description Pin Description
1 GND 3 +12V
2 GND 4 +12V
18
SATA1
19
SATA2
20
SATA3
16
SYSF2
7
CPUF1
1
ATX12V1
DIMM2DIMM1
8
FDD1
9
IDE1
10
LPT1
1
mPGA478
3
KBM1
4
2 x eSATA
2
ATX1
14
LVDS1
22
J2
17
HDMI1
26
CON1
37
COM1
36
COM2
35
COM3
34
COM4
33
COM5
32
COM6
30
SYSF1
25
IR1
31
TPM1
24
USB3
29
USB4
28
DIO1
27
JFRT1
23
CFD1
5
CRT / DVI
15
J1
38
JPWR1
13
LAN2
2 x USB
6
LAN1
2 x USB
21
MINIPCI1
12
INV1
11
TV1
JVLCD1
JBAT1
39
JP8
42
JP7
43
JP6
44
JP5
45
JP4
46
JP2
47
JP1
48
JRS1
41
40
5.2.9 KBM1: PS/2 Keyboard & Mouse
2 x Mini-DIN 6-pin connectors (3)
5.2.11 VGA1: CRT Connector D-SUB
15-pin female + DVI connector female
(5)
5.2.12 LAN1, LAN2 : 10/100/1000 RJ45
+ 2 x USB ports: (6), (13)
5.2.10 ESATA1 : Exteranl Serial ATA
Connector : 2 x eSATA (4)
5.2.16 LPT1: 26-pin Parallel Port
Connector (10)
Pin Description Pin Description
1 STROBE# 2 AFD#
3 PTD0 4 Error#
5 PTD1 6 INIT#
7 PTD2 8 SLIN#
9 PTD3 10 GND
11 PTD4 12 GND
13 PTD5 14 GND
15 PTD6 16 GND
17 PTD7 18 GND
19 ACK# 20 GND
21 Busy 22 GND
23 PE 24 GND
25 Select 26 N/C
5.2.17 TV1:TV-Out Connector (11)
Pin Description
1 TV-CVBS
2 GND
3 TV_Y
4 GND
5 TV_C
6 GND
5.2.6 JP1, JP2, JP4, JP5, JP6, JP7:
COM Port Power Special
Support (43), (44), (45), (46),
(47), (48)
Pin Voltage
1 - 2 Standard signal for Pin-9 (Default)
2 - 3 +12V
5.2.4 JSR1: COM2 RS-232/422/485
Select (41)
Pin Mode
1-2 (Short) RS-232 (Default)
3-4 (Short) RS-422
5-6 (Short) RS-485
It can be congured COM2 to operate in RS-232,
RS-422 or RS-485 mode.
5.2.3 JVLCD1: LCD Panel Voltage
Selector (40)
The voltage of LCD panel could be selected by
JVLCD1 in +5V or +3.3V.
5.2.13 CPUF1/SYSF1/SYSF2: FAN
Connectors (7), (30), (16)
Pin Description
1 GND
2 +12V
3 Fan_Detect
KB
MS
eSATA
eSATA
CRT
DVI
LAN
USB
USB
LAN
USB
USB
HD Audio
9
11 12
10
5.2.19 LVDS1: LVDS LCD Connector
(14)
The LVDS connector on board 30-pin header and
supports 18/36-bit.
Pin Description Pin Description
1 VDD 2 VDD
3 TX1CLK+ 4 TX2CLK+
5 TX1CLK- 6 TX2CLK-
7 GND 8 GND
9 TX1D0+ 10 TX2D0+
11 TX1D0- 12 TX2D0-
13 GND 14 GND
15 TX1D1+ 16 TX2D1+
17 TX1D1- 18 TX2D1-
19 GND 20 GND
21 TX1D2+ 22 TX2D2+
23 TX1D2- 24 TX2D2-
25 GND 26 GND
27 TX1D3+ 28 TX2D3+
29 TX1D3- 30 TX2D3-
5.2.18 INV1: LCD Inverter Connector
(12)
Pin Description
1 +12V
2 GND
3 On/Off
4 Brightness Control
5 GND
5.2.32 COM1~6: RS-232 Connectors
(32 ~ 37)
Pin Description Pin Description
1 DCD# 2 RXD
3 TXD 4 DTR#
5 GND 6 DSR#
7 RTS# 8 CTS#
9 RI# 10 N/C
5.2.31 TPM1: Trusted Platform
Module Connector (31)
Pin Description Pin Description
1 CLK 2 GND
3 LFRAME 4 N/C
5 LRESET 6 N/C
7 LAD3 8 LAD2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 N/C 14 N/C
15 +3.3V_SB 16 SERIRQ
17 GND 18 CLKRUN
19 PD 20 N/C
5.2.30 DIO1: Digital I/O Connector (28)
DIO1 is a 16 bit DIO connector w/ Onboard 20-pin
header connector, supports 8 bit In/ 8 bit Out.
Pin Description Pin Description
1 DIO0 2 DIO1
3 DIO2 4 DIO3
5 DIO4 6 DIO5
7 DIO6 8 DIO7
9 GND 10 GND
11 DIO8 12 DIO9
13 DIO10 14 DIO11
15 DIO12 16 DIO13
17 DIO14 18 DIO15
19 +5V 20 +12V
5.2.29 JFRT1: Switches and Indicators
(27)
It provides connectors for system indicators that
provides light indication of the computer activities
and switches to change the computer status.
Pin Description Pin Description
1 Power LED+ 2 PWRBTN+
3 GND 4 PWRBTN-
5 GND 6 RESET+
7 HDD_LED+ 8 RESET-
9 HDD_LED- 10 SPEAKER+
11 SMBCLK 12 SPEAKER+
13 SMBDATA 14 SPEAKER-
15 GND 16 SPEAKER-
5.2.28 IR1: IrDA Connector (25)
Pin Description
1 +5V
2 N/C
3 IRRX
4 GND
5 IRTX
5.2.25 CFD1 : Compact Flash Disk
socket (share with IDE1) (23)
Pin Description Pin Description
1 +5V 2 +5V
3 USBD- 4 USBD-
5 USBD+ 6 USBD+
7 GND 8 GND
9 GND 10 N/C
5.2.26 USB3/ USB4: USB Connectors
(24), (29)
5.2.27 CON1: RS-422 / 485 Output
Connector (26)
Pin RS-422 RS-485
1 TX+ DATA+
2 TX- DATA-
3 RX+ N/C
4 RX- N/C
5.2.24 J2: Front Panel Audio
Connector (22)
Pin Description Pin Description
1 MIC2_L 2 GND
3 MIC2_R 4 PRESENCE
5 LINE2_R 6 MIC2_JD
7 SENSE 8 N/C
9 LINE2_L 10 LINE2_JD
5.2.23 MINIPCI1 : MiniPCI interface
(21)
5.2.20 J1: HD Audio Interface phone
jacks (15)
ALC888 is 7.1 channel High Denition (HD) Audio
Codec.
5.2.22 SATA1, SATA2, SATA3: Serial
ATA II Connectors (18), (19), (20)
High speed transfer rates (300MB/s).
5.2.21 HDMI1: HDM1 Connector (17)
Pin Description Pin Description
1 GND 2 CLOCK-
3 N/C 4 CLOCK+
5 +5V 6 GND
7 GND 8 DATA0-
9 Detect 10 DATA0+
11 N/C 12 DATA1-
13 GND 14 DATA1+
15 SCL 16 GND
17 SDA 18 DATA2-
19 GND 20 DATA2+
This page is intentionally left blank. This page is intentionally left blank.
9
11 12
10
5.2.19 LVDS1: LVDS LCD Connector
(14)
The LVDS connector on board 30-pin header and
supports 18/36-bit.
Pin Description Pin Description
1 VDD 2 VDD
3 TX1CLK+ 4 TX2CLK+
5 TX1CLK- 6 TX2CLK-
7 GND 8 GND
9 TX1D0+ 10 TX2D0+
11 TX1D0- 12 TX2D0-
13 GND 14 GND
15 TX1D1+ 16 TX2D1+
17 TX1D1- 18 TX2D1-
19 GND 20 GND
21 TX1D2+ 22 TX2D2+
23 TX1D2- 24 TX2D2-
25 GND 26 GND
27 TX1D3+ 28 TX2D3+
29 TX1D3- 30 TX2D3-
5.2.18 INV1: LCD Inverter Connector
(12)
Pin Description
1 +12V
2 GND
3 On/Off
4 Brightness Control
5 GND
5.2.32 COM1~6: RS-232 Connectors
(32 ~ 37)
Pin Description Pin Description
1 DCD# 2 RXD
3 TXD 4 DTR#
5 GND 6 DSR#
7 RTS# 8 CTS#
9 RI# 10 N/C
5.2.31 TPM1: Trusted Platform
Module Connector (31)
Pin Description Pin Description
1 CLK 2 GND
3 LFRAME 4 N/C
5 LRESET 6 N/C
7 LAD3 8 LAD2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 N/C 14 N/C
15 +3.3V_SB 16 SERIRQ
17 GND 18 CLKRUN
19 PD 20 N/C
5.2.30 DIO1: Digital I/O Connector (28)
DIO1 is a 16 bit DIO connector w/ Onboard 20-pin
header connector, supports 8 bit In/ 8 bit Out.
Pin Description Pin Description
1 DIO0 2 DIO1
3 DIO2 4 DIO3
5 DIO4 6 DIO5
7 DIO6 8 DIO7
9 GND 10 GND
11 DIO8 12 DIO9
13 DIO10 14 DIO11
15 DIO12 16 DIO13
17 DIO14 18 DIO15
19 +5V 20 +12V
5.2.29 JFRT1: Switches and Indicators
(27)
It provides connectors for system indicators that
provides light indication of the computer activities
and switches to change the computer status.
Pin Description Pin Description
1 Power LED+ 2 PWRBTN+
3 GND 4 PWRBTN-
5 GND 6 RESET+
7 HDD_LED+ 8 RESET-
9 HDD_LED- 10 SPEAKER+
11 SMBCLK 12 SPEAKER+
13 SMBDATA 14 SPEAKER-
15 GND 16 SPEAKER-
5.2.28 IR1: IrDA Connector (25)
Pin Description
1 +5V
2 N/C
3 IRRX
4 GND
5 IRTX
5.2.25 CFD1 : Compact Flash Disk
socket (share with IDE1) (23)
Pin Description Pin Description
1 +5V 2 +5V
3 USBD- 4 USBD-
5 USBD+ 6 USBD+
7 GND 8 GND
9 GND 10 N/C
5.2.26 USB3/ USB4: USB Connectors
(24), (29)
5.2.27 CON1: RS-422 / 485 Output
Connector (26)
Pin RS-422 RS-485
1 TX+ DATA+
2 TX- DATA-
3 RX+ N/C
4 RX- N/C
5.2.24 J2: Front Panel Audio
Connector (22)
Pin Description Pin Description
1 MIC2_L 2 GND
3 MIC2_R 4 PRESENCE
5 LINE2_R 6 MIC2_JD
7 SENSE 8 N/C
9 LINE2_L 10 LINE2_JD
5.2.23 MINIPCI1 : MiniPCI interface
(21)
5.2.20 J1: HD Audio Interface phone
jacks (15)
ALC888 is 7.1 channel High Denition (HD) Audio
Codec.
5.2.22 SATA1, SATA2, SATA3: Serial
ATA II Connectors (18), (19), (20)
High speed transfer rates (300MB/s).
5.2.21 HDMI1: HDM1 Connector (17)
Pin Description Pin Description
1 GND 2 CLOCK-
3 N/C 4 CLOCK+
5 +5V 6 GND
7 GND 8 DATA0-
9 Detect 10 DATA0+
11 N/C 12 DATA1-
13 GND 14 DATA1+
15 SCL 16 GND
17 SDA 18 DATA2-
19 GND 20 DATA2+
This page is intentionally left blank. This page is intentionally left blank.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
ROHS MB-i9650 Quick Installation Manual
- Category
- Motherboards
- Type
- Quick Installation Manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
DFI EXT-DP Reference guide
-
Arbor Technology ITX-i9453 Quick Installation Manual
-
Diamond Systems PLT-T40N-2G User manual
-
AMD Geode SBX-5363 User manual
-
Acrosser Technology AR-B1740 User manual
-
-
-
Commell LS-571 User manual
-
protech BE-0966 User manual
-
