Esatto ECGG604W, ECGG905W Gas on Glass Cooktop User manual

Brand: Esatto

Model: ECGG604W, ECGG905W Gas on Glass Cooktop

Type: User manual

This manual is also suitable for

ECGG604W

Version

V1.4 0922

Everything you need

for your Gs on Glss

Cooktop is in this

User Mnul

Model/s

ECGG604W

ECGG905W

User Manual

Welcome

Congrtultions on purchsing your new Gs Cooktop. The Estto brnd is

proudly distributed within Austrli by Residenti Group Pty Ltd.

Plese refer to the wrrnty crd t the rer of this mnul for informtion

regrding your product’s prts nd lbour wrrnty, or visit us online t:

www.residenti.group

At Residenti Group, we re customer obsessed nd our Support Tem re

there to ensure you get the most out of your pplince. Should you wnt to

lern more bout your new gs cooktop, it's fetures or importntly tking

cre of the pplince, our Support Tem re here to help.

You cn use our online Support Centre t nytime by visiting:

http://support.residentigroup.com.u

Or you cn contct us vi phone by diling: 1300 11 HELP (4357).

It is importnt tht you red through the following use nd cre mnul

thoroughly to fmilirise yourself with the instlltion nd opertion

requirements of your pplince to ensure optimum performnce.

Agin, thnk you for choosing n Estto pplince nd we look forwrd

to being of service to you.

Kind Regrds,

The Residenti Tem

Residenti roup

—

Head Office

165 Brkly Avenue

Burnley, Victori

Austrli 3121

—

ACN

600 546 656

—

Online

residenti.group

www.estto.house

@estto.house

—

Postage

PO Box 5177

Burnley, Victori

Austrli 3121

—

Telephone

1300 11 4357

www.esatto.house

esatto.house

Page 2

Welcome

Page 4

Safety Instructions

Page 6

Product Overview

Page 8

Before First Use

Pge 9

Using Your

Cooktop

Pge 10

Burners

Page 11

Cleaning  Care

Page 12

Troubleshooting

Pge 13

Technicl Dt

Pge 14

Instlltion

Instructions

Pge 16

Gs Connection

Pge 19

LPG Conversion

Page 20

Electrical

Connection

Page 21

Testing Appliance

Operation

Pge 23

Purchse Detils

Pge 24

Wrrnty

Contents

User Manual

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP

FOR FUTURE REFERENCE

Read this manual thoroughly before rst use,

even if you are familiar with this type of product.

The safety precautions enclosed herein reduce

the risk of re, electric shock and injury when

correctly adhered to. Make sure you understand

all instructions and warnings.

Keep the user manual in a safe place for future

reference, along with the completed warranty

card and purchase receipt. If you sell or transfer

ownership of this product, pass on these

instructions to the new owner.

Always follow basic safety precautions and

accident prevention measures when using an

electrical appliance. The following statements you

will see in this booklet have these meanings:

WARNING: Indicating information concerning

your personal safety.

CAUTION: Indicating information on how

to avoid damaging the appliance, benchtop

or cabinetry.

IMPORTANT: Indicating tips and information

about use of the appliance.

USAGE CONDITIONS AND RESTRICTIONS

• Domestic use only: This appliance is intended

for indoor household use only. It is not intended

for commercial, industrial or outdoor use. It is

not intended for use in a recreational vehicle.

• Purpose: Do not use this appliance for anything

other than its intended purpose. Other uses are

not recommended and may cause re, electric

shock or personal injury.

• Attachments: The use of attachments is not

recommended by the appliance manufacturer

and distributor as they may be hazardous.

• Improper use: Damage due to improper use,

or repairs made by unqualied personnel will

void your warranty. We assume no liability

for any eventual damages caused by misuse

of the product or noncompliance with these

instructions.

BEFORE USING YOUR APPLIANCE

This manual explains the proper use of your new

Esatto cooktop. Please read this manual carefully

before using the product. This manual should

be kept in a safe place for handy reference. This

rangehood is a domestic appliance which has been

manufactured and tested to comply with Australian

and New Zealand Standard AS/NZS 5263.

This cooktop must only be installed in accordance

with the instructions provided. Incorrect

installation may cause harm to persons, damage

property and void the product’s warranty.

Read the following carefully to avoid damage

or injury.

IMPORTANT: Check for any damage or marks.

If you nd the appliance is damaged or marked,

you must report it within 7 days if you wish to

claim for damage/ marks under the manufacturer’s

warranty. This does not aect your statutory rights.

Sfety Instructions

esatto.house

WARNING: Follow these instructions carefully

to avoid injury or damage to your appliance.

• Do not allow pots to boil dry, as damage to both

pan and cooktop may result.

• Do not operate the cooktop for an extended

period without a pot or pan on the burner.

• Do not allow large cookware to overhang the

cooktop onto adjacent benchtop. This will cause

scorching to the benchtop surface.

• Do not allow cooking pots or pans to intrude into

the area which is close to the controls.

• Ensure burner bodies and trivets are properly

located on the cooktop (i.e. correctly assembled

and positioned).

CAUTION: Follow these instructions carefully

to avoid an electric shock or re.

It is important to use your cooktop safely. Check

these safety points before using your cooktop.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

• Children should be supervised to ensure they do

not play with this appliance.

• During use, this appliance becomes hot. Care

should be taken to avoid touching hot surfaces.

To avoid burns, young children should be kept

awa y.

• This appliance must not be used as a

space heater.

• Keep vents clear of obstructions.

• In order to avoid a re, this appliance must be

kept clean.

• Do not spray aerosols in the vicinity of this

appliance while it is in operation.

• Do not store ammable materials on or under

this appliance, e.g. aerosols.

• Do not remove the trivet and enclose the burner

with a wok stand as this will concentrate and

deect heat onto the burner.

• Do not use large pots or heavy weights

which can bend the trivet or deect ame onto

the burner.

• Do not place anything, e.g. asbestos mat

between pan and trivet as serious damage to the

cooktop may occur.

• For maximum stability, ensure pots and pans are

centrally located on the trivets.

• Handles should be turned away from the front of

the bench to avoid accidents.

• Do not modify this appliance.

• Only models tted with ame safeguard

can be used in marine craft, caravans

or mobile homes.

UNPACKING

During transportation, protective packaging was

used to protect the appliance against any damage.

After unpacking, please dispose of all elements of

packaging in a way that will not cause damage to

the environment.

All materials used for packaging the appliance are

environmentally friendly; they are 100% recyclable

and are marked with the appropriate symbol.

CAUTION: During unpacking, the packaging

materials (polythene bags, polystyrene pieces, etc.)

should be kept out of reach of children.

DISPOSAL OF THE APPLIANCE

Old appliances should not simply be disposed

of with normal household waste and should be

delivered to a collection and recycling centre for

electric and electronic equipment. A symbol shown

on the product, the instruction manual or the

packaging shows that it is suitable for recycling.

Materials used inside the appliance are recyclable

and are labelled with information concerning this.

By recycling materials or other parts from used

devices you are making a signicant contribution

to the protection of our environment.

Information on appropriate disposal centres

for used devices can be provided by your local

authority.

User Manual

Product Overview

YOUR COOKTOP

Figure 1A — ECGG604W

Figure 1B — ECGG905W

KEY

A. Toughened Blck Glss

B. Burner Control Knobs

C. Cst Iron Trivets

D. Auxiliry Burner

E. Semi Rpid Burner

F. Rpid Burner

G. Wok Burner

E F

esatto.house

THE BURNER

Figure 2A

COOKTOP COMPONENTS  ACCESSORIES

Your Estto cooktop is supplied with:

1 × Cooktop

1 × Wok support trivet

1 × Voltge regultor vlve

4 × Injector (ECGG604W)

5 × Injector (ECGG905W)

1 × Pressure joint

4 × Brckets

4 × Sponges

4 × Screws

1 × Elbow

1 × User Mnul

1 × Quick Strt Guide

Figure 2B

Burner Flame Ports

Ignition Spark Plug

Flame Safeguard Sensor

Skirt

Burner

Injector

Note: The images in this user manual are for reference only. Your appliance may appear dierently.

User Manual

INSTALLATION

• An uthorised person must instll this pplince

nd MUST provide  Certicte of Complince.

This certicte should be retined long with

purchse informtion.

• Before using the cooktop, ensure tht ll

pcking mterils re removed from the

pplince.

• In order to void ny potentil hzrd, the

instlltion instructions in this booklet, nd ny

lbels on the pplince must be followed.

• Ensure tht ll specied vents, openings nd ir

spces re not blocked.

• Where the pplince is built into  benchtop,

the benchtop mteril must be cpble of

withstnding 85°C.

• Ensure tht the duplicte rting lbel

(in the instruction pck) is ttched to 

redily ccessible djcent surfce, so tht the

cooktop cn be esily identied in the cse of

 service cll.

SERVICING

• Servicing MUST only be crried out by

uthorised personnel.

• To mintin sfe opertion, it is recommended

tht the product be inspected every ve yers

by n uthorised service person.

• If the supply cord is dmged, it must be

replced by the mnufcturer, its service gent

or similrly qulied persons in order to void

 hzrd.

WARNING: Never instll  cooktop tht hs

been dmged. Plese contct our Service Tem

for ssistnce.

CLEANING

• Alwys ensure the pplince is turned o

before clening.

• This pplince contins luminium ttings.

Do not use custic bsed cleners.

• Do not use stem cleners s this my cuse

moisture build up on electricl components.

• Alwys clen the pplince immeditely fter

ny food spillge.

• Do not plce ny components in  dishwsher.

• Refer to the Clening  Cre section on pge 11

of this user mnul for instructions on clening

nd mintining your glss hob pnel.

CAUTION: Never plce burners or trivets in

 dishwsher.

Before First Use

esatto.house

STANDARD BURNER

Figure 3A

TRIPLE RING WOK BURNER

Figure 3B: ECGG604W Figure 3C: ECGG905W

Both rings of the wok burner operte between

knob rottion settings ‘1’ nd ‘9’.

NOTE: Gs controls turn nticlockwise from ‘OFF’

nd hve limited movement.

CONTROLS

Ech burner is controlled by  control knob.

The mrkings on the control pnel indicte which

burner the knob controls, nd the setting for tht

burner (See Figure 3).

LIGHTING BURNERS

Electronic ignition: These cooktops re tted with

mins powered ignition. When the pplince hs

been connected nd the power is on, depressing

ny knob will relese sprks to ll burners.

CAUTION:

• Keep hnds cler of burners when lighting.

• If burner does not light within 5 seconds, turn

knob to ‘OFF’ position, wit to llow gs to

disperse nd then try lighting gin.

• Burners MUST be operted between ‘1’ nd ‘9’

settings only.

To light  burner, the knob must be turned to the

position, then pushed down s fr s possible

for pproximtely 5 seconds. If the me goes

out when the knob is relesed simply depress the

knob gin, this time holding it down with slightly

more force for the sme length of time.

The height of the me cn be vried by turning

the control knob towrd the ‘1’ position.

NOTE: When the wok burner is turned to setting 1,

only the smll inner ring stys lit. This is  norml

function of the dul wok burner to provide  very

low power me option.

In the bsence of electricl power, crry out the

ignition directly to the burner with  hnd held

ignition source.

Using Your Cooktop

Note: The diagrams in this user manual are for reference only. Your appliance may appear dierently.

User Manual

Burners

CHOICE OF BURNER

For your convenience there is  choice of burners

to choose from:

• A smll Auxiliry burner for specil low het

nd slow cooking. Minimum pn size 120mm

(Mximum 160mm).

• A medium Semi-Rpid burner for norml

cooking nd simmering. Minimum pn size

160mm (Mximum 180mm).

• A lrge Rpid burner (ECGG905W only) for fst

heting nd lrge pots nd pns. Minimum pn

size 200mm (Mximum 240mm).

• A Triple Ring wok burner for very fst heting

using  wok or lrge pot or pn. Minimum pn

size 200mm (Mximum 240mm).

To conserve gs plce the pn centrlly over the

burner nd djust the me so tht it does not

extend pst the edge of the pn (Figure 4). Do not

boil food too rpidly. A vigorous boil will not cook

food ny fster, nd will wste energy.

Figure 4

POTS AND PANS

All common pots nd pns; luminium,

stinless steel, cst iron, cermic, etc., my

be used on your new gs cooktop. Ensure tht

the pots or pns re stedy nd hve t bses

to void dngerous spill-over of hot liquids nd

wsted energy.

CAUTION:

Never use sbestos mts, wire mts or grids,

or luminium foil s it cn led to overheting,

crcked enmel or broken glss. The wrrnty will

be void if these items re used nd cuse  filure.

Woks should only be used on the wok burner nd

the wok support trivet. Refer to Figure 1A  1B on

pge 6 depending on your model.

INCORRECT

A me tht is too high will

cuse gs wstge long

with possibility of heting

or dmge to your hndles.

CORRECT

For  lrge burner,

use  lrge utensil.

CORRECT

A correct me height will

sve gs usge.

CORRECT

For  smll burner,

use  smll utensil.

esatto.house

Clening  Cre

CAUTION:

Ensure the pplince is o nd cool before

clening.

TRIVETS

Persistent stins my require rubbing with 

nylon scourer or cremed powder clensers.

Household enmel cleners re vilble, follow

the mnufcturer’s instructions in their use.

Hrsh brsive cleners, powder cleners,

steel wool or wx polishes should not be used.

GLASS HOB

The glss used s the primry hob hs been

toughened nd mnufctured to the highest

possible stndrds for both sfety nd relibility.

However, it must be remembered tht s it is

glss, it my brek. Tret it ccordingly. To clen

the glss hob use  soft cloth or sponge with

detergent nd wrm wter.

CAUTION: Try to clen up nd remove spillges

immeditely, while the hob is still hot! Especilly

sugr nd foods with  high sugr content

(eg. jm), melted plstics nd foil, ll of which cn

dmge the hob if left.

WARNING! If the surfce is crcked, switch o

the pplince immeditely to void the possibility

of electric shock.

If the hob requires extensive clening:

1. Remove soilge using the rzor blde scrper.

Angle the scrper t pprox. 45° nd scrpe

wy the spillge. The rzor blde cn be

pressed down hrd onto the hob without

cusing ny dmge.

2. Use  hob clener product fter there hs been

sucient time llowed for the hob to cool.

Shke the bottle nd pply  smll quntity of

clener directly onto the hob.

Rub clen using  dmp cloth or pper towels.

3. Use  dmp cloth to remove ll remining

trces of the clener, which could otherwise

burn on when the hob is next used. Wipe the

hob dry.

TRIVETS AND BURNERS

These cn ll be lifted o nd removed for

seprte clening.

CAUTION: When retting the burners, ensure

tht they re correctly seted.

Ensure burners re thoroughly dried fter clening

or spillge. When clening the burners, ensure

tht ll the me ports re free of ny blockge

(refer to Figure 2B on pge 7). If necessry, use

 toothpick or brush to cler ports. The outer

surfce of the burner cps hve  polished

nish nd extr cre needs to be tken to void

scrtching this surfce during clening. In

instnces of hevy soiling, it my be necessry to

pply  non-brsive clening compound nd rub

with  cloth until the soiling is removed nd then

nish with  soft, dry cloth.

WARNING:

NEVER plce trivets or burners in the dishwsher.

IGNITION SPARK PLUG 

FLAME SAFEGUARD SENSOR

Gently clen the ignition sprk plug nd me

sfegurd sensor with  dmp cloth to void

lighting diculties. Ensure tht they re dry

before use.

INJECTOR

Ensure the injector remins free of ny foreign

mteril. If necessry, use  thin piece of wire to

cler the orice.

User Manual

Troubleshooting

If you hve  problem with the cooktop, check the tble below. You my be ble to solve the problem

nd this will sve you from pying for  service cll. You will hve to py for  service cll even in the

wrrnty period if the problem is one listed below.

Tble 1

PROBLEM POSSIBLE CAUSE SOLUTION

Burner will not light

even though the

sparker is working

Knob not held down long enough in ‘9’

position for ame safeguard.

Repeat lighting procedure and

hold knob down for 5 seconds in

‘9’ position. (Refer page 9).

Gas supply valve turned o. Turn on gas supply to appliance.

Wrong knob turned.

Ensure the knob you are turning

corresponds to the burner you

want to light.

Port blockage in ignition area. Ensure that ports in ignition area

are clean and dry.

Ignition spark plugs wet or dirty. Dry or clean ignition spark plugs.

No spark is obtained

when control knob is

activated

Electricity supply is disconnected or

switched o.

Switch on electricity or check

fuses.

Ignition spark plugs wet or dirty. Dry or clean ignition spark plugs.

Flames uneven or

tending to lift

Flame ports blocked or wet. Clean or dry ame ports.

Burner cap incorrectly tted. Ensure this component is

tted correctly.

Flames not staying on

when knob

is released

Knob not held down long enough in ‘9’

position for ame safeguard to engage.

Repeat lighting procedure and

hold knob down for 5 seconds in

‘9’ position. (Refer page 9).

Knob not set between ‘1’ and ‘9’ Knob MUST be set between

these positions.

Dirt or spillage on ame safeguard

sensor. Clean ame safeguard sensor tip.

Low heat, slow

cooking

Incorrect cooking pot or pan being

used. Refer to Figure 4 (page 10).

Benchtop or knobs

overheating

Incorrect cooking pot or pan being

used. Refer to Figure 4 (page 10).

Pot or pan not located on burner

properly.

Ensure pot or pan is centrally

located on burner.

esatto.house

Technicl Dt

Estto reserves the right to lter these specictions. This pplince conforms to AS/NZS 5263.

Tble 2

FEATURES ECGG604W ECGG905W

Burners 4 5

Wok Yes, triple ring Wok Yes, triple ring Wok

Ignition 220–240V~ 220–240V~

Trivet Cast Iron Cast Iron

Hob Material Toughened Glass Toughened Glass

Features Ignition under knob Ignition under knob

Flame Failure Safety Yes Yes

Colours Black Glass Black Glass

Gas Types NG (LP conversion

kit supplied)

NG (LP conversion

kit supplied)

COOKTOP PHYSICAL DIMENSIONS mm

Width 600 900

Depth 510 510

Height 100 100

CUT OUT DIMENSIONS mm

Width 560 830

Depth 490 490

ENERGY RATING NG  MJ/h

Auxiliary burner 4.3 4.3

Semi Rapid burner × 2 6.3 6.3

Rapid burner N /A 10.8

Wok burner 13.5 13.5

Total MJ/h 30.4 41.2

User Manual

Instlltion Instructions

This pplince must be instlled by n uthorised person nd in complince with:

• AS/NZS 5601.1 Gs Instlltions Prt 1: Generl Instlltions, nd AS/NZS 5601.2 Gs Instlltions

Prt 2: LP Gs instlltions in crvns nd bots for non-propulsive purposes, or the relevnt

instlltion code for gs pplinces in your country.

• The locl gs tting regultions, municipl building codes, electricl wiring regultions nd ny other

relevnt sttutory regultions.

• The prticulr instructions s given below.

• A certicte of complince MUST be given to the customer fter the ppliction is successfully

instlled.

CAUTION: Cooktops re supplied set up for nturl gs (NG). To use on LPG, the injectors must be

chnged using the conversion kit supplied. Refer LPG Conversion on pge 19.

Figure 5A – ECGG604W Figure 5B – ECGG905W

* Minimum clernce from cut-out to combustible surfce.

NOTE: This dimension is not relevnt if the djcent surfce is non-combustible.

600

510

490

100

560

Gas Supply

Connection

120*

145*

900

510

490

100

Gas Supply

Connection

130*

110*

130*

830

esatto.house

INSTALLATION PROCEDURE

• The bench cutout should be mde s per

cutout dimensions in Tble 2 nd Figure 5A 

5B (depending on your model).

• Adjcent wlls, cupbords nd protection

for combustible mterils: Ensure tht the

pplince is instlled in ccordnce with

AS/NZS 5601.1, or AS/NZS 5601.2 with regrd

to clernces to combustible surfces nd

mterils, nd clernces to rngehoods nd

exhust fns.

To ensure clernces to combustible

surfces observe the minimum distnce

requirements shown in Figure 5A  5B

(relevnt to your model).

Clernces to combustible surfces my be

reduced if combustible surfces re protected

in ccordnce with AS/NZS 5601.1, or

AS/NZS 5601.2.

• Brrier: A brrier must be instlled to prevent

ccidentl contct with the cooktop bse,

where the bse of the cooktop is ccessible

from below (i.e. Inside  cupbord, etc.).

A minimum clernce of 25mm must be

mintined between the bse nd the brrier.

This brrier my be mde of ny non-

combustible, rigid mteril.

Brrier protection is not necessry if the

product is instlled bove n underbench oven

or similr pplince nd/or if the cupbord

construction is such tht the underside of the

cooktop is not ccessible.

• Ensure tht there is n erthed power outlet

within 900mm of the rer right hnd side of

the cooktop when instlled. This should be

ccessible t ll times.

• A self-dhesive Fom Tpe hs been provided

to ct s  seling gent nd is to be plced

round the edge of the hob underside. Ensure

tht there re no gps in the Fom Tpe. Tke

cre to ensure tht the sels meet without

overlpping. The thickness of this Fom Tpe is

3mm nd the width is 10mm.

WARNING: Do not use  silicon selnt to

sel the pplince ginst the benchtop. This

will mke it dicult to remove the pplince

should the cooktop need  service.

• Fit the pull down clmps supplied to

ensure tht the cooktop cnnot move fter

instlltion. Refer to Figure 6 nd the following

instructions.

• Remove ny excess sel visible fter

instlltion

WARNING: Filure to x the cooktop to the bench

could result in loosening of the gs connection

through movement of the cooktop nd  gs lek

my result.

Clmps nd screws re supplied with ech

cooktop. Fit the clmps s shown in Figure 6.

When benchtops re less thn 35mm in thickness,

it my be necessry to t  spcer between the

benchtop nd ech clmp to ensure clmps cn

be tightened suciently.

FITTING THE CLAMPS

• Ensure tht the hob is free from ll burner

pieces nd trivets. Plce the hob upside down

on  soft surfce to protect both the hob nd

your worksurfce from dmge.

• Plce the brcket (B) over the holes tht mtch

the size of the screws. There re one set of

screw holes in ech corner of the hob. Slightly

tighten  screw (C) through the brcket (B) so

tht the brcket is ttched to the hob whilst

still llowing you to djust it’s position.

• Crefully turn the hob bck over nd then

gently lower it into the perture hole tht you

hve cut-out in your benchtop.

• On the underside of the hob, djust the

brckets into  position tht is suitble for your

benchtop. Then fully tighten the screws (C) to

secure the hob into position.

Figure 6

Installing the appliance

Sponge

Bottom view

The thickness of the sponge is 3 mm.

The width of the sponge is 10 mm.

of the screws.There are one set of screw holes in each

corner of the hob (H) .

Slightly tighten a screw (C) through the bracket (B) so

that the bracket is attached to the hob, but so that you

can still adjust the position

.2 Carefully turn the hob back over and then gently lower

it into the aperture hole that you have cut out.

.3 On the underneath of the hob, adjust the brackets into

a position that is suitable for your worktop.

Then fully tighten the screws (C) to secure the hob into

position.

(A) SEALING STRIP

Remove the pan supports, the burner lid

and flame spreader and carefully turn the

appliance upside down and place it on a

cushioned mat.

Take care that the Ignition devices and

flame supervision devices are not damaged

in this operation.

2. Apply the sponge provided around the

edge of the appliance.

Do not leave a gap in the sealing agent or

overlap the thickness.

3ODFHWKHEUDFNHW %RYHUWKHKROHVWKDWPDWFKWKHVL]H

7KLVZLOOPDNHLWGLI¿FXOWWRUHPRYHWKH

DSSOLDQFHIURPWKHDSHUWXUHLQIXWXUH

SDUWLFXODUO\LILWQHHGVWREHVHUYLFHG

Do not use a silicon sealant to seal the

appliance against the aperture.

(A) SEALING STRIP

(B) CLAMP

User Manual

Gs Connection

OPERATION ON N.G./S.N.G

This appliance is supplied for use with Natural

Gas. However, it can be converted for use with

LPG. Refer to LPG Conversion on page 19.

SUPPLY PIPE SIZING

The total hourly gas consumption for the

appliance is shown on the data label. The required

supply pressure (i.e. at inlet to appliance regulator)

for each gas type is shown on the data label, and

given in Table 3 (page 18). Use this information

in conjunction with the length of run, number

of elbows, tees and bends, the available service

pressure and the supply requirements of other

installed appliances to determine a suitable

pipe size.

For assistance in this matter refer to the

appropriate section of AS/NZS 5601.1 or

AS/NZS 5601.2.

An AGA certied class B or D exible connection

may be used to connect the cooktop in

accordance with AS/NZS 5601.1, in particular

section 5.9 and clause 6.10.1.8, or AS/NZS 5601.2,

in particular section 2.11.

Where a hose assembly is used and the cooktop

is in the installed position, the hose assembly shall

be suitable for connection to a xed consumer

piping outlet located at a point 800 – 850mm

above the oor and in the region outside the width

of the appliance to a distance of 250mm. The

point of connection to consumer piping must be

accessible with appliance installed.

ELBOW POSITIONING

It is possible to reposition the elbow if required

by loosening the locking nut and elbow by using

two spanners. Re-tighten the entire assembly after

the elbow has been repositioned. When tting

elbow to appliance, ensure that the sealing washer

is tted.

Note to Installer: Assembly of elbow to manifold

at rear of unit requires two spanners to secure

locking nut and ensure leak free connection.

For this reason the elbow is best secured onto

cooktop manifold before installing unit into

benchtop.

esatto.house

Gas Connection

Statutory requirements

This installation must conform with the following:

■Manufacturer’s Installation instructions

■Local Gas Fitting Regulations

■Municipal Building Codes

■Refer to AS/NZS 5601.1 for Gas Installations

■S.A.A. Wiring Code

■Local Electrical Regulations

■Any other statutory regulations

Preparing to install

Refer to AS/NZS 5601.1 for piping size details. These built-in cooktops are intended to

be inserted in a benchtop cutout. Only an officially authorised technician should

connect the appliance. Before you begin, turn off the gas and electricity supply.

A full operational test and a test for possible leakages must be

carried out by the fitter after installation.

Access to the whole length of the connection hose must be possible

and the gas hose must be replaced before its use before the end of

service life (indicated on the hose.)

Before Leaving-Check all connections for gas leaks with soap and

water.

DO NOT use a naked flame for detecting leaks. Ignite all burners both

individually and concurrently to ensure correct operation of gas

valves, burners and ignition. Turn gas taps to low flame position and

observe stability of the flame for each burner individually and all

together. Adhere the duplicate data plate to an accessible location

near the hotplate. When satisfied with the hotplate, please instruct

the user on the correct method of operation. In case the appliance

fails to operate correctly after all checks have been carried out, refer

to the auth orised service provider in your area.

Natural gas connection

115

LPG gas connection

pressure test point

Figure 7

REGULATOR

An appliance regulator is provided. The regulator

must be positioned so that the pressure test nipple

is accessible when the appliance is installed.

Connect the gas supply to the ½” B.S.P. internal

thread inlet of the regulator. Refer to ‘bench

cutout’ Figure 5A  5B (relevant to your model) for

connection point position. Regulators are supplied

pre-adjusted and congured by the component

maker for use with Natural Gas.

The appliance installer is not required to

make an adjustment to obtain the correct outlet

pressure setting.

An arrow on the base of the regulator indicates the

direction of gas ow when the inlet and outlet of

the regulator is orientated correctly.

When the regulator has been tted check for leaks

from the connections with soapy water.

ASSEMBLY OF THE REGULATOR

The assembly of the regulator to the cooktop

manifold is achieved via the elbow union and

sealing washer supplied, refer to Figure 7.

The ½” parallel thread connects to the manifold,

and the sealing washer is placed between the

manifold end and the at face on the elbow.

The ½” tapered thread connects to the outlet of

the regulator, and is sealed on the thread using

approved thread sealing tape or approved thread

sealing compound.

The inlet of the regulator is a ½” parallel thread

and is connected to consumer piping or hose

assembly.

Regulators are supplied pre-adjusted and

congured by the component maker for use with

Natural Gas.

The appliance installer is not required to make an

adjustment to obtain the correct outlet

pressure setting.

An arrow on the base of the regulator indicates

the direction of gas ow when the inlet and outlet

of the regulator is orientated correctly. When the

regulator has been tted check for leaks from the

connections with soapy water.

User Manual

CHECKING THE GAS SUPPLY

• Check the mnometer zero point is correct.

• Connect the mnometer to the cooktop

pressure point. This is locted on the regultor.

• Turn on the gs supply nd electricity nd try to

ignite the gs.

NOTE:

It will tke dditionl time to light the gs for the

rst time s ir needs to be purged from the pipes.

With the pplince operting check the outlet

pressure:

• When ll burners of the pplince re operting

t mximum.

• When the smllest burner of the pplince is

operting t minimum.

Under these conditions the outlet pressure should

not vry from the nominl outlet pressure

of 1.00kP by more thn ±0.20kP.

If the regultor ppers to not be performing

stisfctorily, then check the following points:

• If the outlet pressure is consistently too low

then the inlet pressure my be too low nd

djustment of n upstrem regultor my be

needed, or n upstrem regultor or vlve with

insucient ow cpcity my be present in

the gs supply line. If this is suspected then it

my be necessry to repet the checks whilst

mesuring both the inlet nd outlet pressure

to determine if the inlet pressure is in the

rnge 1.13 – 5kP.

• Check tht the regultor hs been tted to

the gs supply line in the correct orienttion,

the rrow on the bse of the body indictes the

direction of gs ow.

Once these checks hve been completed, if the

regultor still fils to perform in  stisfctory

mnner it should be replced.

Tble 3A – ECGG604W

Burner Type Nturl Gs

(Nominl Test point pressure: 1.00kP)

LPG

(Nominl Test point pressure: 2.75kP)

Injector Size

(mm)

Gs Consumption

(MJ/h)

Injector Size

(mm)

Gs Consumption

(MJ/h)

Auxiliary burner 0.93 4.3 0.58 4.3

Semi Rapid burner 1.15 6.3 0.68 6.3

Rapid burner ————

Wok burner 1.72 13.5 1.0 13.5

Tble 3B – ECGG905W

Burner Type Nturl Gs

(Nominl Test point pressure: 1.00kP)

LPG

(Nominl Test point pressure: 2.75kP)

Injector Size

(mm)

Gs Consumption

(MJ/h)

Injector Size

(mm)

Gs Consumption

(MJ/h)

Auxiliry burner 0.93 4.3 0.58 4.3

Semi Rpid burner 1.15 6.3 0.68 6.3

Rpid burner 1.5 10.8 0.9 10.8

Wok burner 1.72 13.5 1.0 13.5

Gs Connection (Continued)

esatto.house

This pplince is supplied set up for Nturl

Gs usge. A conversion kit is included with the

product for Universl LPG usge. The conversion

kit contins the pproprite injectors, 1 Brss Test

Point nd 1 LPG sticker.

Plese follow the procedure below if 

conversion to suit UNIVERSAL LPG is required:

• Remove the hotplte trivets, burner cps nd

burner crowns to ccess the hotplte injectors.

Replce the fctory tted injectors with the

pproprite injectors, s supplied. Refer to

injector orice tble for injector sizes. The

injector size is stmped on the side of the

injector.

• Connect the brss test point dpter (pictured

opposite) using pproved gs thred tpe or

compound to the elbow tting.

• Turn on the gs supply nd t ech new

connection check for leks using sopy wter.

Ech hotplte vlve should be turned on, one

t  time, nd the injector hole blnked o for

severl seconds.

• With the pplince operting check the outlet

pressure when ll burners of the pplince

re operting t mximum, when the smllest

burner of the pplince is operting t

minimum.

Under these conditions the outlet pressure

should not vry from the nominl outlet

pressure of 2.60kP by more thn ±0.52kP.

• If the regultor ppers to not be performing

stisfctorily then check the following points:

• If the outlet pressure is consistently too low

then the inlet pressure my be too low nd

djustment of n upstrem regultor my be

needed, or n upstrem regultor or vlve with

insucient ow cpcity my be present in the

gs supply line.

• If this is suspected then it my be necessry to

repet the checks whilst mesuring both the

inlet nd outlet pressure to determine if the

inlet pressure is in the rnge 2.75 – 7.00kP.

• One by one, turn the knobs to minimum nd

screw in the bypss screw (ccessible when

the knob is removed) until  smll stble me

results;  length of 3-4mm. Turn the knob to

mximum nd then bck to minimum to ensure

tht the correct minimum me is mintined.

• Attch the LPG sticker to the cooker, ner the

gs supply inlet. Cover the Nturl Gs lbel

tht is fctory tted.

LPG Conversion

User Manual

Electricl Connection

ELECTRICAL CONNECTION

220240 VOLTS

The pplince is supplied with  stndrd 7.5 Amp

service cord terminted by  3-pin plug for

connection to  stndrd 10 Amp household

socket. The electricl supply is required to power

the electronic ignition system.

Note: It will be necessry for servicing purposes

to disconnect the electricl power supply. The

power point should therefore be ccessible fter

the pplince is instlled, s specied in the locl

wiring regultions.

Digrm 1A  1B (depending on your model)

re schemtics of the wiring in the pplince.

IMPORTANT:

This pplince must be erthed.

This pplince is designed to be connected to 

220-240V, 50Hz-60Hz AC electricity supply.

The wires in the mins led re coloured in

ccordnce with the following code:

1. Green/Yellow = Erth

2. Blue = Neutrl

3. Brown = Live

IMPORTANT: The wire which is coloured

Green/Yellow must be connected to the terminl

which is mrked with the letter E or by the

Erth symbol.

WARNING: When the power cord is dmged it

must be replced by the mnufcturer, its service

gent or similrly qulied persons in order to

void  hzrd.

Digrm 1A – ECGG604W

Digrm 1B – ECGG905W

Electrical Connection

- Green/yellow = Earth

- Blue = Neutral

- Brown = Live

■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.

Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG

WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK

V\PERO

ʄ:,5

When the power cord is damaged it must be replaced by the manufacturer to produce,

customer service agent or similarly qualified personnel.

,1*',$*5$0

Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG

Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH

Switch 1

Switch 2

AC INPUT

Switch 3

Switch 4

IGNITION

Installation

Electrical Connection

- Green/yellow = Earth

- Blue = Neutral

- Brown = Live

■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.

Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG

WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK

V\PERO

ʄ:,5

When the power cord is damaged it must be replaced by the manufacturer to produce,

customer service agent or similarly qualified personnel.

,1*',$*5$0

Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG

Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH

Switch 1

Switch 2

AC INPUT

Switch 3

Switch 4

IGNITION

Model: ICGG604W Model: ICGG755W & ICGG905W

Wiring Diagrams

Electrical Connection

- Green/yellow = Earth

- Blue = Neutral

- Brown = Live

■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.

Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG

WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK

V\PERO

ʄ:,5

When the power cord is damaged it must be replaced by the manufacturer to produce,

customer service agent or similarly qualified personnel.

,1*',$*5$0

Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG

Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH

Switch 1

Switch 2

AC INPUT

Switch 3

Switch 4

IGNITION

Electrical Connection

- Green/yellow = Earth

- Blue = Neutral

- Brown = Live

■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.

Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG

WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK

V\PERO

ʄ:,5

When the power cord is damaged it must be replaced by the manufacturer to produce,

customer service agent or similarly qualified personnel.

,1*',$*5$0

Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG

Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH

Switch 1

Switch 2

AC INPUT

Switch 3

Switch 4

IGNITION

Switch 5

Electrical Connection

- Green/yellow = Earth

- Blue = Neutral

- Brown = Live

■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.

Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG

WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK

V\PERO

ʄ:,5

When the power cord is damaged it must be replaced by the manufacturer to produce,

customer service agent or similarly qualified personnel.

,1*',$*5$0

Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG

Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH

Switch 1

Switch 2

AC INPUT

Switch 3

Switch 4

IGNITION

Gas adjustment

Injector

Control handle

Tap

Sealing ring

Remove the pan support, Burner lid and Flame spreader.

Unscrew the injector using a 7mm box spanner and

replace it with the stipulated injector for new gas

supply. Carefully reassemble the all components.

After injectors are replaced, it is advisable to strongly

tighten the injector in place.

Adjustment of minimum level of the flame.

Turn the taps down to minimum.

Remove the knob from the tap and place a small

bladed screwdriver in the centre of the tap shaft.

The correct adjustment is obtained when the flame

has a length of about 3 - 4 mm.

For butane

/ propane gas, the adjusting screw must

Make sure that the flame does not go out by

quickly turning from maximum flow to minimum

flow. If it does then remove the control knob and

make further adjustments to the gas flow, testing it

again once the adjustment has been made.

Repeat this process for each one of the gas taps.

be tightly screwed in.

Refit the control knob.

Ŷ7DNHSUHFDXWLRQVRQWKHRSHUDWLRQVDQGDGMXVWPHQWVWREHFDUULHGRXWZKHQ

FRQYHUWLQJIURPRQHJDVWRDQRWKHU

Ŷ$OOZRUNPXVWEHFDUULHGRXWE\DTXDOL¿HGWHFKQLFLDQ

Ŷ%HIRUH\RXEHJLQWXUQRIIWKHJDVDQGHOHFWULFLW\VXSSO\WRWKHDSSOLDQFH

Ŷ

%HIRUHSODFLQJWKHEXUQHUV

EDFNRQWKHWRSSODFHPDNHVXUH

WKDWWKHLQMHFWRULV QRWEORFNHG

FDUULHGRXWDIWHUJDVFRQYHUVLRQ

VXFKDVVRDSZDWHURUJDV

DTXDOL¿HGWHFKQLFLDQRULQVWDOOHU

KDVWRPDUN³9´RQWKHULJKWJDV

FDWHJRU\ 

WRPDWFKZLWKWKH

VHWWLQJLQUDWLQJSODWH

5HPRYHWKHSUHYLRXV

VHWWLQJ³9´PDUN

LQWKHHYHQWRIDPDOIXQFWLRQ

FKDQJHWKHZKROHWDS

Ŷ

$IXOORSHUDWLRQDOWHVWDQGDWHVW

IRUSRVVLEOHOHDNDJHVPXVWEH

Ŷ

$IWHUFRPSOHWLQJFRQYHUVLRQ

GHWHFWRU

Change the injector of the burners.

ŶDo not dismantle the tap shafe:

Page is loading ...

Esatto ECGG604W, ECGG905W Gas on Glass Cooktop User manual

Brand: Esatto

Model: ECGG604W, ECGG905W Gas on Glass Cooktop

Type: User manual

This manual is also suitable for

ECGG604W

Download PDF

report

Esatto ECGG604W, ECGG905W Gas on Glass Cooktop User manual

This manual is also suitable for

Esatto ECGG604W, ECGG905W Gas on Glass Cooktop User manual

Related papers

Other documents