CAMECHO backup cameras User manual

Dear Customer,

Thank you for choosing Camecho 4-Pin wired backup camera system. It

’

s very easy

and interesting to install, kindly follow the diagram and instructions.

Check all the package content:

1 x 7" Car Monitor

1 x Backup Camera

1 x Aviation Connector Cable 10M

1 x Remote Controller

1 x Mount Bracket

1 x Two-sided Adhesive Tap

Installation:

1.The monitor connector has 8 small pins, please align the interfaces according to the

arrow.

The red cable wired to 12V positive power source, black cable wired to ground power,

green cable wired to backup light from fuse box. Green wire is V2 reverse trigger.

2.Connect camera to monitor by video cable directly. Put the camera to any position

according to your needs.

3.The monitor have two channels, One port is AV1, Another port is AV2 prior to

reversing. You could switch V1/V2 image button on the monitor or by remote control.

4.Please mount camera on blind spot, then you could full time full angle to monitor

your vehicle rear when driving on road.

5.According installation diagram, check whether all of all parts hooked up correctly

and stably.

Any question, please feel free to contact us via your buyer email

We are 24-H online serve for you.

-------Happy Shopping