SEI walden FA9101 Assembly Instructions Manual

Brand: SEI

Model: walden FA9101

Type: Assembly Instructions Manual

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

[email protected]

www.seidal.com

"WALDEN"PETITE FIREPLACE

FA9101 - PLANTATION OAK

FA9102 – CLASSIC MAHOGANY

FA9103 - ANTIQUE WHITE

FA9104 - BLACK

Assembly Instructions

A Quantity

of 8

CAM BOLT

B Quantity

of 16

WOOD DOWEL

C Quantity

of 8

CAM LOCK

D Quantity

of 23

FLAT HEAD LONG SCREW

E Quantity

of 6

SOCKET HEXAGON SCREW

F Quantity

of 6

CAM NUT

G Quantity

of 1

SOCKET HEAD WRENCH

Quantity

of 1

FIREBOX X1PC

SOLD IN A SEPARATE CARTON.

"WALDEN"PETITE FIREPLACE

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Screws shown in actual size. Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study the

screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra

hardware with

our unit.

(1) Quantity

of 1

Middle front panel

(2) Quantity

of 1

Right front panel

(3) Quantity

of 1

Left front panel

(4) Quantity

of 1

Right side panel

(5) Quantity

of 1

Left side panel

(6) Quantity

of 1

Bottom frame

(7) Quantity

of 1

Top frame

(8) Quantity

of 2

Wood holder

(9) Quantity

of 1

Upper cross brace

(10) Quantity

of 2

Back panel (L&R)

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish . Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or

Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

"WALDEN"PETITE FIREPLACE”

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Screws shown in actual size. Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study the

screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra

hardware with

our unit.

Figure 1

INSERT 2PCS WOOD DOWEL(B)

AND 2PCS CAM BOLT(A) ONTO

PREDRILLED HOLES OF RIGHT/

LEFT FRONT PANELS (2&3). THEN

INSERT 2PCS CAM-LOCKS (C)

INTO BIG HOLES ON BACK OF

MIDDLE FRONT PANEL (1) WITH

SLOT FOR SCREWDRIVER FACING

OUTWARD. ROTATE CAM-LOCKS

CAM-BOLTS (A). AS FIGURE 1

SHOWN.

Figure 2

FIRSTLY,INSERT 4PCS WOOD

DOWEL(B) AND 6PCS CAM

BOLT(A) ONTO PREDRILLED

HOLES OF RIGHT/LEFT FRONT

PANELS (2&3), THEN INSERT

6PCS CAM-LOCKS (C) INTO BIG

HOLES ON BACK OF RIGHT AND

LEFT SIDE PANEL(4&5) WITH

SLOT FOR SCREWDRIVER FACING

OUTWARD. ROTATE CAM-LOCKS

CAM-BOLTS (A). AS FIGURE 2

SHOWN.

Figure 3

INSERT 6PCS WOOD DOWEL (B)

AND 6PCS SOCKET HEXAGON

SCREW (E) TO CORRESPONDING

HOLES OF BOTOOM FRAME (6)

AND PUT THE ASSEMBLED UNIT

THAT FINISHED AT FIGURE 2

ONTO BOTTOM PANEL

UPRIGHTLY. THEN INSERT 6PCS

CAM-NUT (F) INTO BIG HOLES ON

BACK OF RIGHT/LEFT SIDE PANEL

AND FRONT PANELS (2,3,4,5).AT

LAST ,TIGHTEN (E) WITH SOCKET

HEAD WRENCH(G) DEASIL. AS

FIGURE 3 SHOWN.

"WALDEN"PETITE FIREPLACE”

Assembly Instructions

Figure 4

PUT THE TOP FRAME(7) ONTO

ASSEMBLED FRAME

UPRIGHTLY,THEN INSERT 10PCS

FLAT HEAD LONG SCREW(D)

ONTO CORRESPONDING PLACE

TO ASSEMBLE TOP FRAME AND

PREASSEMBLED UNIT TOGETHER

AS FIGURE 4 SHOWN.

Figure 5

INSERT 4PCS WOOD DOWELS (B)

INTO PREDRILLED HOLES ON

EDGES OF LEFT AND RIGHT BACK

PANELS (10) AND FIT INTO

CORRESPONDING HOLES ON

ENDS OF UPPER CROSS BRACE

(9). AS FIGURE 5 SHOWN.

Figure 6

PUSH THE FRAME ON BACK OF

ABOVE UNIT ONTO

CORRESPONDING FRAME

TIGHTLY ； INSERT 9PCS FLAT

HEAD LONG SCREW (D)

THROUGH PREDRILLED HOLES

ON PARTS (9,10) AND TIGHTEN

IT CLOCKWISELY. AS FIGURE 6

SHOWN.

"WALDEN"PETITE FIREPLACE”

Assembly Instructions

Figure 7

INSERT FIREBOX FROM THE BACK

OF FIREPLACE. MAKE SURE

FIREBOX IS PRESSED TIGHTLY

AGAINST THE ASSEMBLED UNIT.

ATTACH WOOD HOLDERS (8) ON

THE SIDES OF FIREBOX. INSERT

4PCS FLAT HEAD LONG SCREW

(D) THROUGH PREDRILLED

HOLES ON WOOD HOLDER (8)

AND TIGHTEN INTO

CORRESPONDING HOLES ON

BACK OF LEFT AND RIGHT BACK

PANELS (10). AS FIGURE 7

SHOWN.

We'd love to hear from you! Email us photos of our products in your home at [email protected] and

we might feature it on our site or use it to model one of our inspirational photos.

"WALDEN PETITE FIREPLACE”

Assembly Instructions

Customer Service 1-800-633-5096

[email protected]

Southern Enterprises, Inc.

2915 Merrell Road

Dallas, Texas 75229

Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern

Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If

this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation

to provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.

Parts will be sent if available from SEI. The fireplace mantel will fit both gel fuel and electric firebox inserts.

Depending on the insert ordered only one insert will be included.

WARNING: positioning anything on top of your fireplace mantel poses a degree of risk especially in the case

of electronic appliances or equipment. If you elect to display a television we recommend that it be a slim

profile flat-screen and that it be positioned away from the front edge of the mantel where there is a degree

of heat generated from the firebox. You may also want to tether your flat screen tv to the wall behind it for

added safety and security. Manufacturer assumes no responsibility for items placed on top of a fireplace

mantel.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

FA9101/02/03/04

Parts Replacement Form

SEI walden FA9101 Assembly Instructions Manual

SEI walden FA9101 Assembly Instructions Manual

SEI walden FA9101 Assembly Instructions Manual

Related papers

Other documents