AKG 969
5019 100 75061
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 65 cm (Elektroplatten), 75 cm (Gas-, Öl-,
Kohlekochplatten)
INSTALLATION SHEET
Minimum height above cooker: 65 cm (electric cookers), 75 cm (gas, gas oil or
coal cookers)
FICHE D'INSTALLATION
Distance minimale par rapport à la cuisinière : 65 cm (cuisinière électrique),
75 cm (cuisinière à gaz, mazout ou charbon)
INSTALLATIESCHEMA
Min. afstand van het kooktoestel: 65 cm (elektrische kooktoestellen), 75 cm
(kooktoestellen op gas, olie of kolen)
FICHA DE INSTALACIÓN
Distancia mínima desde los quemadores: 65 cm (quemadores eléctricos),
75 cm (quemadores a gas, gasóleo o carbón)
FICHA DE INSTALAÇÃO
Distância mínima do fogão: 65 cm. (fogões eléctricos), 75 cm. (fogões a gás,
óleo ou carbono)
SCHEDA INSTALLAZIONE
Distanza minima dai fuochi: 65 cm (fuochi elettrici), 75 cm (fuochi a gas,
gasolio o carbone)
ù(ùü+ù$ùþ
ü$12.)12.1.)2"0120" FP02!"0120" FP0120"
.0! #02!0. #0! #.
D
GB
F
NL
E
P
I
GR
5019 100 75061
AKG 969
6
1
5
7
8
2
3
4
14
10
11
12
15
15
13
F
13
F
13
A
13
F
16
18
19
20
8
17
17
13F:
nur für Ausführung mit
Filterfunktion
13F:
for filter version only
13F:
uniquement pour Version filtrante
13F:
uitsluitend voor filterversie
13F:
sólo para el Modelo filtrador
13F:
apenas para a Versão Filtrante
13F:
solo per Versione filtrante
)
) . 2 032!!1.
13A:
nur für Ausführung mit
Absaugfunktion
13A:
for extractor version only
13A:
uniquement pour Version
aspirante
13A:
uitsluitend voor aanzuigversie
13A:
sólo para el Modelo aspirador
13A:
apenas para a Versão
Aspirante
13A:
solo per Versione aspirante
$
) . 2 ..!!)31"
5019 100 75061
AKG 969
1
2
3
F
C
O
O
I
1
5
2
4
3
a
2
3
4
b
1.
Control panel
2.
Grease filter
3.
Grease filter
handles
4.
Halogen lamp
5.
Telescopic flue
CLEANING THE GREASE FILTER
Clean the grease filter once a month and also
whenever the grease filter indicator flashes
(Extraction speed indicator
2
).
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters: push the handles
back (
a
), and then downwards. (
b-
).
3.
After cleaning the grease filters refit in reverse
order, making sure the entire extraction
surface is covered.
Reset grease filter saturation indicator:
Press the extraction OFF button and the light OFF
button simultaneously until the beeper sounds.
The grease filter saturation indicator will stop
flashing.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the burnt-out bulb. Use only 20W max
halogen bulbs.
3.
Fit the new bulb, ensuring that the bulb
contacts are correctly inserted in the fitting on
the hood.
FITTING OR RENEWING THE CARBON
FILTER
Renew the grease filter every 6 months and also
whenever the grease filter saturation indicator
flashes (Extractor speed indicator
3
).
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters (
a
,
b
).
3.
If not already installed, fit the caron filter at the
rear and secure with the clips (
c
) on the filter.
4.
If the carbon filter is already installed and
requires renewing, press the filter release
buttons (
c
) and pull the filter downwards.
Reset grease filter saturation indicator:
Press the extraction OFF and ON button
simultaneously until the beeper sounds. The
grease filter saturation indicator will stop flashing.
CONTROL PANEL
1.
Extraction OFF button
2.
Extraction ON speed increase button -
1
Ö
2
Ö
3
Ö
1...
3.
Extraction speed indicator
1
.
4.
Extraction speed indicator
2
and grease filter
saturation indicator (when flashing).
5.
Extraction speed indicator
3
and grease filter
saturation indicator (when flashing).
6.
Intensive extraction
speed
.
7.
Timer intensive speed button:
The hood operates at this speed for 5 minutes
and then returns to the previous settings.
This function can be cancelled by pressing
button
1
or
2
.
8.
Light OFF button.
9.
Light ON button.
123
FC
O
O
I
1 234 56 7 8 9
123
FC
O
O
I
123
FC
O
O
I
c
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI
/