Hikoki FS 10SA User manual

Brand: Hikoki

Model: FS 10SA

Category: Power tools

Type: User manual

This manual is also suitable for

Orbital Sander

FS 10SA

•

FS 10SB

Handling instructions

Read through carefully and understand these instructions before use.

1 2

3 4

10 mm

5 6

280 mm

230 mm

English

ﺔﻳﺑﺭﻌﻟﺍ

Hook catches on the frame

ﺭﺎﻁﻹﺎﺑ ﻕﻠﻌﻳ ﻑﺎﻁﺧﻟﺍ

English

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂ ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools.

Unmodiﬁ ed plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂ uence of drugs, alcohol or

medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ -position before connecting

to power source and/or battery pack, picking

up or carrying the tool.

Carrying power tools with your ﬁ nger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and oﬀ .

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀ ect the

power tool's operation.

If damaged, have the power tool repaired

before use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

Use of the power tool for operations diﬀ erent from those

intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualiﬁ ed repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and inﬁ rm persons away.

When not in use, tools should be stored out of reach of

children and inﬁ rm persons.

English

SPECIFICATIONS

Voltage (by areas)*

(110V, 115V, 120V, 127V, 220V, 230V, 240V)

Power input 180W*

No-load speed 10000 /min

Sanding pad size 92 mm × 184 mm

Sanding paper size 93 mm × 228 mm

Weight (without cord) 1.4 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

NOTE

Models FS10SB and FS10SA are the same except that the former is equipped with the dust cover and adaptor as

standard accessories.

STANDARD ACCESSORIES

(1) Sanding paper .............................................................. 3

(Grain: #60, #100, #150 ...................................... 1 each)

(2) Dust cover ....................................................1 (FS10SB)

(3) Adaptor .........................................................1 (FS10SB)

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

○ Sanding paper

Grain: #60, #100, #150, (3 types)

○ Dust cover (FS10SA)

○ Adaptor (FS10SA)

Optional accessories are subject to change without

notice.

APPLICATIONS

○ Finish polishing of woodwork surfaces

○ Sanding surfaces of woodwork or sheet metal prior to

painting, etc.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements speciﬁ ed on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, inviting a serious accident.

3. Extension cord

When the work area is removed from the power source,

use an extension cord of suﬃ cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

4. Installing the sanding paper

(1) Removing the dust cover: (FS10SB)

While slightly opening the dust cover front, raise the

dust cover front as shown in Fig. 1. Disengage the dust

cover rear from the body as shown in Fig. 2. The dust

cover is removed.

(2) Mounting the sanding paper:

Insert the sanding paper while unfastening the spring

as shown in Fig. 3. Align the sanding paper in parallel

with the pad and pull it tight.

Should the sanding paper be loosely mounted, the

ﬁ nishing will become uneven or the sanding paper may

be damaged.

(to facilitate mounting the sanding paper)

After engaging the one side of sanding paper, fold the

other side 10 mm from the edge as shown in Fig. 4.

Fold the sanding paper again 10 mm from the folded

edge.

(3) Installing the dust cover: (FS10SB)

Position the dust cover as shown in Fig. 5. Engage the

dust cover rear as shown in Fig. 6. And depress the

dust cover front downward.

(4) Installing the cleaner: (FS10SB)

Connect the suction hose to the dust cover hole. (If the

suction hose cannot be connected, attach the supplied

adaptor and ﬁ x with tape).

PRACTICAL OPERATING PROCEDURES

CAUTION

Never apply water or grinding ﬂ uid when sanding. This

could result in electrical shock.

1. Switching the sander ON and OFF

By pulling the trigger and pushing the stopper, the

switch will remain ON even when the trigger is released,

promoting continuous, eﬃ cient operation. By pulling

the trigger again, the stopper is released and the switch

is turned OFF.

CAUTION

Never turn the power switch ON when the sander is

contacting the surface to be sanded. This is necessary

to preclude damage to the material. The same applies

when switching the power OFF.

2. How to hold the orbital sander

While gripping the knob with one hand and the handle

with the other, lightly press the sander against the

surface to be sanded so that the sanding paper

uniformly contacts the surface. DO NOT apply

excessive pressure to the sander while sanding.

Excessive pressure may cause overload of the motor,

reduced service life of the sanding paper, and lower

sanding or polishing eﬃ ciency. Also, while sanding or

polishing, never cover the ventilation port on the upper

motor housing. This could cause overheating and

subsequent damage to the tool.

3. How to move the orbital sander

For optimum operating eﬃ ciency, alternately move the

sander forward and backward at a constant speed and

balance.

4. After installing new sanding paper

Movement of the sander may tend to become unsteady

after new sanding paper has been installed, because of

the new, coarse grain of the paper. This can be avoided

by slightly tilting the sander forward or backward during

sanding or polishing. Sander movement will become

steady as the sanding paper surface becomes properly

abraded.

English

MAINTENANCE AND INSPECTION

1. Inspecting the sanding paper

Since use of worn-out sanding paper will degrade

eﬃ ciency and cause possible damage to the pad,

replace the sanding paper as soon as excessive

abrasion is noted.

2. Inspecting the mounting screws:

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws

be loose, retighten them immediately. Failure to do so

could result in serious hazard.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the power

tool. Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

4. Servicing

Consult an authorized Service Center in the event of

power tool failure.

NOTE

Due to HITACHI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

ﺔﻳﺑﺭﻌﻟﺍ

ﺹﺣﻔﻟﺍﻭ ﺔﻧﺎﻳﺻﻟﺍ

ﺓﺭﻔﻧﺻﻟﺍ ﺔﻗﺭﻭ ﺹﺣﻓ

ﺏﺑﺳﻳ ﺩﻗﻭ ﺓءﺎﻔﻛﻟﺍ ﻝﻳﻠﻘﺗ ﻰﻟﺇ ﻙﻟﺎﻬﺗﻣ ﺓﺭﻔﻧﺻ ﻕﺭﻭ ﻡﺍﺩﺧﺗﺳﺍ ﻱﺩﺅﻳﺳ

ﺙﻭﺩﺣ ﺔﻅﺣﻼﻣ ﺩﺭﺟﻣﺑ ﺓﺭﻔﻧﺻﻟﺍ ﺔﻗﺭﻭ ﻝﺩﺑﺗﺳﺍ ﺍﺫﻟ ،ﺓﺩﺎﺳﻭﻠﻟ ﺭﺭﺿ

.ﺩﺋﺍﺯ ﻝﻛﺂﺗ

:ﺕﻳﺑﺛﺗﻟﺍ ﺭﻳﻣﺎﺳﻣ ﺹﺣﻓ

ﺎﻬﻁﺑﺭ ﻡﺎﻛﺣﺇ ﻥﻣ ﺩﻛﺄﺗﻟﺍﻭ ﺕﻳﺑﺛﺗﻟﺍ ﺭﻳﻣﺎﺳﻣ ﺔﻓﺎﻛﻟ ﻱﺭﻭﺩﻟﺍ ﺹﺣﻔﻟﺎﺑ ﻡﻗ

.ﺭﻭﻔﻟﺍ ﻰﻠﻋ ﺎﻬﻁﺑﺭ ﻡﺎﻛﺣﺈﺑ ﻡﻗ ،ﺭﻳﻣﺎﺳﻣ ﺔﻳﺃ ﻙﻓ ﺔﻟﺎﺣ ﻲﻓ .ﺢﻳﺣﺻ ﻝﻛﺷﺑ

.ﺭﻁﺎﺧﻣ ﻰﻟﺇ ﻙﻟﺫﺑ ﻡﺎﻳﻘﻟﺍ ﻲﻓ ﻝﺷﻔﻟﺍ ﺽﺭﻌﻳ ﺩﻘﻓ

ﻙﺭﺣﻣﻟﺍ ﺔﻧﺎﻳﺻ

.ﺔﻗﺎﻁﻟﺍ ﺓﺍﺩﺃ ﻥﻣ "ﻁﺳﻭﻷﺍ ءﺯﺟﻟﺍ" ﻭﻫ ﻙﺭﺣﻣﻟﺍ ﺓﺩﺣﻭ ﻑﻠﻣ

.ءﺎﻣﻟﺍ ﻭﺃ ﺕﻳﺯﻟﺍ ﺔﻁﺳﺍﻭﺑ ﻪﻠﻠﺑ ﻭﺃ/ﻭ ﻑﻠﻣﻟﺍ ﻑﻠﺗ ﻡﺩﻋ ﻥﻣ ﺭﺍﺭﻣﺗﺳﺎﺑ ﺩﻛﺎﺗ

ﺔﻧﺎﻳﺻﻟﺍ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺍﺩﻷﺍ ﻝﻁﻌﺗ ﺔﻟﺎﺣ ﻲﻓ ﺩﻣﺗﻌﻣ ﺔﻣﺩﺧ ﺯﻛﺭﻣ ﺭﺷﺗﺳﺍ

ﺔﻅﺣﻼﻣ

ﺕﺎﻔﺻﺍﻭﻣﻟﺍ ﺭﻳﻐﺗﺗ ،ﺭﻣﺗﺳﻣﻟﺍ ﺭﻳﻭﻁﺗﻟﺍﻭ ﺙﺣﺑﻠﻟ

HITACHI

ﺞﻣﺎﻧﺭﺑﻟ ﺎ

ﻌﺑﺗ

.ﻕﺑﺳﻣ ﻡﻼﻋﺇ ﻥﻭﺩ ﺎﻧﻫ ﺓﺭﻭﻛﺫﻣﻟﺍ

ﺔﻳﺑﺭﻌﻟﺍ

ﺕﺎﻔﺻﺍﻭﻣﻟﺍ

*(ﺔﻘﻁﻧﻣﻟﺍ ﺏﺳﺣ) ﻲﺑﺭﻬﻛﻟﺍ ﺩﻬﺟﻟﺍ (ﺕﻟﻭﻓ

240

،ﺕﻟﻭﻓ

230

،ﺕﻟﻭﻓ

220

،ﺕﻟﻭﻓ

127

،ﺕﻟﻭﻓ

120

،ﺕﻟﻭﻓ

115

،ﺕﻟﻭﻓ

110

)

ﺔﻗﺎﻁﻟﺍ ﻝﺎﺧﺩﺇ*ﺕﺍﻭ

180

ﻝﻣﺣ ﻥﻭﺩﺑ ﺔﻋﺭﺳﻟﺍﺔﻘﻳﻗﺩ/

10000

ﺓﺭﻔﻧﺻﻟﺍ ﺓﺩﺎﺳﻭ ﻡﺟﺣﻡﻣ

184 ×

ﺓﺭﻔﻧﺻﻟﺍ ﺔﻗﺭﻭ ﻡﺟﺣﻡﻣ

228 ×

(ﻙﻠﺳﻟﺍ ﻥﻭﺩﺑ) ﻥﺯﻭﻟﺍﻡﺟﻛ

1.4

ﺔﻘﻁﻧﻣﻟﺍ ﺏﺳﺣ ﺭﻳﻳﻐﺗﻠﻟ ﺔﺿﺭ

ﻋ ﺎﻬﻧﺃ ﺙﻳﺣ ﺞﺗﻧﻣﻟﺍ ﻰﻠﻋ ﺓﺩﻭﺟﻭﻣﻟﺍ ﻡﺳﻻﺍ ﺔﺣﻭﻟ ﺹﺣﻓ ﻥﻣ ﺩﻛﺄﺗ

ﺔﻅﺣﻼﻣ

.ﺔﻳﺳﺎﻳﻗ ﺕﺎﻘﺣﻠﻣﻛ ﺊﻳﺎﻬﻣﻭ ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻐﺑ ﺯﻬﺟﻣ ﻕﺑﺎﺳﻟﺍ ﻥﺃ ءﺎﻧﺛﺗﺳﺎﺑ ﻥﺎﻬﺑﺎﺷﺗﻣ ﺎﻣﻫ FS10SA ﻭ FS10SB ﺯﺭﻁﻟﺍ

ﺔﻳﺳﺎﻳﻗ ﺕﺎﻘﺣﻠﻣ

.......................................................... ﺓﺭﻔﻧﺻﻟﺍ ﺔﻗﺭﻭ

(1)

(ﻉﻭﻧ ﻝﻛﻟ ﺓﺩﺣﺍﻭ .............................. #150 ،#100 ،#60 :ﺔﺑﺣﻟﺍ)

(FS10SB)

............................................. ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻏ

(2)

(FS10SB)

................................................... ﺊﻳﺎﻬﻣﻟﺍ

(3)

.ﺭﺎﻁﺧﺇ ﻥﻭﺩ ﺔﻳﺳﺎﻳﻘﻟﺍ ﺕﺎﻘﻠﺣﻣﻟﺍ ﺭﻳﻳﻐﺗ ﻥﻛﻣﻳ

(ﺔﻠﺻﻔﻧﻣ ﻉﺎﺑ

ﺗ) ﺔﻳﺭﺎﻳﺗﺧﺍ ﺕﺎﻘﺣﻠﻣ

ﺓﺭﻔﻧﺻﻟﺍ ﺔﻗﺭﻭ

○

(ﻉﺍﻭﻧﺃ 3) ،#150 ،#100 ،#60 :ﺔﺑﺣﻟﺍ

(FS10SA) ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻏ

○

(FS10SA) ﺊﻳﺎﻬﻣﻟﺍ

○

.ﺭﺎﻁﺧﺇ ﻥﻭﺩ ﺔﻳﺭﺎﻳﺗﺧﻻﺍ ﺕﺎﻘﻠﺣﻣﻟﺍ ﺭﻳﻳﻐﺗ ﻥﻛﻣﻳ

ﺕﺎﻘﻳﺑﻁﺗ

ﺔﻳﺑﺷﺧﻟﺍ ﺢﻁﺳﻸﻟ ﻲﺋﺎﻬﻧﻟﺍ ﻊﻳﻣﻠﺗﻟﺍ

○

.ﻙﻟﺫ ﻰﻟﺇ ﺎﻣﻭ ﺎﻬﺋﻼﻁ ﻝﺑﻗ ﺔﻳﻧﺩﻌﻣﻟﺍ ﺡﺍﻭﻟﻷﺍ ﻭﺃ ﺔﻳﺑﺷﺧﻟﺍ ﺢﻁﺳﻷﺍ ﺓﺭﻔﻧﺻ

○

ﻝﻳﻐﺷﺗﻟﺍ ﻝﺑﻗ

ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ

ﺕﺎﺑﻠﻁﺗﻣﻟ ﻕﺑﺎﻁﻣ ﻪﻣﺍﺩﺧﺗﺳﺍ ﻡﺗﻳﺳ ﻱﺫﻟﺍ ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ ﻥﺃ ﻥﻣ ﺩﻛﺄﺗ

.ﺞﺗﻧﻣﻟﺍ ﻰﻠﻋ ﺓﺩﻭﺟﻭﻣﻟﺍ ﻡﺳﻻﺍ ﺔﺣﻭﻟ ﻰﻠﻋ ﺓﺩﺩﺣﻣﻟﺍ ﺔﻗﺎﻁﻟﺍ

ﺔﻗﺎﻁﻟﺍ ﺡﺎﺗﻔﻣ

ﺱﺑﺎﻘﻟﺍ ﻝﻳﺻﻭﺗ ﺔﻟﺎﺣ ﻲﻓ .ﻑﺎﻘﻳﺇ ﻊﺿﻭﻟﺍ ﻰﻠﻋ ﺔﻗﺎﻁﻟﺍ ﺡﺎﺗﻔﻣ ﻥﺃ ﻥﻣ ﺩﻛﺄﺗ

ﺓﺍﺩﺃ ﻝﻳﻐﺷﺗ ﻡﺗﻳﺳﻓ ،ﻝﻳﻐﺷﺗ ﻊﺿﻭﻟﺍ ﻰﻠﻋ ﺔﻗﺎﻁﻟﺍ ﺡﺎﺗﻔﻣ ﻥﺎﻛﻭ ﺱﺑﻘﻣﻟﺎﺑ

.ﺭﻳﻁﺧ ﺙﺩﺎﺣ ﻉﻭﻗﻭ ﻰﻟﺇ ﻱﺩﺅﻳ ﺩﻗ ﺎﻣﻣ ،ﺭﻭﻔﻟﺍ ﻰﻠﻋ ﺔﻗﺎﻁﻟﺍ

ﻲﻓﺎﺿﻹﺍ ﻝﻳﺻﻭﺗﻟﺍ ﻙﻠﺳ

ﻝﻳﺻﻭﺗ ﻙﻠﺳ ﻡﺩﺧﺗﺳﺍ ،ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ ﻥﻣ ﻝﻣﻌﻟﺍ ﺔﻘﻁﻧﻣ ﺔﻟﺍﺯﺇ ﺩﻧﻋ

ﻝﻳﺻﻭﺗﻟﺍ ﻙﻠﺳ ﻝﻅﻳ ﻥﺃ ﺏﺟﻳ .ﺔﻧﻧﻘﻣ ﺔﻌﺳﻭ

ﻑﺎﻛ ﻙﻣﺳ ﻭﺫ ﻲﻓﺎﺿﺇ

.ﻉﺎﻁﺗﺳﻣﻟﺍ ﺭﺩﻘﺑ ﺍ

ﺭﻳﺻﻗ ﻲﻓﺎﺿﻹﺍ

ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﺏﻳﻛﺭﺗ

(FS10SB)

:ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻏ ﺔﻟﺍﺯﺇ (1)

ءﺎﻁﻐﻟ ﻲﻣﺎﻣﻷﺍ ءﺯﺟﻟﺍ ﻊﻓﺭﺍ ،ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻐﻟ ﻲﻣﺎﻣﻷﺍ ءﺯﺟﻟﺍ ﺢﺗﻓ ﺩﻧﻋ

ءﺎﻁﻏ ﻥﻣ ﻲﻔﻠﺧﻟﺍ ءﺯﺟﻟﺍ ﻙﻔﺑ ﻡﻗ

.1 ﻝﻛﺷﻟﺍ ﻲﻓ ﺢﺿﻭﻣ ﻭﻫ ﺎﻣﻛ ﺭﺎﺑﻐﻟﺍ

ءﺎﻁﻏ ﺔﻟﺍﺯﺇ ﻡﺗﺗ

.2 ﻝﻛﺷﻟﺍ ﻲﻓ ﺢﺿﻭﻣ ﻭﻫ ﺎﻣﻛ ﻝﻛﻳﻬﻟﺍ ﻥﻣ ﺭﺎﺑﻐﻟﺍ

.ﺭﺎﺑﻐﻟﺍ

:ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﺏﻳﻛﺭﺗ

(2)

ﻲﻓ ﺢﺿﻭﻣ ﻭﻫ ﺎﻣﻛ ﻥﺍﺭﻭﺩﻟﺍ ﺩﻭﻣﻋ ﻙﻓ ﺩﻧﻋ ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﻝﺎﺧﺩﺈﺑ ﻡﻗ

ﺎﻬﺑﺣﺳﺍﻭ ﺓﺩﺎﺳﻭﻟﺍ ﻊﻣ ﻱﺯﺍﻭﺗﻟﺎﺑ ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﺓﺍﺫﺎﺣﻣﺑ ﻡﻗ .3 ﻝﻛﺷﻟﺍ

.ﻡﺎﻛﺣﺈﺑ

ﻝﻘﺻﻟﺍ ﺢﺑﺻﻳ ﻑﻭﺳﻓ ،ﻲﺧﺗﺭﻣ ﻝﻛﺷﺑ ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﺏﻳﻛﺭﺗ ﻡﺗ ﺍﺫﺇ

.ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﻑﻠﺗﻳ ﺩﻗ ﻭﺃ ﻱﻭﺗﺳﻣ ﺭﻳﻏ

(ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﺏﻳﻛﺭﺗ ﻝﻳﻬﺳﺗﻟ)

ﻡﻣ 10 ﺭﺧﻵﺍ ﺏﻧﺎﺟﻟﺍ ﻲﻁﺑ ﻡﻗ ،ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﺏﻧﺍﻭﺟ ﺩﺣﺃ ﺏﻳﻛﺭﺗ ﺩﻌﺑ

.4 ﻝﻛﺷﻟﺍ ﻲﻓ ﺢﺿﻭﻣ ﻭﻫ ﺎﻣﻛ ﺔﻓﺎﺣﻟﺍ ﻥﻣ

.ﺔﻳﻭﻁﻣﻟﺍ ﺔﻓﺎﺣﻟﺍ ﻥﻣ ﻡﻣ 10 ﻯﺭﺧﺃ ﺓﺭﻣ ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﻲﻁﺑ ﻡﻗ

(FS10SB) :ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻏ ﺏﻳﻛﺭﺗ (3)

ﻲﻔﻠﺧﻟﺍ ءﺯﺟﻟﺍ ﻊﺿ .5 ﻝﻛﺷﻟﺍ ﻲﻓ ﺢﺿﻭﻣ ﻭﻫ ﺎﻣﻛ ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻏ ﻊﺿ

ءﺯﺟﻟﺍ ﻰﻠﻋ ﻁﻐﺿﺍ .6 ﻝﻛﺷﻟﺍ ﻲﻓ ﺢﺿﻭﻣ ﻭﻫ ﺎﻣﻛ ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻏ ﻥﻣ

.ﻝﻔﺳﻷ ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻐﻟ ﻲﻣﺎﻣﻷﺍ

(FS10SB) :ﻑﻅﻧﻣﻟﺍ ﺏﻳﻛﺭﺗ (4)

ﻝﻳﺻﻭﺗ ﻡﺗﻳ ﻡﻟ ﺍﺫﺇ) .ﺭﺎﺑﻐﻟﺍ ءﺎﻁﻏ ﺔﺣﺗﻔﻟ ﺹﻣﻟﺍ ﻡﻭﻁﺭﺧ ﻝﻳﺻﻭﺗﺑ ﻡﻗ

.(ﻁﻳﺭﺷﻟﺍ ﺕﻳﺑﺛﺗﺑ ﻡﻗﻭ ﺩﻭﺯﻣﻟﺍ ﺊﻳﺎﻬﻣﻟﺍ ﻁﺑﺭﺑ ﻡﻗ ،ﺹﻣﻟﺍ ﻡﻭﻁﺭﺧ

ﺔﻳﻠﻣﻌﻟﺍ ﻝﻳﻐﺷﺗﻟﺍ ﺕﺍﻭﻁﺧ

ﻪﻳﺑﻧﺗ

.ﻝﻘﺻﻟﺍ ءﺎﻧﺛﺃ ﺏﺑﺣﺗﻟﺍ ﻝﺋﺎﺳ ﻭﺃ ءﺎﻣﻟﺍ ﺍ

ﺩﺑﺃ ﻡﺩﺧﺗﺳﺗ ﻻ

.ﺔﻳﺑﺭﻬﻛ ﺔﻣﺩﺻ ﻲﻓ ﻙﻟﺫ ﺏﺑﺳﺗﻳ ﺩﻗ

ﺓﺭﻔﻧﺻﻟﺍ ﺯﺎﻬﺟ ﻑﺎﻘﻳﺇﻭ ﻝﻳﻐﺷﺗ

ﻝﻳﻐﺷﺗﻟﺍ ﻊﺿﻭ ﻲﻓ ﺡﺎﺗﻔﻣﻟﺍ ﻝﻅﻳ ،ﻑﺎﻘﻳﻹﺍ ﺡﺎﺗﻔﻣ ﻁﻐﺿﻭ ﺡﺍﺩﻘﻣﻟﺍ ﺏﺣﺳﺑ

ﺏﺣﺳﺑ .ءﻑﻛﻭ ﺭﻣﺗﺳﻣ ﻝﻳﻐﺷﺗ ﺍ

ﺭﻓﻭ

ﻣ ،ﺡﺍﺩﻘﻣﻟﺍ ﺭﻳﺭﺣﺗ ﺩﻧﻋ ﻰﺗﺣ

ﻊﺿﻭ ﻰﻟﺇ ﺡﺎﺗﻔﻣﻟﺍ ﻝﻭﺣﺗﻳﻭ ﻑﺎﻘﻳﻹﺍ ﺡﺎﺗﻔﻣ ﺭﺭﺣﺗﻳ ،ﻯﺭﺧﺃ ﺓﺭﻣ ﺡﺍﺩﻘﻣﻟﺍ

.ﻑﺎﻘﻳﻹﺍ

ﻪﻳﺑﻧﺗ

ﺍﺫﻫ ﻪﻠﻘﺻ ﺩﺍﺭﻳ ﻱﺫﻟﺍ ﺢﻁﺳﻟﺎﺑ

ﻼﺻﺗﻣ ﻥﺎﻛ ﺍﺫﺇ ﺓﺭﻔﻧﺻﻟﺍ ﺯﺎﻬﺟ ﻝﻐﺷ

ﺗ ﻻ

ﺩﻧﻋ ﻝﺛﻣﻟﺍ ﻕﺑﻁ

ﻳ ،ﺎﻬﻠﻘﺻ ﺩﺍﺭﻣﻟﺍ ﺓﺩﺎﻣﻟﺍ ﺭﺭﺿﺗ ﻊﻧﻣﻟ ﻲﺳﺎﺳﺃ ءﺍﺭﺟﺇ

.ﺯﺎﻬﺟﻟﺍ ﻕﻼﻏﺇ

ﺔﻳﺭﺍﺩﻣﻟﺍ ﺓﺭﻔﻧﺻﻟﺍ ﻝﻣﺣﺗ ﻑﻳﻛ

ﻕﻓﺭﺑ ﻁﻐﺿﺍ ،ﻯﺭﺧﻷﺎﺑ ﻝﻣﺎﻌﺗﻟﺍﻭ ﺓﺩﺣﺍﻭ ﺩﻳﺑ ﺽﺑﻘﻣﻟﺎﺑ ﻙﺎﺳﻣﻹﺍ ﺩﻧﻋ

ﻕﺭﻭ ﺱﻣﻼﻳ ﻙﻟﺫﻟ ﻪﺗﺭﻔﻧﺻ ﺩﺍﺭﻣﻟﺍ ﺢﻁﺳﻠﻟ ﺔﻠﺑﺎﻘﻣﻟﺍ ﺓﺭﻔﻧﺻﻟﺍ ﻰﻠﻋ

ﻡﺍﺩﺧﺗﺳﺍ ﺩﻧﻋ ﺩﺋﺍﺯﻟﺍ ﻁﻐﺿﻟﺍ ﻡﺩﺧﺗﺳﺗ ﻻ .ﻡﺎﻅﺗﻧﺎﺑ ﺢﻁﺳﻟﺍ ﺓﺭﻔﻧﺻﻟﺍ

،ﻙﺭﺣﻣﻟﺍ ﻰﻠﻋ ﺩﺋﺍﺯ ﻝﻣﺣ ﺩﻭﺟﻭ ﻲﻓ ﺩﺋﺍﺯﻟﺍ ﻁﻐﺿﻟﺍ ﺏﺑﺳﺗﻳ ﺩﻗ .ﺓﺭﻔﻧﺻﻟﺍ

ﻭﺃ ﺓﺭﻔﻧﺻﻟﺍ ﺓءﺎﻔﻛ ﺽﻔﺧﻭ ،ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭﻟ ﺔﻣﺩﺧﻟﺍ ﺭﻣﻋ ﻥﻣ ﻝﻠﻘﻳﻭ

ﺔﻳﻭﻬﺗﻟﺍ ﺫﻔﻧﻣ ﻁﻐﺗ ﻻ ،ﻝﻘﺻﻟﺍ ﻭﺃ ﺓﺭﻔﻧﺻﻟﺍ ﺩﻧﻋ ،ﺎ

ﺿﻳﺃ .ﻊﻳﻣﻠﺗﻟﺍ ﺓءﺎﻔﻛ

ﺔﻧﻭﺧﺳﻟﺍ ﻲﻓ ﻙﻟﺫ ﺏﺑﺳﺗﻳ ﺩﻗ .ﻙﺭﺣﻣﻟﺍ ﺕﻳﺑﻣ ﻥﻣ ﻱﻭﻠﻌﻟﺍ ءﺯﺟﻟﺍ ﻰﻠﻋ

.ﺓﺍﺩﻸﻟ ﻊﺑﺎﺗ ﻑﻠﺗﻭ ﺓﺩﺋﺍﺯﻟﺍ

ﺔﻳﺭﺍﺩﻣﻟﺍ ﺓﺭﻔﻧﺻﻟﺍ ﺯﺎﻬﺟ ﻙﻳﺭﺣﺗ ﺔﻳﻔﻳﻛ

ﺔﻋﺭﺳﺑ ﻑﻠﺧﻟﺍﻭ ﻡﺎﻣﻸﻟ ﺏﻭﺎﻧﺗﻟﺎﺑ ﺓﺭﻔﻧﺻﻟﺍ ﺯﺎﻬﺟ ﻙﺭﺣ ﺓءﺎﻔﻛ ﻝﺿﻓﻷ

.ﻥﻳﺗﺑﺎﺛ ﻥﺍﺯﺗﺍﻭ

ﺩﻳﺩﺟ ﺓﺭﻔﻧﺻ ﻕﺭﻭ ﺏﻳﻛﺭﺗ ﺩﻌﺑ

ﻕﺭﻭ ﺏﻳﻛﺭﺗ ﻡﺗﻳ ﻥﺃ ﺩﻌﺑ ﺓﺭﻘﺗﺳﻣ ﺭﻳﻏ ﺓﺭﻔﻧﺻﻟﺍ ﺔﻧﻳﻛﺎﻣ ﺔﻛﺭﺣ ﺢﺑﺻﺗ ﺩﻗ

.ﻪﻧﻣ ﺔﻧﺷﺧﻟﺍ ءﺍﺯﺟﻷﺍ ﻭﺃ ﺩﻳﺩﺟﻟﺍ ﻕﺭﻭﻟﺍ ﺏﺑﺳﺑ ﻙﻟﺫﻭ ،ﺩﻳﺩﺟ ﺓﺭﻔﻧﺻ

ﻭﺃ ﻡﺎﻣﻷﺍ ﻰﻟﺇ

ﻼﻳﻠﻗ ﺓﺭﻔﻧﺻﻟﺍ ﺔﻧﻳﻛﺎﻣ ﺔﻟﺎﻣﺇ ﻝﻼﺧ ﻥﻣ ﺍﺫﻫ ﺏﻧﺟﺗ ﻥﻛﻣﻳ

ﺓﺭﻔﻧﺻﻟﺍ ﺔﻧﻳﻛﺎﻣ ﺔﻛﺭﺣ ﺢﺑﺻﺗ ﻑﻭﺳ .ﺏﻳﺫﻬﺗﻟﺍ ﻭﺃ ﺓﺭﻔﻧﺻﻟﺍ ءﺎﻧﺛﺃ ﻑﻠﺧﻟﺍ

.ﻲﻐﺑﻧﻳ ﺎﻣﻛ ﺔﻁﻭﺷﻘﻣ ﺓﺭﻔﻧﺻﻟﺍ ﻕﺭﻭ ﺢﻁﺳﺃ ﺢﺑﺻﺗ ﺎﻣﺩﻧﻋ ﺓﺭﻘﺗﺳﻣ

ﺔﻳﺑﺭﻌﻟﺍ

ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﺔﻣﻼﺳﺑ ﺔﺻﺎﺧﻟﺍ ﺔﻣﺎﻌﻟﺍ ﺕﺍﺭﻳﺫﺣﺗﻟﺍ

ﺭﻳﺫﺣﺗ

.ﺕﺎﻣﻳﻠﻌﺗﻟﺍ ﺔﻓﺎﻛﻭ ﺔﻣﻼﺳﻟﺍ ﺕﺍﺭﻳﺫﺣﺗ ﺔﻓﺎﻛ ﺓءﺍﺭﻘﺑ ﻡﻗ

ﺔﻣﺩﺻ ﻲﻓ ﻩﺎﻧﺩﺃ ﺓﺩﺭﺳﻣﻟﺍ ﺕﺎﻣﻳﻠﻌﺗﻟﺍﻭ ﺕﺍﺭﻳﺫﺣﺗﻟﺍ ﻉﺎﺑﺗﺍ ﻲﻓ ﻝﺷﻔﻟﺍ ﺏﺑﺳﺗﻳ ﺩﻗ

.ﺔﺑﺎﺻﺇ ﻭﺃ/ﻭ ،ﻕﻳﺭﺣ ﻭﺃ ﺔﻳﺋﺎﺑﺭﻬﻛ

ﻼﺑﻘﺗﺳﻣ ﺎﻬﻳﻟﺇ ﻉﻭﺟﺭﻠﻟ ﺕﺎﻣﻳﻠﻌﺗﻟﺍﻭ ﺕﺍﺭﻳﺫﺣﺗﻟﺍ ﺔﻓﺎﻛ ﻅﻔﺣﺍ

ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻰﻟﺇ ﺕﺍﺭﻳﺫﺣﺗﻟﺍ ﻲﻓ "ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ" ﺢﻠﻁﺻﻣ ﺭﻳﺷﻳ

ﺓﺩﻌﻟﺍ ﻭﺃ ﻙﺑ ﺔﺻﺎﺧﻟﺍ ﺔﻳﺳﻳﺋﺭﻟﺍ ﻝﻳﻐﺷﺗﻟﺍ ﺕﻼﺻﻭﻣ ﻝﻣﻌﺗ ﻲﺗﻟﺍ (ﺔﻳﻛﻠﺳﻟﺍ)

.ﺔﻳﺭﺎﻁﺑﻟﺎﺑ ﻝﻣﻌﺗ ﻲﺗﻟﺍ (ﺔﻳﻛﻠﺳﻼﻟﺍ) ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ

ﻝﻣﻌﻟﺍ ﺔﻘﻁﻧﻣ ﺔﻣﻼﺳ (

.ﻙﻠﻐﺷ ﻥﺎﻛﻣ ﺓءﺎﺿﺇ ﻥﺳﺣﻭ ﺔﻓﺎﻅﻧ ﻰﻠﻋ ﻅﻓﺎﺣ (ﺃ

ﺏﺑﺳﺗﺗ ﺓءﺎﺿﻣ ﺭﻳﻐﻟﺍ ﻝﻣﻌﻟﺍ ﺕﻻﺎﺟﻣﻭ ﻝﻣﻌﻟﺍ ﻥﺎﻛﻣ ﻲﻓ ﻰﺿﻭﻔﻟﺎﻓ

.ﺙﺩﺍﻭﺣ ﻉﻭﻗﻭ ﻲﻓ

ﺩﻭﺟﻭ ﻲﻓ ﻱﺃ ﺔﻳﺭﺎﺟﻔﻧﺍ ءﺍﻭﺟﺃ ﻲﻓ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻝﻳﻐﺷﺗﺑ ﻡﻘﺗ ﻻ (ﺏ

.ﺭﺎﺑﻏ ﻭﺃ ﻝﺎﻌﺗﺷﻼﻟ ﺔﻠﺑﺎﻗ ﺕﺍﺯﺎﻏ ﻭﺃ ﻝﺋﺍﻭﺳ

.ﺔﻧﺧﺩﻷﺍ ﺭﺎﺑﻏ ﻝﺎﻌﺷﺇ ﻰﻠﻋ ﻝﻣﻌﺗ ﺓﺭﺍﺭﺷ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﺙﺩﺣﺗ

ﻝﺎﻔﻁﻷﺍ ﻝﻭﺎﻧﺗﻣ ﻥﻋ ﺓﺩﻳﻌﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻥﻭﻛﺗ ﻥﺃ ﻰﻠﻋ ﻅﻓﺎﺣ (ﺕ

.ﻙﺑ ﻥﻳﻁﻳﺣﻣﻟﺍ ﻭﺃ

ﻙﺩﻘﻓ ﻰﻟﺇ ﻱﺩﺅﺗ ﻥﺃ ﻥﻛﻣﻣﻟﺍ ﻥﻣ ﺕﻳﺗﺷﺗﻟﺍ ﻝﺎﻛﺷﺃ ﻥﻣ ﻝﻛﺷ ﻱﺃ

.ﺓﺭﻁﻳﺳﻟﺍ

ﺔﻳﺑﺭﻬﻛﻟﺍ ﺕﺎﻣﺩﺻﻟﺍ ﻥﻣ ﺔﻳﺎﻗﻭﻟﺍ (

ﻱﺄﺑ ﺱﺑﺎﻘﻟﺍ ﻝﻳﺩﻌﺗ ﺭﻅﺣﻳ ،ءﺎﺑﺭﻬﻛﻟﺍ ﺫﻔﻧﻣﺑ ﺱﺑﺎﻘﻟﺍ ﻝﻳﺻﻭﺗ ﺏﺟﻳ (ﺃ

.ﺔﻘﻳﺭﻁ

.ﺔﻳﺿﺭﻷﺍ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻊﻣ ﺊﻳﺎﻬﻣ ﺱﺑﺎﻗ ﻱﺃ ﻡﺩﺧﺗﺳﺗ ﻻ

ﺭﻁﺧ ﻥﻣ ﺔﻣﺋﻼﻣﻟﺍ ﺱﺑﺎﻘﻣﻟﺍﻭ ﺎﻫﺭﻳﻳﻐﺗ ﻡﺗﻳ ﻡﻟ ﻲﺗﻟﺍ ﺱﺑﺍﻭﻘﻟﺍ ﺽﻔﺧﺗ

. ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺕﺎﻣﺩﺻﻟﺍ ﺙﻭﺩﺣ

ﺏﻳﺑﺎﻧﻷﺍ ﻝﺛﻣ ﺔﻳﺿﺭﻷﺍ ﺢﻁﺳﻷﺍ ﻊﻣ ﻱﺩﺳﺟﻟﺍ ﺱﻣﻼﺗﻟﺍ ﺏﻧﺟﺗ (ﺏ

.ﺩﻗﺍﻭﻣﻟﺍﻭ ﺕﺎﺟﻼﺛﻟﺍﻭ ﺔﻳﺭﺍﺭﺣﻟﺍ ﺕﻻﺩﺎﺑﻣﻟﺍﻭ

ﻙﺎﻧﻫ ﺔﻳﺿﺭﻷﺍ ﺢﻁﺳﻷﺍ ﻙﻠﺗ ﻥﻣ ﻱﻷ ﻙﻣﺳﺟ ﺔﺳﻣﻼﻣ ﺔﻟﺎﺣ ﻲﻓ

.ﺔﻳﺑﺭﻬﻛ ﺔﻣﺩﺻﻟ ﻙﺿﺭﻌﺗﻟ ﺓﺭﻭﻁﺧ

.ﺔﺑﻭﻁﺭﻟﺍ ﻭﺃ ﺭﻁﻣﻠﻟ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﺽﺭﻌﺗ ﻻ (ﺕ

ﺓﺩﻌﻟﺍ ﻝﺧﺍﺩ ﻰﻟﺇ ءﺎﻣﻟﺍ ﺏﺭﺳﺗ ﻥﺇ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺕﺎﻣﺩﺻﻟﺍ ﺭﻁﺧ ﺩﺍﺩﺯﻳ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ

ﻭﺃ ﻝﻣﺣﻟ

ﺎﻘﻠﻁﻣ ﻪﻠﻣﻌﺗﺳﺗ ﻻ ،(ﻙﻠﺳﻟﺍ) ﻝﺑﺎﻛﻟﺍ ﻝﺎﻣﻌﺗﺳﺍ ءﻲﺳﺗ ﻻ (ﺙ

.ﺱﺑﻘﻣﻟﺍ ﻥﻣ ﺱﺑﺎﻘﻟﺍ ﺏﺣﺳﻟ ﻭﺃ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻊﻓﺩ ﻭﺃ ﺩﺷ

ﻑﺍﻭﺣﻟﺍ ﻭﺃ ﺕﻳﺯﻟﺍ ﻭﺃ ﺓﺭﺍﺭﺣﻟﺍ ﺭﺩﺎﺻﻣ ﻥﻋ

ﺍﺩﻳﻌﺑ ﻪﻳﻠﻋ ﻅﻓﺎﺣﻭ

.ﺔﻛﺭﺣﺗﻣﻟﺍ ﺯﺎﻬﺟﻟﺍ ءﺍﺯﺟﺃ ﻭﺃ ﺓﺩﺎﺣﻟﺍ

ﺕﺎﻣﺩﺻﻟﺍ ﺭﻁﺧ ﻥﻣ ﺔﻛﺑﺎﺷﺗﻣﻟﺍ ﻭﺃ ﺔﻔﻟﺎﺗﻟﺍ (ﻙﻼﺳﻷﺍ) ﺕﻼﺑﺎﻛﻟﺍ ﺩﻳﺯﺗ

.ﺔﻳﺑﺭﻬﻛﻟﺍ

ﻙﻠﺳ ﻡﺍﺩﺧﺗﺳﺎﺑ ﺢﺻﻧﻳ ،ﺝﺭﺎﺧﻟﺎﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﺔﻟﺎﺣ ﻲﻓ (ﺝ

.ﻲﺟﺭﺎﺧﻟﺍ ﻝﺎﻣﻌﺗﺳﻻﺍ ﻊﻣ ﺏﺳﺎﻧﺗﻳ (ﻝﺑﺎﻛ)

ﻥﻣ ﻝﻳﻠﻘﺗﻠﻟ ﻲﺟﺭﺎﺧﻟﺍ ﻝﺎﻣﻌﺗﺳﻻﺍ ﻊﻣ ﺏﺳﺎﻧﻣ ﻙﻠﺳ ﻡﺍﺩﺧﺗﺳﺎﺑ ﻡﻗ

.ﺔﻳﺑﺭﻬﻛ ﺔﻣﺩﺻﻟ ﺽﺭﻌﺗﻟﺍ ﺓﺭﻭﻁﺧ

ﺭﻔﻣ ﻻ ﺭﻣﺃ ﺏﻁﺭ ﻥﺎﻛﻣ ﻲﻓ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﻥﻭﻛﻳ ﺎﻣﺩﻧﻋ (ﺡ

(RCD)

ﻲﻘﺑﺗﻣﻟﺍ ﻲﺑﺭﻬﻛﻟﺍ ﺭﺎﻳﺗﻠﻟ ﻲﻣﺣﻣﻟﺍ ﺩﻭﺯﻣﻟﺍ ﻡﺩﺧﺗﺳﺎﻓ ،ﻪﻧﻣ

ﺕﺎﻣﺩﺻﺑ ﺔﺑﺎﺻﻹﺍ ﺭﻁﺎﺧﻣ ﻝﻳﻠﻘﺗ ﻰﻠﻋ RCD ﻡﺍﺩﺧﺗﺳﺍ ﻝﻣﻌﻳ

.ﺔﻳﺑﺭﻬﻛ

ﺔﻳﺻﺧﺷﻟﺍ ﺔﻣﻼﺳﻟﺍ (

ﺓﺩﻌﻟﺍ ﺔﻁﺳﺍﻭﺑ ﻝﻣﻌﻟﺎﺑ ﻡﻗﻭ ﻪﻠﻌﻔﺗ ﺎﻣ ﻰﻟﺇ ﻪﺑﺗﻧﺃﻭ ﺎ

ﻅﻘﻳ ﻥﻛ (ﺃ

ﻙﺭﻭﻌﺷ ﺔﻟﺎﺣ ﻲﻓ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺗ ﻻ .ﻝﻘﻌﺗﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ

ﺩﺍﻭﻣ ﻭﺃ ﺔﻳﻭﺩﺃ ﻭﺃ ﺓﺭﺩﺧﻣ ﺩﺍﻭﻣ ﺭﻳﺛﺄﺗ ﺕﺣﺗ ﺕﻧﻛ ﺍﺫﺇ ﻭﺃ ﺏﻌﺗﻟﺎﺑ

.ﺔﻳﻟﻭﺣﻛ

ﻱﺩﺅﻳ ﺩﻗ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺍﺩﺧﺗﺳﺇ ﺩﻧﻋ ﺓﺩﺣﺍﻭ ﺔﻅﺣﻠﻟ ﻩﺎﺑﺗﻧﻹﺍ ﻡﺩﻋ

.ﺓﺭﻳﻁﺧ ﺔﺑﺎﺻﺇ ﻰﻟﺇ

.ﻥﻳﻌﻠﻟ ﻲﻗﺍﻭﻟﺍ ﻉﺎﻧﻘﻟﺍ ءﺍﺩﺗﺭﺎﺑ ﺎ

ﻣﺋﺍﺩ ﻡﻗ .ﻥﺎﻣﻷﺍ ﺕﺍﻭﺩﺃ ﻡﺩﺧﺗﺳﺍ (ﺏ

ﺔﻳﺫﺣﺃ ﻭﺃ ﺭﺎﺑﻐﻟﺍ ﻥﻣ ﻲﻗﺍﻭﻟﺍ ﻉﺎﻧﻘﻟﺍ ﻝﺛﻣ ﺔﻳﺎﻣﺣﻟﺍ ﺕﺍﻭﺩﺃ ﻝﻣﻌﺗﺳ

ﻊﻣﺳﻟﺍ ﺔﻳﺎﻣﺣ ﺓﺯﻬﺟﺃ ﻭﺃ ﺔﺑﻠﺻ ﺔﻌﺑﻗ ﻭﺃ ﻕﻻﺯﻧﻼﻟ ﺓﺩﺎﺿﻣﻟﺍ ﻥﺎﻣﻷﺍ

ﺕﻻﺎﻣﺗﺣﺍ ﻝﻳﻠﻘﺗ ﻰﻠﻋ ﺔﻧﻳﻌﻣ ﻑﻭﺭﻅ ﻲﻓ ﺎﻬﻣﺍﺩﺧﺗﺳﺍ ﻡﺗﻳ ﻲﺗﻟﺍﻭ

.ﺔﻳﺻﺧﺷ ﺕﺎﺑﺎﺻﻹ ﺽﺭﻌﺗﻟﺍ

ﻊﺿﻭﻟﺍ ﻲﻓ ﺡﺎﺗﻔﻣﻟﺍ ﻥﺃ ﻥﻣ ﺩﻛﺄﺗ .ﺩﻭﺻﻘﻣﻟﺍ ﺭﻳﻏ ﻝﻳﻐﺷﺗﻟﺍ ﻊﻧﻣ (ﺕ

ﺔﻣﺯﺣ ﻭﺃ/ﻭ ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣﺑ ﻝﻳﺻﻭﺗﻟﺍ ﻝﺑﻗ ﻝﻳﻐﺷﺗﻟﺍ ﻑﺎﻘﻳﺇ

.ﺓﺍﺩﻷﺍ ﻝﻣﺣ ﻭﺃ ﻁﺎﻘﺗﻟﻻﺍﻭ ،ﺔﻳﺭﺎﻁﺑﻟﺍ

ﻭﺃ ﺡﺎﺗﻔﻣﻟﺍ ﻲﻓ ﻙﻌﺑﺻﺇ ﺩﻭﺟﻭ ﻊﻣ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻝﻣﺣ ﻱﺩﺅﻳ

ﻝﻳﻐﺷﺗﻟﺍ ﻊﺿﻭ ﻲﻓ ﺡﺎﺗﻔﻣﻟﺍ ﺎﻬﻳﻓ ﻥﻭﻛﻳ ﻲﺗﻟﺍ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ

.ﺙﺩﺍﻭﺣ ﻉﻭﻗﻭ ﻝﺎﻣﺗﺣﺍ ﻰﻟﺇ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﻝﺑﻗ ﻁﺑﺭﻟﺍ ﺡﺎﺗﻔﻣ ﻭﺃ ﻁﺑﺿﻟﺍ ﺩﺩﻋ ﻉﺯﻧﺍ (ﺙ

ﻥﻣ ﻙﺭﺣﺗﻣﻟﺍ ءﺯﺟﻟﺍ ﺭﺎﺳﻳ ﻰﻠﻋ ﻁﺑﺿ ﺡﺎﺗﻔﻣ ﻭﺃ ﻁﺑﺭ ﺡﺎﺗﻔﻣ ﺩﻭﺟﻭ

.ﺔﻳﺻﺧﺷ ﺔﺑﺎﺻﺇ ﺙﻭﺩﺣ ﻰﻟﺇ ﻱﺩﺅﻳ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ

ﻥﻳﺑﻭ ﻙﻧﻳﺑ ﺔﺑﺳﺎﻧﻣ ﺔﻓﺎﺳﻣ ﻙﺭﺗﺍ ،ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻥﻣ ﺏﺭﺗﻘﺗ ﻻ (ﺝ

.ﺕﺎﻗﻭﻷﺍ ﻊﻳﻣﺟ ﻲﻓ ﻙﻧﺯﺍﻭﺗ ﻰﻠﻋ ﻅﻓﺎﺣﻭ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ

ﻲﻓ ﻝﺿﻓﺃ ﻝﻛﺷﺑ ﺯﺎﻬﺟﻟﺍ ﻰﻠﻋ ﺓﺭﻁﻳﺳﻟﺍ ﻥﻣ ﻙﻟﺫ ﻙﻟ ﺢﻣﺳﻳﺳ

.ﺔﻌﻗﻭﺗﻣﻟﺍ ﺭﻳﻏ ﻑﻗﺍﻭﻣﻟﺍ

ﻑﺍﺭﻁﺃ ﺎﻬﺑ ﻭﺃ ﺔﺿﺎﻔﺿﻓ ﺱﺑﻼﻣ ﻱﺩﺗﺭﺗ ﻻ ،ﺔﺑﺳﺎﻧﻣ ﺱﺑﻼﻣ ءﺍﺩﺗﺭﺎﺑ ﻡﻗ (ﺡ

ﻲﺗﻟﺍ ﺱﺑﻼﻣﻟﺍﻭ ﻙﺭﻌﺷ ﺩﺎﻌﺑﺇ ﻰﻠﻋ

ﺎﻣﺋﺍﺩ ﻅﻓﺎﺣﻭ ،ﻲﻠﺣ ﻭﺃ ﺔﺑﺋﺎﺳ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻥﻣ ﺔﻛﺭﺣﺗﻣﻟﺍ ءﺍﺯﺟﻷﺍ ﻥﻋ

ﺍﺩﻳﻌﺑ ﺯﺎﻔﻘﻟﺍﻭ ﺎﻬﻳﺩﺗﺭﺗ

ﻲﻠﺣﻟﺍ ﻭﺃ ﻑﺍﺭﻁﺃ ﺎﻬﺑ ﻲﺗﻟﺍ ﻭﺃ ﺔﺿﺎﻔﺿﻔﻟﺍ ﺱﺑﻼﻣﻟﺍ ﻙﺑﺷﺎﺗﺗ ﺩﻗ

.ﺏﺎﻘﺛﻣﻠﻟ ﺔﻛﺭﺣﺗﻣﻟﺍ ءﺍﺯﺟﻷﺎﺑ ﻝﻳﻭﻁﻟﺍ ﺭﻌﺷﻟﺍﻭﺃ

ﻡﺗﻳﻭ ﺔﻠﺻﺗﻣ ﻥﻣ ﺩﻛﺄﺗﻓ .ﺭﺎﺑﻐﻟﺍ ﻊﻳﻣﺟﺗﻭ ﻁﻔﺷ ﺯﺎﻬﺟ ﺏﻳﻛﺭﺗ ﺯﺎﺟ ﻥﺇ (ﺥ

.ﻡﻳﻠﺳ ﻝﻛﺷﺑ ﺎﻬﻣﺍﺩﺧﺗﺳﺍ

.ﺭﺎﺑﻐﻟﺍ ﻥﻋ ﺔﻣﺟﺎﻧﻟﺍ ﺭﻁﺎﺧﻣﻟﺍ ﻝﻳﻠﻘﺗ ﻰﻟﺇ ﺭﺎﺑﻐﻟﺍ ﻊﻳﻣﺟﺗ ﻡﺍﺩﺧﺗﺳﺍ ﻱﺩﺅﻳ ﺩﻗ

:ﺎﻬﺑ ﺔﻳﺎﻧﻌﻟﺍﻭ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺍﺩﺧﺗﺳﺍ ﺔﻘﻳﺭﻁ (

ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺍﻭ ،ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺍﺩﺧﺗﺳﺍ ﻲﻓ ﻁﺭﻔﺗ ﻻ (ﺃ

.ﻪﺑ ﻡﻭﻘﺗ ﻱﺫﻟﺍ ﻝﻣﻌﻠﻟ ﺔﺑﺳﺎﻧﻣﻟﺍ

ﻙﺩﻋﺎﺳﻳ ﺍﺫﻫ ﻥﺈﻓ ﻙﻟﺫﻟ ﺔﺻﺻﺧﻣﻟﺍ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻙﻣﺍﺩﺧﺗﺳﺍ ﺩﻧﻋ

ﻡﺗ ﻲﺗﻟﺍ ﺔﻣﻬﻣﻠﻟ

ﺎﻌﺑﺗ

ﺎﻧﻣﺃ ﺭﺛﻛﺃﻭ ﻝﺿﻓﺃ ﺔﺟﻳﺗﻧ ﻰﻠﻋ ﻝﻭﺻﺣﻟﺍ ﻰﻠﻋ

.ﺎﻬﻟ ﺏﺎﻘﺛﻣﻟﺍ ﻡﻳﻣﺻﺗ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺗ ﻻ ﻝﻣﻌﻟﺍ ﻥﻋ ﻝﻳﻐﺷﺗﻟﺍ ﺡﺎﺗﻔﻣ ﻝﻁﻌﺗ ﺔﻟﺎﺣ ﻲﻓ (ﺏ

ﺎﻬﺑ ﺹﺎﺧﻟﺍ ﻝﻳﻐﺷﺗﻟﺍ ﺡﺎﺗﻔﻣ ﻲﻓ ﻡﻛﺣﺗﻟﺍ ﻥﻛﻣﻳ ﻻ ﺔﻳﺋﺎﺑﺭﻬﻛ ﺓﺩﻋ ﻱﺃ

.ﺡﺎﺗﻔﻣﻟﺍ ﺍﺫﻫ ﺡﻼﺻﺇ ﺏﺟﻳﻭ ﺎﻬﻣﺍﺩﺧﺗﺳﺍ ﺩﻧﻋ

ﺍﺭﻁﺧ ﻝﻛﺷﺗ ﺎﻬﻧﺈﻓ

ﻥﻣ ﺔﻳﺭﺎﻁﺑﻟﺍ ﺔﻣﺯﺣ ﻭﺃ/ﻭ ﺔﻗﺎﻁﻟﺍ ﺭﺩﺻﻣ ﻥﻣ ﺱﺑﺎﻘﻟﺍ ﻝﺻﻔﺑ ﻡﻗ (ﺕ

ﻭﺃ ﺕﺎﻘﺣﻠﻣﻟﺍ ﺭﻳﻳﻐﺗ ﻭﺃ ﺕﻼﻳﺩﻌﺗ ﻱﺃ ﻝﻣﻋ ﻝﺑﻗ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ

.ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻥﻳﺯﺧﺗ

ﺭﻳﻏ ﻝﻛﺷﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻝﻳﻐﺷﺗ ﻩﺫﻫ ﻁﺎﻳﺗﺣﻻﺍ ﺕﺍءﺍﺭﺟﺇ ﻊﻧﻣﺗ

.ﺩﻭﺻﻘﻣ

ﻝﻭﺎﻧﺗﻣ ﻥﻋ

ﺃﺩﻳﻌﺑ ﺔﻣﺩﺧﺗﺳﻣ ﺭﻳﻐﻟﺍ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﻥﻳﺯﺧﺗﺑ ﻡﻗ (ﺙ

ﻝﻳﻐﺷﺗ ﻥﻋ ﺓﺭﻛﻓ ﻪﻳﺩﻟ ﺱﻳﻟ ﺹﺧﺷ ﻱﻷ ﺢﻣﺳﺗ ﻻﻭ ﻝﺎﻔﻁﻷﺍ

.ﺎﻬﻠﻳﻐﺷﺗ ﻭﺃ ﺕﺍﻭﺩﻷﺍ ﻩﺫﻫ ﻥﻣ ﺏﺍﺭﺗﻗﻻﺎﺑ ﺏﺎﻘﺛﻣﻟﺍ

ﻥﻳﺑﺭﺩﻣ ﺭﻳﻐﻟﺍ ﺹﺎﺧﺷﻷﺍ ﻱﺩﻳﺃ ﻲﻓ ﺓﺭﻭﻁﺧ ﻝﺛﻣﺗ ﻝﻳﻐﺷﺗﻟﺍ ﺕﺍﻭﺩﺃ

.ﺎﻬﻳﻠﻋ

ﺔﻳﺣﺎﻧ ﻥﻣ

ﺍﺩﻳﺟ ﺎﻬﺻﺣﻔﺑ ﻡﻗ ،ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺩﺩﻌﻟﺍ ﺔﻣﻼﺳ ﻥﻣ ﺩﻛﺄﺗ (ﺝ

ءﺯﺟ ﻱﺃ ﻲﻓ ﺭﺳﻛ ﻱﺃ ﺩﻭﺟﻭ ﻭﺃ ﺔﻛﺭﺣﺗﻣﻟﺍ ءﺍﺯﺟﻷﺍ ﻁﺑﺍﺭﺗ ﻯﺩﻣ

.ﺎﻬﻠﻳﻐﺷﺗ ﻰﻠﻋ ﺭﺛﺅﻳ ﺎﻣﺑ ﺎﻬﺋﺍﺯﺟﺃ ﻥﻣ

ﻝﺑﻗ ﺎﻬﺣﻼﺻﺇ ﺏﺟﻳ ﻝﻳﻐﺷﺗﻟﺍ ﺕﺍﻭﺩﺄﺑ ﻑﻠﺗ ﺙﻭﺩﺣ ﺔﻟﺎﺣ ﻲﻓ

.ﻡﺍﺩﺧﺗﺳﻻﺍ

ﺭﻳﻏ ﻝﻛﺷﺑ ﺔﻧﺎﻳﺻﻟﺍ ﺔﻳﻠﻣﻌﺑ ﻡﺎﻳﻘﻟﺍ ﻭﺃ ﻝﻳﻐﺷﺗﻟﺍ ﺕﺍﻭﺩﺃ ﺔﻧﺎﻳﺻ ﻡﺩﻋ

.ﺙﺩﺍﻭﺣﻟﺍ ﻥﻣ ﺭﻳﺛﻛﻟﺍ ﺙﻭﺩﺣ ﻰﻟﺇ ﻱﺩﺅﻳ ﺢﻳﺣﺻ

ﺔﻔﻳﻅﻧﻭ ﺓﺩﺎﺣ ﻊﻳﻁﻘﺗﻟﺍ ﺕﺍﻭﺩﺃ ﻰﻠﻋ ﻅﺎﻔﺣﻟﺍ ﻰﺟﺭﻳ (ﺡ

ﻝﻬﺳﻳ ﺙﻳﺣﺑ ﻑﺍﻭﺣﻟﺍ ﺓﺩﺎﺣ ﻊﻳﻁﻘﺗﻟﺍ ﺕﺍﻭﺩﺃ ﻰﻠﻋ ﻅﺎﻔﺣﻟﺍ ﻰﺟﺭﻳ

.ﺎﻬﻳﻓ ﻡﻛﺣﺗﻟﺍ

ﻙﻟﺫ ﺭﻳﻏﻭ ﺓﺩﻌﻟﺍ ءﺍﺯﺟﺃﻭ ،ﺕﺎﻘﺣﻠﻣﻟﺍﻭ ،ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻡﺩﺧﺗﺳﺍ (ﺥ

ﻑﻭﺭﻅ ﺭﺎﺑﺗﻋﻻﺍ ﻲﻓ ﻊﺿﻭﻟﺍ ﻊﻣ ،ﺕﺎﻣﻳﻠﻌﺗﻟﺍ ﻩﺫﻫ ﻊﻣ ﻕﻓﺍﻭﺗﻳ ﺎﻣﻳﻓ

.ﺎﻬﻘﻳﻘﺣﺗ ﺏﻭﻠﻁﻣﻟﺍ ﻝﺎﻣﻋﻷﺍﻭ ﻝﻣﻌﻟﺍ

ﻰﻟﺇ ﺎﻬﻟ ﺔﺻﺻﺧﻣﻟﺍ ﺭﻳﻏ ﺽﺍﺭﻏﻸﻟ ﺔﻗﺎﻁﻟﺍ ﺓﺍﺩﺃ ﻡﺩﺧﺗﺳﺍ ﻱﺩﺅﻳ ﺩﻗ

.ﺭﻳﻁﺧ ﻑﻗﻭﻣ ﺩﻭﺟﻭ

ﺔﻣﺩﺧﻟﺍ (

ﻁﻘﻓﻭ ﻥﻳﺻﺻﺧﺗﻣﻟﺍ ﻝﺑﻗ ﻥﻣ ﻁﻘﻓ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﻙﺗﺩﻋ ﺢﻳﻠﺻﺗﺑ ﺢﻣﺳﺍ (ﺃ

. ﻁﻘﻓ ﺔﻳﻠﺻﻷﺍ ﺭﺎﻳﻐﻟﺍ ﻊﻁﻗ ﻝﺎﻣﻌﺗﺳﺈﺑ

.ﺯﺎﻬﺟﻟﺍ ﻥﺎﻣﺃ ﻰﻠﻋ ﺔﻅﻓﺎﺣﻣﻟﺍ ﻙﻟﺫ ﻥﻣﺅﻳ

ﺕﺎﻁﺎﻳﺗﺣﻻﺍ

.ﻥﺳﻟﺍ ﺭﺎﺑﻛﻭ ﻝﺎﻔﻁﻷﺍ ﻝﻭﺎﻧﺗﻣ ﻥﻋ

ﺍﺩﻳﻌﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻊﺿﻭ ﻰﺟﺭﻳ

ﻥﻋ ﺓﺩﻳﻌﺑ ﺔﻳﺋﺎﺑﺭﻬﻛﻟﺍ ﺓﺩﻌﻟﺍ ﻰﻠﻋ ﻅﺎﻔﺣﻟﺍ ﺏﺟﻳ ﻡﺍﺩﺧﺗﺳﻻﺍ ﻡﺩﻋ ﺔﻟﺎﺣ ﻲﻓ

.ﻥﺳﻟﺍ ﺭﺎﺑﻛﻭ ﻝﺎﻔﻁﻷﺍ ﻝﻭﺎﻧﺗﻣ

FS10SB The exploded assembly drawing should be used only for authorized service center.

.ﺩﻣﺗﻌﻣﻟﺍ ﺔﻣﺩﺧﻟﺍ ﺯﻛﺭﻣ ﻊﻣ ﻁﻘﻓ FS10SB ﺝﺫﻭﻣﻧﻠﻟ ﻲﺣﻳﺿﻭﺗﻟﺍ ﻲﻌﻳﻣﺟﺗﻟﺍ ﻡﺳﺭﻟﺍ ﻡﺍﺩﺧﺗﺳﺍ ﻡﺗﻳ ﻥﺃ ﺏﺟﻳ

Item

No.

Part Name

1B Housing (A), (B) Set

2 Tapping Screw (W/Washer) D4 × 20

3 Name Plate

4 Leg Holder

5 Leg

6 Fan

7 Machine Screw M4 × 10

8 Spring Washer M4

9 Paper Holder

10 Support

11 Nut M4

12 Base Ass’y

13 Pad

14 Tube (D)

15 Stator

16 Carbon Brush

17 Brush Holder

18 Armature

19 Washer (D)

20 Ball Bearing (608VVMC2EPS2L)

21 Connector (50091)

22 Metal or Ball Bearing

23 Noise Suppressor

24 Switch

25 Cord

27A HITACHI Label

28 Tapping Screw (W/Flange) D4 × 16

29 Cord Clip

30 Tube (D)

31 Cord Armor

33 Earth Terminal

501A Sanding Paper G60

502A Sanding Paper G100

503A Sanding Paper G150

504A Dust Cover

505 Adapter

Parts are subject to possible modiﬁ cation

without notice due to improvements.

The drawing and the list are parts structural

drawing and parts list of model FS10SB.

For model FS10SA refer to the drawing and

the list.

ﻝﻳﺩﻌﺗﻟﺍ ﺔﻳﻧﺎﻛﻣﻹ ﺔﺿﺭﻋ ءﺍﺯﺟﻷﺍ ﻥﺈﻓ ﺭﻳﻭﻁﺗﻠﻟ

ﺎﻘﻓﻭ

.ﺭﺎﻁﺧﺇ ﻥﻭﺩ

ﺔﻣﺋﺎﻗﻭ ءﺍﺯﺟﻸﻟ ﻲﻠﻛﻳﻫ ﻡﺳﺭ ﻲﻫ ﺔﻣﺋﺎﻘﻟﺍﻭ ﻡﺳﺭﻟﺍ

.FS10SB ﺝﺫﻭﻣﻧﻠﻟ ءﺍﺯﺟﻸﻟ

.ﺔﻣﺋﺎﻘﻟﺍﻭ ﻡﺳﺭﻟﺍ ﻰﻟﺇ ﻊﺟﺭﺍ FS10SA ﺝﺫﻭﻣﻧﻠﻟ ﺔﺑﺳﻧﻟﺎﺑ

Hitachi Koki Co., Ltd.

509

Code No. 99479651 G

Printed in China

Hikoki FS 10SA User manual

Brand: Hikoki

Model: FS 10SA

Category: Power tools

Type: User manual

This manual is also suitable for

Download PDF

report

Hikoki FS 10SA User manual

This manual is also suitable for

Hikoki FS 10SA User manual

Related papers

Other documents