Wood Mantel
Assembly Instructions
1
The mantel design
and picture might
vary, but the
installation procedure
is the same.
Fireplace insert is not included.
Parts List .............
Wood mantel includes
Hearth / base
Left side panel
Right side panel
Center front panel
Mantel Top
Hardware includes
Bolts
1
2
3
4
5
6
Assembly Procedure
1
2
4
3
5
Back ViewBack View
Back View Back View
Front View
2
6. Lift the fireplace carefully
into the front of the mantel
and center it in the fireplace
opening. Do not drag the
fireplace across the base as it
may scratch the mantel base.
1. Place the mantel base ( )
on a desired location in your
room.
2. Locate the left side panel ( ).
If the left side panel is
detached, please connect
them together first ( see figure
A). Place the left side panel on
the mantel base, then using
screws through the predrilled
holes in the mounting blocks,
attach the side panel to the
mantel base. Tighten the
screws using a Phillips head
screwdriver.
3. Locate the centre panel ( ) .
Push the center panel snug to
the left side panel. Make sure
the predrilled holes are lined
up with the side panel and
center panel. Then insert
screws into the holes in the
mounting blocks. Tighten the
screws using a Phillips head
screwdriver.
4. Locate right side panel ( ).
If the right side panel is
detached, please connect
them together first ( see figure
A) Place the whole right side
panel on the mantel base.
Make sure the predrilled holes
are lined up with the side
panel and center panel. Using
screws through the predrilled
holes in the mounting blocks,
attach the side panel to the
base. Follow the same
procedure to attach the side
panel to the center panel.
5. Locate the mantel top ( )
and lay finish side up on top of
the completed mantel
assembly. Make sure that the
top fits tightly and securely.
1
2
4
3
5
Fireplace
Insert
*See Page 3 for more details on assembling for different model.
1
5
2
4
3
6
2
4
5
1
Back View
3
Figure B.............
1
5
2
4
3
6
2
4
5
1
Back View
Figure A.............
Connect them first.
/
