Anova LBCBR-CUST Assembly Instruction

Brand: Anova

Model: LBCBR-CUST

Type: Assembly Instruction

Anova LBCBR-CUST is a custom bike rack made of stainless steel. It is designed for surface mounting and comes with all the necessary components for installation, including anchor sleeves, tamper-resistant screws, and a drill bit. The bike rack is easy to install and can be used in a variety of locations, such as schools, businesses, and parks. It is a durable and secure way to store bikes, and it can help to prevent theft.

Anova LBCBR-CUST is a custom bike rack made of stainless steel. It is designed for surface mounting and comes with all the necessary components for installation, including anchor sleeves, tamper-resistant screws, and a drill bit. The bike rack is easy to install and can be used in a variety of locations, such as schools, businesses, and parks. It is a durable and secure way to store bikes, and it can help to prevent theft.

anovafurnishings.com

888.535.5005 tel

TOOLS NEEDED:

• Rotary hammer drill

• Hammer

• 18 Volt (or stronger) drill/driver

• Marker

Installation Instructions

Modern Bike Racks

LBCBR-CUST - Arch Stainless Steel Custom Bike Rack

SURFACE MOUNT KIT COMPONENTS:

(1) Drill Bit (1) Installation Tool

(1) Tamper Resistant

Star Drive Bit

(8) Anchor Sleeves

(8) Tamper Resistant

Screws

(1) Bike Rack

INSTALLATION:

Inspect the shipping container contents for damage and to determine that all

components are present.

1.

2. Place the bike rack in the desired location and carefully mark the concrete through

the holes in the feet of the bike rack.

3. Remove bike rack and use a hammer drill and the supplied drill bit to drill 8 holes

in the marked locations. Drill the hole so that the bottom of the sleeve anchor is

2.375”+/-.0625” below the surface of the concrete.

Clean all debris out of the holes. A vacuum or a wire brush may be used. The holes

should be free of debris.

1

A A

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

SHEET

1

OF

1

DRAWN

CHECKED

QA

MFG

APPROVED

dmetz 1/23/2018

DWG NO

TITLE

SIZE

D

SCALE

REV

0.14 : 1

4.00"

4.00"

30.00"

2.00"

FOOT MOUNT

Arch Stainless Steel Custom Bike Rack

Copyright 2018 ANOVA® Made in USA. 2

Note: Please contact Customer Care at 1-866-797-1761 when ordering replacement parts.

01/31/2018

4. Place a sleeve anchor in each hole with the grooves of the anchor at the bottom (internal threads at the top).

8. Once all the anchors are set, replace the bike rack over the holes and attach to

the anchors using the supplied driver bit and the tamper resistant screws.

5. Place the wide end of the sleeve

anchor installation tool on the

anchor and pound on the narrow

end of the tool with the hammer to

drive the anchor to the bottom of

the hole.

6. Turn the sleeve anchor

installation tool around and

place the narrow end of the

installation tool into the

sleeve anchor.

7. To set the anchor, pound the installation tool

with the hammer into the sleeve anchor until it

bottoms out - the tool will depress into anchor an

additional .500”-.625” beyond its starting depth.

1
2

Anova LBCBR-CUST Assembly Instruction

Brand: Anova

Model: LBCBR-CUST

Type: Assembly Instruction

Anova LBCBR-CUST is a custom bike rack made of stainless steel. It is designed for surface mounting and comes with all the necessary components for installation, including anchor sleeves, tamper-resistant screws, and a drill bit. The bike rack is easy to install and can be used in a variety of locations, such as schools, businesses, and parks. It is a durable and secure way to store bikes, and it can help to prevent theft.

Related papers

Other documents