Bauknecht DKLB 3790 IN Program Chart

Category
Cooker hoods
Type
Program Chart
DKLB 3790
5019 100 75092
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 65 cm (Elektroplatten), 75 cm (Gas-, Öl-,
Kohlekochplatten)
INSTALLATION SHEET
Minimum height above cooker: 65 cm (electric cookers), 75 cm (gas, gas oil
or coal cookers)
FICHE D'INSTALLATION
Distance minimale par rapport à la cuisinière : 65 cm (cuisinière électrique),
75 cm (cuisinière à gaz, mazout ou charbon)
INSTALLATIESCHEMA
Min. afstand van het kooktoestel: 65 cm (elektrische kooktoestellen)
75 cm (kooktoestellen op gas, olie of kolen)
FICHA DE INSTALACIÓN
Distancia mínima desde los quemadores: 65 cm (quemadores eléctricos),
75 cm (quemadores a gas, gasóleo o carbón)
FICHA DE INSTALAÇÃO
Distância mínima do fogão: 65 cm. (fogões eléctricos), 75 cm. (fogões a gás,
óleo ou carbono)
SCHEDA INSTALLAZIONE
Distanza minima dai fuochi: 65 cm (fuochi elettrici), 75 cm (fuochi a gas,
gasolio o carbone)
ùüùü+ù$ùþ
ü$12.)12.1.)2"0120" FP02!"0120" FP0120"
.0! #02!0. #0! #.
D
GB
F
NL
E
P
I
GR
5019 100 75092
DKLB 3790
1
2
3
4
5
5
6
6
+
6
7
7
7
7
6
11
11
12
13
14
b
b
a
c
d
d+d
8
9
10
10
3
3
3
d
16
16
17
18
18
18
18
19
20
20
20
20
15
F
5019 100 75092
DKLB 3790
1.
Control panel.
2.
Grease filters.
3.
Lighting unit (halogen bulb).
4.
Telescopic flue.
CLEANING THE GREASE FILTER
Clean the grease filter once a month and also
whenever the grease filter indicator flashes
(Extraction speed indicator
2
).
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters:
a
- pull the knobs towards the lighting unit.
b
- and then downwards.
3.
After cleaning the metal grease filter repeat
the above steps in reverse to reassemble,
making sure the entire extraction surface is
covered.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Unscrew the lighting unit.
3.
Remove the burnt-out bulb and insert a new
one.
Use only 20W max halogen bulbs.
4.
Screw the lighting unit back in place.
FITTING OR RENEWING THE CARBON
FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters (
a
,
b
).
3.
Mount the carbon filter, using the two buttons
to fix it (
c
).
4.
If the carbon filter needs renewing, remove it
and fit a new one.
Renew the carbon filter once a year and also
whenever the carbon filter saturation indicator
flashes (Extraction speed indicator
3
).
5.
Remount the grease filters.
Reset filter indicator:
Press the extraction OFF
indicator until LED
2
and/or LED
3
stop flashing.
CONTROL PANEL
1.
Extraction OFF button.
2.
Extraction ON speed increase button -
1
Ö
3
Ö
1...
3.
Extraction speed indicator
1
.
4.
Extraction speed indicator
2
and grease filter
saturation indicator (when flashing).
5.
Extraction speed indicator
3
and carbon filter
saturation indicator (when flashing).
This indicator is normally deactivated: to
activate it, press buttons
2
and
7
simultaneously until the indicator starts
flashing; repeat the operation to deactivate
the signal.
6. Intensive
extraction speed indicator.
7.
Timer intensive speed button: the hood
operates at this speed for 5 minutes and then
returns to the previous settings.
This function can be cancelled by pressing
button
1
or
2
.
8.
Light OFF button.
9.
Light ON button.
3
3
2
2
3
2
2
4
1
1234567 89
C
C
a
b
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI
  • Page 1 1
  • Page 2 2
  • Page 3 3

Bauknecht DKLB 3790 IN Program Chart

Category
Cooker hoods
Type
Program Chart

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages