ERNITEC Series EDNS7000 User manual

Digital Video Recorder

Series EDNS4000

Series EDNS6000

Series EDNS7000

4-8-16 camera system

3040-0079

DigiOp Installation Manual

Page 2 of 115

Table of Contents

4-8-16 camera system...............................................................................................................................1

3040-0079Table of Contents....................................................................................................................1

Table of Contents.....................................................................................................................................2

Introduction to Digital Video Recording .................................................................................................7

DigiOp Four Times Compression Efficiency.......................................................................................7

DigiOp provides Triplex on Remote....................................................................................................7

Main features of DigiOp ..........................................................................................................................7

Highly reliable maintenance-free Digital Security System..............................................................7

Fully compatible with existing CCTV Cameras and Equipment .....................................................7

Innovative Enhanced MPEG Compression Technology..................................................................7

High-speed search and clear printing...............................................................................................7

You can use a maximum of 16 CCTV Cameras at the same time...................................................8

Manipulation and alteration of recorded images are impossible as DigiOp uses Proprietary

Authentication..................................................................................................................................8

Real-time image transmission through the Internet .........................................................................8

What is DigiOp RemoteManager? ...................................................................................................8

Getting Started with DigiOp ..................................................................................................................10

Warning.......................................................................................................................................12

Cautions.............................................................................................................................................13

Important Safeguards .........................................................................................................................13

1. INTRODUCTION..............................................................................................................................15

Differences between “Real-time” Display and Normal Display........................................................15

2.0 DVR SYSTEM STRUCTURE AND INSTALLATION ......................................................15

2.1. Getting Started.........................................................................................................................15

2.2 Camera and Audio input connection leads.........................................................................15

3.0 Reset and Power Buttons........................................................................................................17

Reset Button:..................................................................................................................................17

Power Button:.................................................................................................................................17

Auto-recovery: ...............................................................................................................................17

3.1 EDNS4000 Hardware layout..................................................................................................19

3.2 EDNS6000 Series Hardware layout .......................................................................................21

3.3 EDNS7000 Series Hardware layout .......................................................................................21

3.3 EDNS7000 Series Hardware layout .......................................................................................22

4.0 Installation DigiOp DVR ..........................................................................................................22

4.0 Installation DigiOp DVR ..........................................................................................................23

4.1 Connections ............................................................................................................................23

4.2 Typical System connection diagram..........................................................................................24

4.3 System Installation considerations and notes:........................................................................24

5.0 Turning “ON” the DigiOp DVR ......................................................................................................26

5.1 Logging In..........................................................................................................................26

5.1.1 Users:..............................................................................................................................26

5.1.2 RemoteManager Users ...................................................................................................28

5.2 Shutting down the DigiOp DVR ........................................................................................28

DigiOp Installation Manual

Page 3 of 115

5.3 Abnormal shut down or restart procedures........................................................................29

6.0 System Operations......................................................................................................................30

On-screen keyboard........................................................................................................................30

CONFIGURE MENU – available options.........................................................................................30

Auto log off ....................................................................................................................................31

Using RemoteManager or other integrated remote applications....................................................31

Main screen............................................................................................................................................32

On-screen information: ......................................................................................................................32

On-screen control functions:..............................................................................................................34

Switching between multi-image screen and single-image screen. .....................................................36

TOOLS button .....................................................................................................................37

DVR Configuration Menu Options:.......................................................................................................37

CAMERA Tab: ......................................................................................................................................38

Video input status and selection.....................................................................................................38

Camera identification.....................................................................................................................38

Recorded View...............................................................................................................................39

Recorded video quality...................................................................................................................39

Security Screen Mode ....................................................................................................................39

Watch Mode ...................................................................................................................................40

Simple Recording Time Schedule..................................................................................................40

Motion Detection Area...................................................................................................................40

Motion Detection Sensitivity.........................................................................................................41

Motion Sensitivity “quick start” guidelines .......................................................................................42

Network Tab...........................................................................................................................................43

Enabling network connectivity...........................................................................................................43

Network Settings (EDIT)...............................................................................................................43

Network Adaptor List.....................................................................................................................44

IP Address......................................................................................................................................44

Gateway..........................................................................................................................................44

DNS................................................................................................................................................44

Additional Network Options ..............................................................................................................45

Bandwidth Throttle or Bandwidth Limit........................................................................................45

Time Synchronization....................................................................................................................45

Ensure DigiOpTS.exe runs whenever the PC is started.....................................................................46

Remote Connection Settings ..............................................................................................................47

Remote Users .................................................................................................................................47

Remote Event Notification.................................................................................................................48

Remote Connection Time Limit – refer Event Notification list.........................................................48

Auto Disconnect on no activity after: ............................................................................................48

Connection Time Limit ..................................................................................................................48

Transmission Time Limit – on Sensor activation. .............................................................................49

Sensor and Control tab ...........................................................................................................................50

Enabling the Sensors and Controls.................................................................................................50

Associating Sensors (inputs) to create an action............................................................................51

Causing a Camera(s) to record on a Sensor trigger........................................................................51

Causing a Sensor trigger to move a camera to a pre-defined PTZ position...................................52

DigiOp Installation Manual

Page 4 of 115

Causing a Sensor trigger to activate a Camera and a Control (output relay).................................52

Sensor Type....................................................................................................................................53

Sensor Alarm..................................................................................................................................53

Sensor Recording Time..................................................................................................................53

Sensor 4 input used for shut down.................................................................................................53

Video Loss Detection.....................................................................................................................54

Recording failure Alarm.................................................................................................................54

Display mode freeze after sensor...................................................................................................54

Motion Sensor................................................................................................................................55

Pre-alarm record period..................................................................................................................55

Recording Mode – Normal or Optimized ......................................................................................56

PTZ Tab..............................................................................................................................................57

Typical PTZ wiring........................................................................................................................58

Enable PTZ.....................................................................................................................................58

PTZ Protocol..................................................................................................................................59

Adding a Protocol...............................................................................................................................59

PTZ Camera Address.....................................................................................................................60

Set up procedure.................................................................................................................................61

Preset ..................................................................................................................................................62

SET.................................................................................................................................................62

LOCATION ...................................................................................................................................62

MOVE ............................................................................................................................................62

Color Tab................................................................................................................................................63

DISPLAY Tab........................................................................................................................................65

Enable/Disable Camera Recording ....................................................................................................65

Password Protected Recording...........................................................................................................66

User Management ..............................................................................................................................66

Add, Delete, Modify User Profiles.....................................................................................................67

Export and Import User Profiles ........................................................................................................68

External Monitor................................................................................................................................68

Recording Resolution.........................................................................................................................69

Frames per second ..............................................................................................................................70

Compression type...............................................................................................................................70

Video ..............................................................................................................................................70

Audio Quality.................................................................................................................................70

Retain Video Data ..............................................................................................................................71

Display Division.................................................................................................................................71

Adding a sequence .........................................................................................................................72

Modify or Clear a sequence ...........................................................................................................72

Default............................................................................................................................................72

Display Division Rotation Dwell Time..............................................................................................73

FPS/Resolution tab.................................................................................................................................74

FPS Settings per Camera (by Resolution)..........................................................................................74

Allocating FPS and Resolution to each camera .................................................................................75

Schedule tab ...........................................................................................................................................76

DigiOp Installation Manual

Page 5 of 115

To create a schedule for a camera ......................................................................................................76

To define the time on a schedule....................................................................................................77

Recording modes............................................................................................................................77

To Adjust FPS by Schedule (global)..............................................................................................78

To EDIT a defined schedule...........................................................................................................79

To DELETE a defined schedule.....................................................................................................79

To restore the list to the default setting..........................................................................................79

Defining a HOLIDAY for the Schedule ............................................................................................79

System Tab.............................................................................................................................................80

Upgrading Software ...........................................................................................................................80

Disk Full Notification.........................................................................................................................81

Send a Relay Output every 5 minutes to:.......................................................................................81

Show Warning in every 5 minutes. ................................................................................................81

System Backup ...................................................................................................................................82

Reset Configuration - Reset to Default. .............................................................................................82

Export/Import System Configuration.................................................................................................82

Email Notification..............................................................................................................................83

Select Events......................................................................................................................................83

Example: Setting up the SYSTEM EVENTS for Email Notification............................................84

Example: Setting up the SYSTEM EVENTS for Email Notification............................................85

Search.....................................................................................................................................................86

Graphical Record Log........................................................................................................................87

Scan Bar (quick search cursor line)................................................................................................87

Current Date and Time.......................................................................................................................87

Search record Date and time ..............................................................................................................88

Camera selection and camera list scrollbar........................................................................................88

Playback Controls ..............................................................................................................................88

Playback speed control.......................................................................................................................89

Screen division display modes ...........................................................................................................89

Still Image Zoom button....................................................................................................................89

Interlace/De-interlace button..............................................................................................................90

Save Searched Images Button............................................................................................................91

Video Backup Button.....................................................................................................................91

Still Image Backup (BMP or JPG).....................................................................................................92

Standard Format – MPEG Video Backup (minutes)..........................................................................92

SEARCH TOOLS menu ....................................................................................................................93

Image Adjust......................................................................................................................................93

POS (Point of sale).............................................................................................................................93

Configure............................................................................................................................................94

Add Printer .........................................................................................................................................94

Search Option.....................................................................................................................................94

Volume Control..................................................................................................................................94

Search Sensor Events.........................................................................................................................95

Print ....................................................................................................................................................95

Hour Backup ......................................................................................................................................96

Smart Search..........................................................................................................................................97

DigiOp Installation Manual

Page 6 of 115

View Search Process (during SmartSearch).......................................................................................99

Sensitivity (for SmartSearch).............................................................................................................99

SmartSearch - Search.........................................................................................................................99

Quick Search......................................................................................................................................99

Start the SmartSearch Process..........................................................................................................100

Search Next Movement ................................................................................................................100

Stop Search...................................................................................................................................100

SmartSearch Result Event List.........................................................................................................101

Zoom (for playback only) ................................................................................................................101

Post Processing of recorded images.................................................................................................102

Image enhancement option buttons ..................................................................................................103

Recorded and Preview Images .........................................................................................................104

User-Defined Enhancement Settings ...............................................................................................105

Image Post Processing Save, Print, Copy........................................................................................106

Exit Application (Exit to Windows).....................................................................................................107

Windows START menu...................................................................................................................107

Programs running (tray icons)..........................................................................................................107

NetBackup Agent .............................................................................................................................108

Hard Drive Configuration................................................................................................................109

DigiOp C:\ Drive..............................................................................................................................109

DISSTECH D:\ Drive.......................................................................................................................109

DTA E:\ Drive..................................................................................................................................110

SYS F:\ Drive...................................................................................................................................110

DISSTECH G:\ Drive.......................................................................................................................110

Unlabelled Drive ..............................................................................................................................110

Other Drives .....................................................................................................................................110

Disconnecting USB devices.............................................................................................................110

Registration details...............................................................................................................................111

MRC and License Numbers .............................................................................................................111

Software Version and Hardware Version.........................................................................................111

File naming conventions ......................................................................................................................112

Block Diagram for Alarm I/O ..............................................................................................................114

EDNS4000 I/O Connections on 15 pin DIN connector ...................................................................114

TCP/IP Port setting method using the firewall.................................................................................115

DigiOp Installation Manual

Page 7 of 115

Introduction to Digital Video Recording

Rapid economic growth and commercial sophistication in recent years has made protection

of major facilities and intellectual property a critical issue for businesses and individuals. The

demand for the centralized management of security systems and controls, as well as

protection of property from fire hazards and other natural disasters, using remote

surveillance systems is growing at an accelerating rate.

DigiOp Four Times Compression Efficiency

By using its enhanced MPEG format, file compression algorithm, the manufacturer of the

DigiOp DVR systems, General Solutions Ltd, has improved file compression efficiency over

conventional methods. DigiOp DVR’s can record and store digital images for much longer

periods of time as compared to competitive technologies.

DigiOp provides Triplex on Remote

Main functions of digital security can be classified into three categories: Image recording,

Multiplexing, and Data transmission for remote surveillance. By combining all three functions

into a single, easy to use system, DigiOp can fully meet user requirements and achieve a

more effective security solution than ever before.

Main features of DigiOp

Highly reliable maintenance-free Digital Security System

Images stored on videotapes are often distorted from prolonged use, and clear still images

are virtually impossible to obtain. But DigiOp uses a digital method to store images on the

hard drive so the still image is clear when printed. As a result of this storage method, DigiOp

can save you money in maintenance costs because you can record images over and over

again on the same drive.

Fully compatible with existing CCTV Cameras and Equipment

DigiOp is fully compatible with conventional CCTV cameras with PAL (or NTSC) signal,

which means no additional costs from having to replace an existing VCR, Multiplexer, or

other hardware.

Innovative Enhanced MPEG Compression Technology

Previously, only Motion-JPEG or MPEG were used. The Motion-JPEG has a disadvantage of

having large image files, so the image blurs when there is a lot of movement. But DigiOp

uses enhanced MPEG formats to improve the compression and image quality.

High-speed search and clear printing

High-speed search functions, recorded data manipulation, post-recording image

enhancement and SmartSearch are now a standard feature across the range of the

DigiOp Installation Manual

Page 8 of 115

commercial DigiOp DVR’s. Using a compatible printer of your choice, you can produce the

clearest of printed images.

You can use a maximum of 16 CCTV Cameras at the same time

A DigiOp system can record a maximum of 16 CCTV camera images. Because the hard disk

capacity can be easily expanded, images of multiple channels can be recorded for longer

periods.

Manipulation and alteration of recorded images are impossible as DigiOp uses

Proprietary Authentication

Conventional systems use a standardized storage method which allows access and

manipulation of stored data information.

DigiOp uses proprietary encryption to protect files from unauthorized manipulation and

alteration, assuring that video is authentic. Original recordings are encrypted so images can

only be viewed by using the DigiOp decoder in DigiOp Viewers or the DigiOp plug-in for

Windows Media Player. Using DigiOp, images can also be converted to other video formats.

Real-time image transmission through the Internet

DigiOp uses a unique, enhanced, and encrypted MPEG compression algorithm and provides

the DigiOp “RemoteManager” software to transmit encrypted real-time images through the

Local Area Network or over the Internet.

What is DigiOp RemoteManager?

DigiOp RemoteManager was developed by the General Solutions Ltd software development

team and is provided with the DigiOp DVR Series. RemoteManager is a remote surveillance

software application which allows the operator to monitor DigiOp DVR camera images from a

number of remotely located DigiOp DVR’s using TCP-IP transmission. The operator has full

access to camera and DVR set-up without having to be at the DVR location. This is great for

centralized monitoring and provides flexibility/mobility for the user on the move. Remote

Manager enables the user to view up to 24 individual camera images at a time, pick and

choose which cameras are to be displayed (and where on the screen they will be displayed),

and connect and disconnect cameras from view at will.

DigiOp Installation Manual

Page 9 of 115

Caution while installing DigiOp DVR

Please adhere to the following instructions to prevent damage, electrical fire, shock, personal

injury or equipment malfunction.

Warning

o Before connecting the power, double check the power switch (AC110V ~ 120V ->115,

AC220V~240V->230V) is switched to 230VAC.

o Do not pull on or place heavy items on the power cord.

o Connect directly to an approved electrical outlet source.

o Failure to connect properly may result in electric shock or fire hazard.

o Do not operate around water or other liquids.

o Prevent water, or other liquids, from contact with enclosure or electrical parts.

o Allow only certified technicians to install the product.

o Consult your authorized installer when the need for alterations or re-installation arises.

Improper installation may cause malfunction, electric shock, or fire hazard.

o Consult your authorized installer if special installation is required.

o “Earth” or “Ground” applies to video products equipped with a 3-wire earthing or

grounding plug having a third pin. This plug only fits into a grounding-type power

outlet. Improper grounding may cause malfunction or electric shock.

o Ensure that the camera system is properly grounded using methods defined in the

manufacturer’s specifications and instructions. This will increase protection from

voltage surges and static. Failure to ground the entire system properly may cause

malfunction, electric shock, or built-up static charges.

o Do not dismantle or re-configure the system on your own.

o Failure to have the system properly maintained and serviced may cause malfunction,

void the manufacturer warranty obligations, and increase the risk of electric shock or

fire.

o Consult your authorized dealer before servicing the unit.

o Do not place hands or foreign objects over, on, or close to the air circulation and

ventilation on the unit.

o Do not remove the power cord from the unit to power down. If you want to turn the

DigiOp DVR off, either shut down using the software or press the power button on the

front panel (refer to installation manual for options and procedures).

DigiOp Installation Manual

Page 10 of 115

Getting Started with DigiOp

DigiOp is designed for easy installation and use. This page shows how to install the DigiOp

system and explains the basic order of operation. Use this manual for clarification on any

point.

1. Connect all external cables and devices

2. Power up DVR – the DVR will auto sense all cameras and start recording (motion

detection mode).

3. Right click on the main screen, the Login button appears. Click and enter the default

Administrator password (e.g. User: admin Password: dg2ad33)

4. The TOOLS button will appear. Click TOOLS>PAUSE RECORDING.

5. A warning message will appear notifying that recording will be paused (click OK).

6. Click on the TOOLS>CONFIGURE menu option.

DigiOp Installation Manual

Page 11 of 115

Digital Video Recorder

EDNS4000 (4-8-16 camera system)

EDNS6000 (16 camera system)

EDNS7000 (16 camera system)

DigiOp Digital Video Recorder Installation,

Programming, and User Manual

DigiOp Installation Manual

Page 12 of 115

Warning

Electric Safety

To reduce risk of fire, or electrical shock, do not expose this product to liquids, rain or

moisture. Locate in a controlled environment.

Before connecting the power, double check the power switch (AC110V ~ 120V ->115,

AC220V~240V->230V) is switched to 230VAC.

Caution

Lithium Battery inside!!

There is the danger of explosion if battery is incorrectly replaced.

Replace only with the same type, or equivalent, recommended by the manufacturer.

Dispose of used batteries according to the battery manufacturer instruction.

DigiOp Installation Manual

Page 13 of 115

Cautions

C

a

u

t

i

o

n

a

n

d

W

a

r

n

i

n

g

S

i

g

n

This sign indicates that the user could be seriously or fatally injured if not

handled or installed properly.

Important Safeguards

Warning

1. Check power supply voltage setting before connecting power cord.

2. Before connecting the power, double check the power switch (AC110V ~ 120V ->115,

AC220V~240V->230V) is switched to 230VAC.

3. Use the power cord, which is supplied or recommended by the supplier. Must include

an earth connection.

4. Do not dismantle or open the equipment.

5. Do not touch the product with wet hands.

6. Equipment must be installed by a trained professional.

7. Equipment must be installed into a controlled, dry, clean and secure environment.

8. Prevent metallic, foreign or liquid substances from getting inside the product. This

includes insecticide or flammable cleaning spray.

Caution

1. Use the power cord that is supplied or recommended by the supplier.

2. Do not drop. Protect the equipment from vibration or sudden impacts.

3. Air is circulated throughout the unit. Ensure there is clean uninhibited air flow round

the equipment.

4. Ensure the temperature is maintained. Excessive internal temperature can harm the

system.

5. Ensure appropriate lightning, mains filtering and UPS are used in areas where the

power source is susceptible. Damage through lightning, power source fluctuations,

spikes, etc. is not covered by warranty.

6. Install the system in a stable and level location

DigiOp Installation Manual

Page 14 of 115

Caution about the Power

Warning

1. Before connecting the power, double check the power switch (AC110V ~ 120V ->115,

AC220V~240V->230V) is switched to 230VAC.

2. Do not turn off the power by pulling the power plug out. To turn off the power, click the

power button on the front panel. When the system stops abnormally the power button

might not work, in which case you should press and hold the power button for at least

4 seconds.

3. Do not cut off the power or move the unit when hard drives are operating. Doing so

may cause damage and loss of data.

DigiOp Installation Manual

Page 15 of 115

1. INTRODUCTION

Differences between “Real-time” Display and Normal Display

“Real-time” display units, EDNS6000 and 7000, provide the user real-time video viewing on

the DigiOp DVR server unit at the full 25fps per channel.

The normal units display the images at the rate of the recording; they could be considered

WYSIWYG – “what you see is what you get”.

The implications are:

• if using motion detection, the screen image will be the last recorded image. Minor

scene activity, or motion outside the trigger threshold, could be present but the image

may not update.

• if the unit is paused, the images on the screen may be replaced with the default

“splash screen” graphic. On the next motion detection event, the “splash screen”

graphic will be replaced with the moving video as the DVR starts recording.

2.0 DVR SYSTEM STRUCTURE AND INSTALLATION

2.1. Getting Started

Keep the packaging for transportation or storage purposes.

If any of the following items are missing or damaged, notify your supplier immediately.

The following accessories are supplied with each DigiOp Digital Video Recorder:

Digital Video Recorder

Packaging

Quick Start Guide

System Recovery CD Software

Mouse

Video/Audio Cables

Sensor/Relay adaptor (DIN connector - where applicable)

Cabinet key (where applicable)

2.2 Camera and Audio input connection leads

DigiOp DVR camera and audio inputs are either built-in type input connectors mounted

directly to the rear of the DVR, or use flexible multi-connection cables terminated with a multi

pin DIN plug and BNC connectors.

The Multi-connector cables come in a variety of formats that are typically suited to a

specific DigiOp DVR model.

Video or video/audio

connection cabling

DigiOp Installation Manual

Page 16 of 115

o When installing these cables be very careful not to bend the interconnecting pins on

the cable plug and DVR.

o Do not pull or place undue stress on the cables or connectors when installing or

disconnecting the cables or camera cables.

o Multi-connection cables MAY include both video and audio inputs. The connectors are

labelled V = Video or A = Audio.

o Do not plug video sources into audio inputs or vice versa.

DigiOp Installation Manual

Page 17 of 115

3.0 Reset and Power Buttons

Note: DigiOp DVR systems are designed to automatically start (Auto-Rebooting) soon after

power is supplied.

Reset Button: When the system is shut down abnormally, the reset button must

be pressed for at least more than one second to restart. The HDD

auto-recovery system operates, restoring the system with the last

system backup version of software. * Backup your system after

each system change.

Power Button: To shut down manually during system operation, the power button

must be pressed and held for at least one second. The monitor

displays ‘System Shutdown’ message and shuts down.

Auto-recovery: In case of abnormal operation, shut down the DVR by pressing

and holding the POWER button for at least four seconds. The

HDD auto-recovery system will restore system back to the

previous state.

Power Connection: Connect the power cord.

CAUTION

Before connecting the power, double check the power switch

(AC110V ~ 120V ->115, AC220V~240V->230V) is switched to

230VAC.

Mouse connection: Connect the mouse provided or a Windows compatible mouse.

LAN Port In case of remote monitoring, connect the LAN cable in the RJ-45

jack connector. Network has to be LAN (Local Area Network),

Internet, or exclusive line of TCP/IP based 10/100BASE-TX

Ethernet.

USB Connect exterior USB interface devices including hard drives, CDRW,

memory stick adaptors, etc. (Only approved USB CD-RW models by

manufacturer can be used).

Parallel Print Port Connect a suitable Windows compatible printer

PTZ Controller Port / RS-232C

A PTZ controller is connected directly to RS-232C. Most PTZ units

use RS422 or RS-485. Use the RS232 to RS422/485 converter

when the RS422/485 is required or when multiple PTZ units are

being used.

DigiOp Installation Manual

Page 18 of 115

PC Monitor Output Connect standard VGA type monitor

Audio Line Out Connect to a “line level” amplified device or amplified speaker.

Microphone Input Microphone input signal is synchronized to the video image of

channel 1. When the voice signal is line level, connect to “Line in”

jack.

Sensor Inputs/Relay Outputs

Where applicable, connect the sensor input cable and relay cable

(provided) into the Sensor/Relay port on the back of the unit (except

EDNS6000 – has integral connector strip). Connection to external

alarm devices can be connected directly to this cable.

Camera Inputs In most models, camera/audio inputs are using a multi-pin sub-D

connector with ‘flying’ leads and pre-terminated connectors. The

plugs are typically marked “V” for video/camera connections or “A”

for audio inputs. In the case of a 16 channel unit, two or more

cable sets are required.

Spot monitor/s An analogue CCTV monitor can be connected to the RCA Jack. The

CCTV monitor can display the same image(s) as seen on the PC

Monitor, but without the user menus. The screen mode of the spot

monitor always follows the screen mode on the PC monitor. The

EDNS6000 has a two monitor format set-up through the menu

options.

DigiOp Installation Manual

Page 19 of 115

3.1 EDNS4000 Hardware layout

*using Intel D845EP Motherboard – may change without notice

Figure 3.2.2:

Rear Panel

Figure 3.1.1:

Front panel

Microphone

(pink)

1394 Port

Line-out (green)

2x USB 2.0

Ports

System Reset

Power

DVD Writer

110VAC/230VAC

selector switch

Power

OFF/ON

Power supply

(AC mains)

PS2 Mouse

Keyboard

2x USB 2.0 Ports

Parallel Printer

Port

Audio Line

-

In

(blue)

Audio Line

-

out

(green)

Microphone

(pink)

10/100 LAN

2x USB 2.0 Ports

PC Monitor

COM Port

*pre-defined, do

not use

Sensor/Controls Port

Spot Monitor

Video In

DigiOp Installation Manual

Page 20 of 115

PTZ Controller Port / RS-232C When a RS-422/485 PTZ unit is connected directly to

the DigiOp DVR, it will connect using the EDNS-PTZ adapter (optional). This unit converts

RS232 to RS-422/485 (switchable). If a RS232 port is not available, use the

GSPORTMASTER USB to RS232 adaptor (optional).

Page is loading ...

ERNITEC Series EDNS7000 User manual

This manual is also suitable for

ERNITEC Series EDNS7000 User manual

Related papers

Other documents