Step 3:
Attach Hinge (9) to back panel
(E) and top panel(A) by using
screws (6) as shown and then
tighten all screw by phillips
screwdriver(not included)
Step 4:
Open the top (A), attach
support (4) to the top (A) and
trunk base
by using 4pcs screw (6) and
phillips screwdriver to tighten
it as shown.
Attach knob (7) to Left / Right
Side Panel (B/C) by using 4pcs
screw (8) as shown.
Then put 2pcs adhesive pad (5)
on front Panel (D) as shown,
close the top (A) and leave it to
drop down slowly.
Side handles are for decorative
Side handles are for decorative Side handles are for decorative
Side handles are for decorative
purpose only. Please lift from the
purpose only. Please lift from the purpose only. Please lift from the
purpose only. Please lift from the
bottom when moving the trunk
bottom when moving the trunkbottom when moving the trunk
bottom when moving the trunk.
..
.