2. Dero
  3. Bike Hook Solo

Dero Bike Hook Solo Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Dero Bike Hook Solo Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
© 2015 Dero
www.dero.com | 1-888-337-6729
BIKE HOOK SOLO
Setbacks
68”
44”
17”
Staggered
Racks
28”
Equal Height
6”
www.dero.com | 1-888-337-6729
© 2015 Dero
Drill a hole in the base material using a 3/8”
diameter masonry bit. Drill the hole to 1” depth.
Blow the hole clean using compressed air.
Using the Drop-In setting tool, drive expander
plug towards the bottom of the anchor until
shoulder of setting tool makes contact with the
top of the anchor.
Place rack and screw anchor into wall.
Insert Drop-In anchor into hole. Tap with
hammer until flush against surface.
1
3 4
2
CONCRETE WALL INSTALLATION
BIKE HOOK SOLO
Installation Instructions – Wall Mount
www.dero.com | 1-888-337-6729
© 2015 Dero
Drill a hole in the base material using a 1/4”
diameter masonry bit.
Tap in concrete anchor.
Blow the hole clean using compressed air.
1
3
2
CONCRETE BLOCK INSTALLATION
BIKE HOOK SOLO
Installation Instructions – Wall Mount
Drill small pilot holes into wood studs. Drywall
alone is not suciently strong to support loaded
rack.
Place rack and use provided wood screws to
secure to wall.
1 2
WOOD STUD INSTALLATION
/