Esatto EOCG60 User manual

Brand: Esatto

Model: EOCG60

Type: User manual

Version

V1.2 0923

Everything you need

for your Gs Cooktop

is in this User Mnul

Model/s

ECG604E

User Manual

Welcome

Congrtultions on purchsing your new Gs Cooktop. The Estto brnd is

proudly distributed within Austrli by Residenti Group Pty Ltd.

Plese refer to the wrrnty crd t the rer of this mnul for informtion

regrding your product’s prts nd lbour wrrnty, or visit us online t:

www.residenti.group

At Residenti Group, we re customer obsessed nd our Support Tem re

there to ensure you get the most out of your pplince. Should you wnt to

lern more bout your new gs cooktop, it's fetures or importntly tking

cre of the pplince, our Support Tem re here to help.

You cn use our online Support Centre t nytime by visiting:

http://support.residentigroup.com.u

Or you cn contct us vi phone by diling: 1300 11 HELP (4357).

It is importnt tht you red through the following use nd cre mnul

thoroughly to fmilirise yourself with the instlltion nd opertion

requirements of your pplince to ensure optimum performnce.

Agin, thnk you for choosing n Estto pplince nd we look forwrd

to being of service to you.

Kind Regrds,

The Residenti Tem

Residenti roup

—

Head Office

165 Brkly Avenue

Burnley, Victori

Austrli 3121

—

ACN

600 546 656

—

Online

residenti.group

www.estto.house

@estto.house

—

Postage

PO Box 5177

Burnley, Victori

Austrli 3121

—

Telephone

1300 11 4357

www.estto.house

esatto.house

Pge 2

Welcome

Pge 4

Sfety Instructions

Pge 6

Product Overview

Pge 7

Before First Use

Pge 8

Using Your

Cooktop

Pge 9

Burners

Pge 10

Clening  Cre

Pge 11

Troubleshooting

Pge 12

Technicl Dt

Pge 13

Instlltion

Instructions

Pge 16

Gs Connection

Pge 19

LPG Conversion

Pge 20

Electricl

Connection

Pge 21

Testing Applince

Opertion

Pge 23

Purchse Detils

Pge 24

Wrrnty

Contents

User Manual

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP

FOR FUTURE REFERENCE

Red this mnul thoroughly before rst use,

even if you re fmilir with this type of product.

The sfety precutions enclosed herein reduce

the risk of re, electric shock nd injury when

correctly dhered to. Mke sure you understnd

ll instructions nd wrnings.

Keep the user mnul in  sfe plce for future

reference, long with the completed wrrnty

crd nd purchse receipt. If you sell or trnsfer

ownership of this product, pss on these

instructions to the new owner.

Alwys follow bsic sfety precutions nd

ccident prevention mesures when using n

electricl pplince. The following sttements you

will see in this booklet hve these menings:

WARNING: Indicting informtion concerning

your personl sfety.

CAUTION: Indicting informtion on how

to void dmging the pplince, benchtop

or cbinetry.

IMPORTANT: Indicting tips nd informtion

bout use of the pplince.

USAGE CONDITIONS AND RESTRICTIONS

• Domestic use only: This pplince is intended

for indoor household use only. It is not intended

for commercil, industril or outdoor use. It is

not intended for use in  recretionl vehicle.

• Purpose: Do not use this pplince for nything

other thn its intended purpose. Other uses re

not recommended nd my cuse re, electric

shock or personl injury.

• Attchments: The use of ttchments is not

recommended by the pplince mnufcturer

nd distributor s they my be hzrdous.

• Improper use: Dmge due to improper use,

or repirs mde by unqulied personnel will

void your wrrnty. We ssume no libility

for ny eventul dmges cused by misuse

of the product or noncomplince with these

instructions.

BEFORE USING YOUR APPLIANCE

This mnul explins the proper use of your new

Estto cooktop. Plese red this mnul crefully

before using the product. This mnul should be

kept in  sfe plce for hndy reference.

This rngehood is  domestic pplince which

hs been mnufctured nd tested to comply

with Austrlin nd New Zelnd Stndrd

AS/NZS 5263.

This cooktop must only be instlled in ccordnce

with the instructions provided. Incorrect

instlltion my cuse hrm to persons, dmge

property nd void the product’s wrrnty.

Red the following crefully to void dmge

or injury.

IMPORTANT: Check for ny dmge or

mrks. If you nd the pplince is dmged

or mrked, you must report it within 7 dys if

you wish to clim for dmge/ mrks under the

mnufcturer’s wrrnty. This does not ect

your sttutory rights.

WARNING: Follow these instructions crefully

to void injury or dmge to your pplince.

• Do not llow pots to boil dry, s dmge to both

pn nd cooktop my result.

• Do not operte the cooktop for n extended

period without  pot or pn on the burner.

• Do not llow lrge cookwre to overhng the

cooktop onto djcent benchtop. This will cuse

scorching to the benchtop surfce.

• Do not llow cooking pots or pns to intrude

into the re which is close to the controls.

• Ensure burner bodies nd trivets re properly

locted on the cooktop (i.e. correctly ssembled

nd positioned).

CAUTION: Follow these instructions crefully

to void n electric shock or re.

Sfety Instructions

esatto.house

It is importnt to use your cooktop sfely. Check

these sfety points before using your cooktop.

• This pplince is not intended for use by

persons (including children) with reduced

physicl, sensory or mentl cpbilities, or lck

of experience nd knowledge, unless they hve

been given supervision or instruction concerning

use of the pplince by  person responsible for

their sfety.

• Children should be supervised to ensure they do

not ply with this pplince.

• During use, this pplince becomes hot.

Cre should be tken to void touching hot

surfces. To void burns, young children should

be kept wy.

• Prolonged intensive use of the pplince my

cll for dditionl ventiltion, for exmple

opening of  window, or incresing the level of

mechnicl ventiltion where present.

Keep vents cler of obstructions.

• This pplince must not be used s 

spce heter.

• Keep vents cler of obstructions.

• In order to void  re, this pplince must be

kept clen.

• Do not spry erosols in the vicinity of this

pplince while it is in opertion.

• Do not store mmble mterils on or under

this pplince, e.g. erosols.

• Do not remove the trivet nd enclose the burner

with  wok stnd s this will concentrte nd

deect het onto the burner.

• Do not use lrge pots or hevy weights

which cn bend the trivet or deect me onto

the burner.

• Do not plce nything, e.g. sbestos mt

between pn nd trivet s serious dmge to

the cooktop my occur.

• For mximum stbility, ensure pots nd pns re

centrlly locted on the trivets.

• Hndles should be turned wy from the front

of the bench to void ccidents.

• Do not modify this pplince.

• This pplince cnnot be instlled on mrine

crft, crvns or mobile homes.

• Do not use this pplince s  spce heter.

• This pplince is not suitble for instlltion

with ftermrket lids or covers.

CAUTION: In the event of  gs lek, tke the

following ctions:

• Do not turn on the room light.

• Do not switch on/o ny electricl pplinces

nd do not touch ny electric plugs.

• Do not use  telephone.

1. Stop using the product nd close the

middle vlve.

2. Open the window to ventilte.

3. Contct our service centre by using  mobile

phone outside.

NOTE: The fuel gs contins mercptn. In the

event of  gs lek, it will smell like rotten eggs or

grlic—even if there is only 1/1000th of the gs is

in the ir.

UNPACKING

During trnsporttion, protective pckging ws

used to protect the pplince ginst ny dmge.

After unpcking, plese dispose of ll elements of

pckging in  wy tht will not cuse dmge to

the environment.

All mterils used for pckging the pplince re

environmentlly friendly; they re 100% recyclble

nd re mrked with the pproprite symbol.

CAUTION: During unpcking, the pckging

mterils (polythene bgs, polystyrene pieces,

etc.) should be kept out of rech of children.

DISPOSAL OF THE APPLIANCE

Old pplinces should not simply be disposed

of with norml household wste nd should be

delivered to  collection nd recycling centre for

electric nd electronic equipment. A symbol shown

on the product, the instruction mnul or the

pckging shows tht it is suitble for recycling.

Mterils used inside the pplince re recyclble

nd re lbelled with informtion concerning this.

By recycling mterils or other prts from used

devices you re mking  signicnt

contribution to the protection of

our environment. Informtion on

pproprite disposl centres for

used devices cn be provided by

your locl uthority.

User Manual

THE BURNER

Figure 2A

Product Overview

Burner Flme Ports

Ignition Sprk Plug

Flme Sfegurd Sensor

Skirt

Burner

Injector

Note: The images in this user manual are for reference only. Your appliance may appear dierently.

YOUR COOKTOP

Figure 1A — ECG604E

KEY

A. Stinless Steel Hob

B. Burner Control Knobs

C. Enmel Trivets

D. Auxiliry Burner

E. Semi Rpid Burner

F. Rpid Burner

COOKTOP COMPONENTS

 ACCESSORIES

Your Estto cooktop is supplied with:

1 × Cooktop

1 × Auxiliry pn support

1 × Gs regultor vlve

4 × Injectors

1 × Pressure joint

4 × Brckets

4 × Seling strips

4 × Screws

1 × Elbow

1 × User Mnul

1 × Quick Strt Guide

Figure 2B

esatto.house

INSTALLATION

• An uthorised person must instll this pplince

nd MUST provide  Certicte of Complince.

This certicte should be retined long with

purchse informtion.

• Before using the cooktop, ensure tht ll

pcking mterils re removed from the

pplince.

• In order to void ny potentil hzrd, the

instlltion instructions in this booklet, nd ny

lbels on the pplince must be followed.

• Ensure tht ll specied vents, openings nd ir

spces re not blocked.

• Where the pplince is built into  benchtop,

the benchtop mteril must be cpble of

withstnding 85°C.

• Ensure tht the duplicte rting lbel

(in the instruction pck) is ttched to 

redily ccessible djcent surfce, so tht the

cooktop cn be esily identied in the cse of

 service cll.

SERVICING

• Servicing MUST only be crried out by

uthorised personnel.

• To mintin sfe opertion, it is recommended

tht the product be inspected every ve yers

by n uthorised service person.

• If the supply cord is dmged, it must be

replced by the mnufcturer, its service gent

or similrly qulied persons in order to void

 hzrd.

WARNING: Never instll  cooktop tht hs

been dmged. Plese contct our Service Tem

for ssistnce.

CLEANING

• Alwys ensure the pplince is turned o

before clening.

• This pplince contins luminium ttings.

Do not use custic bsed cleners.

• Do not use stem cleners s this my cuse

moisture build up on electricl components.

• Alwys clen the pplince immeditely fter

ny food spillge.

• Do not plce ny components in  dishwsher.

• Refer to the Clening  Cre section on pge 10

of this user mnul for instructions on clening

nd mintining your stinless steel hob pnel.

CAUTION: Never plce burners or trivets in

 dishwsher.

Before First Use

User Manual

CONTROLS

Ech burner is controlled by  control knob.

The mrkings on the control pnel indicte which

burner the knob controls, nd the setting for tht

burner (See Figure 3).

STANDARD BURNER

Figure 3

NOTE: Gs controls turn nticlockwise from ‘OFF’

nd hve limited movement.

LIGHTING BURNERS

Electronic ignition: These cooktops re tted with

mins powered ignition. When the pplince hs

been connected nd the power is on, depressing

ny knob will relese sprks to ll burners.

CAUTION:

• Keep hnds cler of burners when lighting.

• If burner does not light within 5 seconds, turn

knob to ‘OFF’ position, wit to llow gs to

disperse nd then try lighting gin.

• Burners MUST be operted between ‘1’ nd ‘9’

settings only.

To light  burner, the knob must be turned to the

position, then pushed down s fr s possible

for pproximtely 5 seconds. If the me goes

out when the knob is relesed simply depress the

knob gin, this time holding it down with slightly

more force for the sme length of time.

The height of the me cn be vried by turning

the control knob towrd the ‘1’ position.

In the bsence of electricl power, crry out the

ignition directly to the burner with  hnd held

ignition source.

Using Your Cooktop

Note: The diagrams in this user manual are for reference only. Your appliance may appear dierently.

esatto.house

Burners

CHOICE OF BURNER

For your convenience there is  choice of burners

to choose from:

• A smll Auxiliry burner for specil low het

nd slow cooking. Minimum pn size 120mm

(Mximum 160mm).

• Two medium Semi-Rpid burners for norml

cooking nd simmering. Minimum pn size

160mm (Mximum 180mm).

• A lrge Rpid burner for fst heting nd lrge

pots nd pns. Minimum pn size 200mm

(Mximum 240mm).

To conserve gs plce the pn centrlly over the

burner nd djust the me so tht it does not

extend pst the edge of the pn (Figure 4). Do not

boil food too rpidly. A vigorous boil will not cook

food ny fster, nd will wste energy.

Figure 4

POTS AND PANS

All common pots nd pns; luminium,

stinless steel, cst iron, cermic, etc., my

be used on your new gs cooktop. Ensure tht

the pots or pns re stedy nd hve t bses

to void dngerous spill-over of hot liquids nd

wsted energy.

CAUTION:

Never use sbestos mts, wire mts or grids,

or luminium foil s it cn led to overheting,

crcked enmel or broken glss. The wrrnty will

be void if these items re used nd cuse  filure.

INCORRECT

A me tht is too high will

cuse gs wstge long

with possibility of heting

or dmge to your hndles.

CORRECT

For  lrge burner,

use  lrge utensil.

CORRECT

A correct me height will

sve gs usge.

CORRECT

For  smll burner,

use  smll utensil.

User Manual

Clening  Cre

CAUTION:

Ensure the pplince is o nd hs cooled down

before clening.

TRIVETS

Persistent stins my require rubbing with 

nylon scourer or cremed powder clensers.

Household enmel cleners re vilble, follow

the mnufcturer’s instructions in their use.

Hrsh brsive cleners, powder cleners,

steel wool or wx polishes should not be used.

STAINLESS STEEL HOB

The stinless steel hob my discolour over

time. This is norml due to the high cooking

tempertures. Ech time the cooktop is used, it

should be clen with  product tht is sfe nd

suitble for stinless steel, such s  soft cloth or

sponge with detergent nd wrm wter.

CAUTION: Try to clen up nd remove spillges

immeditely, while the hob is still hot! Especilly

sugr nd foods with  high sugr content

(eg. jm), melted plstics nd foil, ll of which

cn dmge the hob if left. Dry the the surfce

thoroughly fter clening.

If the hob requires extensive clening:

• Use  hob clener product fter there hs been

sucient time llowed for the hob to cool.

Shke the bottle nd pply  smll quntity of

clener directly onto the hob.

Rub clen using  dmp cloth or pper towels.

• Use  dmp cloth to remove ll remining

trces of the clener, which could otherwise

burn on when the hob is next used. Wipe the

hob dry.

TRIVETS AND BURNERS

These cn ll be lifted o nd removed for

seprte clening.

CAUTION: When retting the burners, ensure

tht they re correctly seted.

Ensure burners re thoroughly dried fter clening

or spillge. When clening the burners, ensure

tht ll the me ports re free of ny blockge

(refer to Figure 2B on pge 6). If necessry, use

 toothpick or brush to cler ports. The outer

surfce of the burner cps hve  polished

nish nd extr cre needs to be tken to void

scrtching this surfce during clening. In

instnces of hevy soiling, it my be necessry to

pply  non-brsive clening compound nd rub

with  cloth until the soiling is removed nd then

nish with  soft, dry cloth.

WARNING:

NEVER plce trivets or burners in the dishwsher.

IGNITION SPARK PLUG 

FLAME SAFEGUARD SENSOR

Gently clen the ignition sprk plug nd me

sfegurd sensor with  dmp cloth to void

lighting diculties. Ensure tht they re dry

before use.

INJECTOR

Ensure the injector remins free of ny foreign

mteril. If necessry, use  thin piece of wire to

cler the orice.

esatto.house

Troubleshooting

If you hve  problem with the cooktop, check the tble below. You my be ble to solve the problem

nd this will sve you from pying for  service cll. You will hve to py for  service cll even in the

wrrnty period if the problem is one listed below.

Tble 1

PROBLEM POSSIBLE CAUSE SOLUTION

Burner will not light

even though the

sprker is working

Knob not held down long enough in ‘9’

position for me sfegurd.

Repet lighting procedure nd

hold knob down for 5 seconds in

‘9’ position. (Refer pge 8).

Gs supply vlve turned o. Turn on gs supply to pplince.

Wrong knob turned.

Ensure the knob you re turning

corresponds to the burner you

wnt to light.

Port blockge in ignition re. Ensure tht ports in ignition re

re clen nd dry.

Ignition sprk plugs wet or dirty. Dry or clen ignition sprk plugs.

No sprk is obtined

when control knob is

ctivted

Electricity supply is disconnected or

switched o.

Switch on electricity

or check fuses.

Ignition sprk plugs wet or dirty. Dry or clen ignition sprk plugs.

Flmes uneven or

tending to lift

Flme ports blocked or wet. Clen or dry me ports.

Burner cp incorrectly tted. Ensure this component is

tted correctly.

Flmes not stying on

when knob

is relesed

Knob not held down long enough

in ‘9’ position for me sfegurd

to engge.

Repet lighting procedure nd

hold knob down for 5 seconds in

‘9’ position. (Refer pge 8).

Knob not set between ‘1’ nd ‘9’ Knob MUST be set between

these positions.

Dirt or spillge on me

sfegurd sensor. Clen me sfegurd sensor tip.

Low het, slow

cooking

Incorrect cooking pot or pn

being used. Refer to Figure 4 (pge 9).

Benchtop or knobs

overheting

Incorrect cooking pot or pn

being used. Refer to Figure 4 (pge 9).

Pot or pn not locted

on burner properly.

Ensure pot or pn is centrlly

locted on burner.

User Manual

Technicl Dt

Tble 2

FEATURES ECG604E

Burners 4

Wok No

Ignition 220–240V~

Trivet Enmel

Hob Mteril 201 Grde Stinless Steel

Fetures Continous Ignition Device

Flme Filure Sfety Yes

Gs Connection G1/2 thred

Gs Types NG (LP conversion

kit supplied)

COOKTOP PHYSICAL DIMENSIONS mm

Width 600

Depth 510

Height 95

CUT OUT DIMENSIONS mm

Width 560

Depth 490

ENERGY RATING NG  MJ/h

Auxiliry burner 4.3

Semi Rpid burner × 2 6.3

Rpid burner 10.8

Totl MJ/h 27.7

• This product is subject to continuous improvement,

specications are subject to change without prior notice.

• This product was tested in accordance with the following standards:

AS/NZS 60335.2.102: 2018 & AS/NZS 60335.1: 2020

esatto.house

Instlltion Instructions

INSTALLATION PROCEDURE

• Do not modify this pplince.

• WARNING: This pplince must be instlled

by n uthorised technicin or instller.

• Prior to instlltion, ensure tht the locl distribution conditions (nture of the gs nd

gs pressure) nd the djustment of the pplince re comptible.

• The djustment conditions for this pplince re stted on the lbel (or dt plte)

• This pplince is not connected to  combustion products evcution device. It

should be instlled nd connected in ccordnce with current instlltion regultions.

Prticulr ttention should be given to the relevnt requirements regrding ventiltion.

• Before instlling, turn o the gs nd electricity supply to the pplince.

• All pplinces contining ny electricl components must be erthed.

• Ensure tht the gs pipe nd electricl cble re instlled in such  wy tht they do not

touch ny prts of the pplince which my become hot.

• Gs pipe or connector shouldn’t be bent or blocked by ny other pplinces.

• Check the dimensions of the pplince s well s the dimensions of the gp to be cut in

the kitchen unit.

• The pnels locted bove the work surfce, directly next to the pplince, must be mde

of non-mmble mteril. Both the strtied surfcing nd the glue used to secure it

should be het resistnt, to prevent deteriortion.

• Turn on pplince tp nd light ech burner. Check for  cler blue me without yellow

tipping nd if burners show ny bnormlities check the following;

– Burner lid is on correctly

– Flme spreder is positioned correctly

– Burner verticlly ligned with injector end

• A full opertionl test nd test for possible lekges must be crried out by the instller

fter instlltion.

• The exible hose shll be tted in such  wy tht it cnnot come into contct with 

movble prt of the housing unit nd does not pss through ny spce susceptible of

becoming congested.

• Grese crnes produced t the fctory to meet the requirement of ll life hob.

CAUTION: Cooktops re supplied set up for nturl gs (NG). To use on LPG, the injectors

must be chnged using the conversion kit supplied. Refer LPG Conversion on pge 19.

Figure 5 – ECG604E

600

510

490

560

Gas Supply

Connection

200

User Manual

INSTALLATION PROCEDURE

• When tting the cooktop with  rngehood bove, refer to the instlltion requirements

of the rngehood for clernces required.

• This pplince is to be built into  kitchen unit or 600mm worktop, provided the

following minimum distnces re llowed;

• The edges of the cooktop must be  minimum distnce of 60mm from  side or rer wll.

• Adjcent wlls, cupbords nd protection for combustible mterils: Ensure tht the

pplince is instlled in ccordnce with AS/NZS 5601.1, or AS/NZS 5601.2 with regrd

to clernces to combustible surfces nd mterils, nd clernces to rngehoods nd

exhust fns.

• Clernces to combustible surfces my be reduced if combustible surfces re

protected in ccordnce with AS/NZS 5601.1, or AS/NZS 5601.2.

• 400mm between the cooktop surfces, providing tht the underside of the horizontl

surfce is in line with the outer edge of the cooktop. If the underside of the horizontl

surfce is lower thn 400mm, then it must be t lest 50mm wy from the outer edges

of the cooktop.

• 50mm clernce round the pplince nd between the cooktop surfce nd ny

combustible mterils.

• A brrier must be instlled to prevent ccidentl contct with the cooktop bse,

where the bse of the cooktop is ccessible from below (i.e. Inside  cupbord, etc.).

A minimum clernce of 25mm must be mintined between the bse nd the brrier.

This brrier my be mde of ny non-combustible, rigid mteril.

• You must hve  gp of t lest 25mm nd t most 74mm between the underneth of

the pplince nd ny surfce tht is below it.

• Brrier protection is not necessry if the product is instlled bove n underbench oven

or similr pplince nd/or if the cupbord construction is such tht the underside of

the cooktop is not ccessible.

• An oven must hve forced ventiltion to instll  cooktop bove it. Check the dimensions

of the oven in the instlltion mnul.

• The cut out size must obey the indiction.

• Ensure that there is an earthed power outlet within 900mm of the rear right hand side of

the cooktop when installed. This should be accessible at all times.

• A self-adhesive Foam Tape has been provided to act as a sealing agent and is to be

placed around the edge of the hob underside. Ensure that there are no gaps in the Foam

Tape. Take care to ensure that the seals meet without overlapping. The thickness of this

Foam Tape is 3mm and the width is 10mm.

Positioning

The edges of the hob must be a minimum distance of mm from a side or

rear wall.

700 mm between the highest point of the hob surface (including the burners)

and the underside of any horizontal surface directly above it.

400 mm between the hob surfaces, providing that the underside of the

horizontal surface is in line with the outer edge of the hob. If the underside of

the horizontal surface is lower than 400 mm, then it must be at least 50 mm

away from the outer edges of the hob.

50 mm clearance around the appliance and between the hob surface and any

combustible materials.

45 mm

You must have a gap of at least 25 mm and at most 74 mm between

the underneath of the appliance and any surface that is below it.

CLEARANCES REQUIRED

WHEN FITTING THE HOB

WITH A COOKER HOOD ABOVE

900mm

700mm

400mm

FO 0813

60mm

480mm

0mm

This appliance is to be built into a kitchen unit or 600mm worktop,providing

the following minium distances are allowed;

- An oven must have forced ventilation to install a hob above it.

- Check the dimensions of the oven in the installation manual.

- The cut out size must obey the indication.

830mm

INSTALLATION INSTRUCTIONS CONT.

INSTALLING THE APPLIANCE

•Remove the pan supports, the burner lid and

flame spreader and carefully turn the appliance

upside down and place it on a cushioned mat.

Take care that the Ignition devices and flame

supervision devices are not damaged in this

operation.

•Apply the sponge provided around the edge of

the appliance.

•Do not leave a gap in the sealing agent or

overlap the thickness.

WARNING!

DO NOT use a silicon sealant to seal the appliance

to the bench top.

This will make it difficult to remove the appliance

from the aperture in future, particularly if it needs to

be serviced.

1. Place the bracket (B) over the holes that match

the size of the screws. There are one set of screw

holes in each corner of the cooktop.

2. Slightly tighten a screw (C) through the bracket

(B) so that the bracket is attached to the hob, but

so that you can still adjust the position. Carefully

turn the hob back over and then gently lower it

into the aperture hole that you have cut out.

3. On the underneath of the hob, adjust the

brackets into a position that is suitable for

your worktop.

Then fully tighten the screws (C) to secure the hob

into position.

Installing the appliance

Bottom view

of the screws.There are one set of screw holes in each

corner of the hob (H) .

Slightly tighten a screw (C) through the bracket (B) so

that the bracket is attached to the hob, but so that you

can still adjust the position

.2 Carefully turn the hob back over and then gently lower

it into the aperture hole that you have cut out.

.3 On the underneath of the hob, adjust the brackets into

a position that is suitable for your worktop.

Then fully tighten the screws (C) to secure the hob into

position.

(A) SEALING STRIP

Remove the pan supports, the burner lid

and flame spreader and carefully turn the

appliance upside down and place it on a

cushioned mat.

Take care that the Ignition devices and

flame supervision devices are not damaged

in this operation.

2. Apply the sponge provided around the

edge of the appliance.

Do not leave a gap in the sealing agent or

overlap the thickness.

3ODFHWKHEUDFNHW %RYHUWKHKROHVWKDWPDWFKWKHVL]H

7KLVZLOOPDNHLWGLI¿FXOWWRUHPRYHWKH

DSSOLDQFHIURPWKHDSHUWXUHLQIXWXUH

SDUWLFXODUO\LILWQHHGVWREHVHUYLFHG

Do not use a silicon sealant to seal the

appliance against the aperture.

Installing the appliance

of the screws.There are one set of screw holes in each

corner of the hob (H) .

Slightly tighten a screw (C) through the bracket (B) so

that the bracket is attached to the hob, but so that you

can still adjust the position

.2 Carefully turn the hob back over and then gently lower

it into the aperture hole that you have cut out.

.3 On the underneath of the hob, adjust the brackets into

a position that is suitable for your worktop.

Then fully tighten the screws (C) to secure the hob into

position.

(A) SEALING STRIP

Remove the pan supports, the burner lid

and flame spreader and carefully turn the

appliance upside down and place it on a

cushioned mat.

Take care that the Ignition devices and

flame supervision devices are not damaged

in this operation.

2. Apply the sponge provided around the

edge of the appliance.

Do not leave a gap in the sealing agent or

overlap the thickness.

3ODFHWKHEUDFNHW %RYHUWKHKROHVWKDWPDWFKWKHVL]H

7KLVZLOOPDNHLWGLI¿FXOWWRUHPRYHWKH

DSSOLDQFHIURPWKHDSHUWXUHLQIXWXUH

SDUWLFXODUO\LILWQHHGVWREHVHUYLFHG

Do not use a silicon sealant to seal the

appliance against the aperture.

Instlltion Instructions (Continued)

esatto.house

Installing the appliance

Sponge

Bottom view

The thickness of the sponge is 3 mm.

The width of the sponge is 10 mm.

of the screws.There are one set of screw holes in each

corner of the hob (H) .

Slightly tighten a screw (C) through the bracket (B) so

that the bracket is attached to the hob, but so that you

can still adjust the position

.2 Carefully turn the hob back over and then gently lower

it into the aperture hole that you have cut out.

.3 On the underneath of the hob, adjust the brackets into

a position that is suitable for your worktop.

Then fully tighten the screws (C) to secure the hob into

position.

(A) SEALING STRIP

Remove the pan supports, the burner lid

and flame spreader and carefully turn the

appliance upside down and place it on a

cushioned mat.

Take care that the Ignition devices and

flame supervision devices are not damaged

in this operation.

2. Apply the sponge provided around the

edge of the appliance.

Do not leave a gap in the sealing agent or

overlap the thickness.

3ODFHWKHEUDFNHW %RYHUWKHKROHVWKDWPDWFKWKHVL]H

7KLVZLOOPDNHLWGLI¿FXOWWRUHPRYHWKH

DSSOLDQFHIURPWKHDSHUWXUHLQIXWXUH

SDUWLFXODUO\LILWQHHGVWREHVHUYLFHG

Do not use a silicon sealant to seal the

appliance against the aperture.

(A) SEALING STRIP

(B) CLAMP

WARNING: Do not use a silicon sealant to seal the appliance against the benchtop.

This will make it dicult to remove the appliance should the cooktop need a service.

• Fit the pull down clamps supplied to ensure that the cooktop cannot move after installation.

• Remove any excess seal visible after installation

WARNING: Failure to x the cooktop to the bench could result in loosening of the gas

connection through movement of the cooktop and a gas leak may result.

When benchtops re less thn 35mm in thickness, it my be necessry to t  spcer

between the benchtop nd ech clmp to ensure clmps cn be tightened suciently.

FITTING THE CLAMPS

• Ensure tht the hob is free from ll burner pieces nd trivets. Plce the hob upside down

on  soft surfce to protect both the hob nd your worksurfce from dmge.

• Plce the brcket (B) over the holes tht mtch the size of the screws. There re one

set of screw holes in ech corner of the hob. Slightly tighten  screw (C) through the

brcket (B) so tht the brcket is ttched to the hob whilst still llowing you to djust

it’s position.

• Crefully turn the hob bck over nd then gently lower it into the perture hole tht you

hve cut-out in your benchtop.

• On the underside of the hob, djust the brckets into  position tht is suitble for your

benchtop. Then fully tighten the screws (C) to secure the hob into position.

Figure 6

User Manual

Gs Connection

WARNING: This pplince must be instlled

nd connected in ccordnce with instlltion

regultions in force in the country in which the

pplince is to be used.

This pplince is supplied to run on LPG nd

nturl gs. Conversion for use on LPG nd

nturl gses must only be undertken by 

qulied person.

INSTALLATION OF APPLIANCE

Note: Wer protective gloves to t the hob.

CAUTION: lf it is necessry to djust or instll

the elbow, it is llowed only torque wrench with

9±1N.m, nd work on the Blck nut of mnifold

insted of on the elbow.

ADJUSTING THE DIRECTION OF ELBOW

After loosening the elbow, djust the elbow

interfce to the required direction s required,

nd keep the hexgonl hed of the elbow

motionless with  wrench. Use  9±1N.m torque

wrench to tighten the blck bolt of the gs inlet

pipe ssembly. Ensure tht the torque of the

wrench is within the required rnge to prevent

elbow brekge or dmge cused by excessive

force. After the instlltion is tightened, check

whether the prts re in good condition nd test

the ir tightness to ensure the tightness of the

instlltion. The instller is responsible for the

results of the process.

WARNING: Dnger of leks!

If ny connection is hndled, check the sel.

The mnufcturer is not lible for ny connection

leking, fter being hndled.

OPERATION ON N.G./S.N.G

This pplince is supplied for use with Nturl

Gs. However, it cn be converted for use with

LPG. Refer to LPG Conversion on pge 19.

SUPPLY PIPE SIZING

The totl hourly gs consumption for the

pplince is shown on the dt lbel. The

required supply pressure (i.e. t inlet to pplince

regultor) for ech gs type is shown on the dt

lbel, nd given in Tble 3 (pge 18). Use this

informtion in conjunction with the length of run,

number of elbows, tees nd bends, the vilble

service pressure nd the supply requirements of

other instlled pplinces to determine  suitble

pipe size.

For ssistnce in this mtter refer to the

pproprite section of AS/NZS 5601.1 or

AS/NZS 5601.2.

An AGA certied clss B or D exible connection

my be used to connect the cooktop in

ccordnce with AS/NZS 5601.1, in prticulr

section 5.9 nd cluse 6.10.1.8, or AS/NZS 5601.2,

in prticulr section 2.11.

Where  hose ssembly is used nd the cooktop

is in the instlled position, the hose ssembly shll

be suitble for connection to  xed consumer

piping outlet locted t  point 800 – 850mm

bove the oor nd in the region outside the width

of the pplince to  distnce of 250mm. The

point of connection to consumer piping must be

ccessible with pplince instlled.

ELBOW POSITIONING

It is possible to reposition the elbow if required

by loosening the locking nut nd elbow by using

two spnners. Re-tighten the entire ssembly

fter the elbow hs been repositioned. When

tting elbow to pplince, ensure tht the seling

wsher is tted.

Note to Instller: Assembly of elbow to mnifold

t rer of unit requires two spnners to secure

locking nut nd ensure lek free connection. For

this reson the elbow is best secured onto cooktop

mnifold before instlling unit into benchtop.

Installing the appliance

Remove the pan supports, the burner lid and flame spreader and carefully turn the appliance upside

down and place it on a cushioned mat.

Take care that the Ignition devices and flame supervision devices are not damaged in this operation.

Apply the sponge provided around the edge of the appliance.

Do not leave a gap in the sealing agent or overlap the thickness.

(A) SEALING STRIP

Do not use a silicon sealant to seal the

appliance against the aperture.

This will make it difficult to remove the

appliance from the aperture in future,

particularly if it needs to be serviced.

Place the bracket (B) over the holes that match the

size of the screws.There are one set of screw holes in

each corner of the hob (H).Slightly tighten a screw (C)

through the bracket (B) so that the bracket is attached

to the hob, but so that you can still adjust the position.

Carefully turn the hob back over and then gently lower

it into the aperture hole that you have cut out.

On the underneath of the hob, adjust the brackets into

a position that is suitable for your worktop.

Then fully tighten the screws (C) to secure the hob into

position.

Gas Connection

This appliance must be installed and connected in accordance with installation

regulations in force in the country in which the appliance is to be used.

This appliance is supplied to run on LPG and natural gas. Conversion for use on LPG

and natural gases must only be undertaken by a qualified person.

Installation of appliance

Note: Wear protective gloves to

fit the hob.

Caution!

Black nut of

manifold

Elbow

Torque:

9±1N.m

lf necessary to adjust or

install the elbow, it is allowed

only torque wrench with

9±1N.m, and work on the

Black nut of manifold instead

of on the elbow.

9.0N.m

esatto.house

Gas Connection

Statutory requirements

This installation must conform with the following:

■Manufacturer’s Installation instructions

■Local Gas Fitting Regulations

■Municipal Building Codes

■Refer to AS/NZS 5601.1 for Gas Installations

■S.A.A. Wiring Code

■Local Electrical Regulations

■Any other statutory regulations

Preparing to install

Refer to AS/NZS 5601.1 for piping size details. These built-in cooktops are intended to

be inserted in a benchtop cutout. Only an officially authorised technician should

connect the appliance. Before you begin, turn off the gas and electricity supply.

A full operational test and a test for possible leakages must be

carried out by the fitter after installation.

Access to the whole length of the connection hose must be possible

and the gas hose must be replaced before its use before the end of

service life (indicated on the hose.)

Before Leaving-Check all connections for gas leaks with soap and

water.

DO NOT use a naked flame for detecting leaks. Ignite all burners both

individually and concurrently to ensure correct operation of gas

valves, burners and ignition. Turn gas taps to low flame position and

observe stability of the flame for each burner individually and all

together. Adhere the duplicate data plate to an accessible location

near the hotplate. When satisfied with the hotplate, please instruct

the user on the correct method of operation. In case the appliance

fails to operate correctly after all checks have been carried out, refer

to the auth orised service provider in your area.

Natural gas connection

115

LPG gas connection

pressure test point

Figure 7

REGULATOR

An pplince regultor is provided. The regultor

must be positioned so tht the pressure test nipple

is ccessible when the pplince is instlled.

Connect the gs supply to the ½” B.S.P. internl

thred inlet of the regultor. Refer to ‘bench

cutout’ Figure 5 for connection point position.

Regultors re supplied pre-djusted nd

congured by the component mker for use with

Nturl Gs.

The pplince instller is not required to

mke n djustment to obtin the correct outlet

pressure setting.

An rrow on the bse of the regultor indictes

the direction of gs ow when the inlet nd outlet

of the regultor is orientted correctly.

When the regultor hs been tted, check for

leks from the connections with sopy wter

—never  nked me.

ASSEMBLY OF THE REGULATOR

The ssembly of the regultor to the cooktop

mnifold is chieved vi the elbow union nd

seling wsher supplied, refer to Figure 7.

The ½” prllel thred connects to the mnifold,

nd the seling wsher is plced between the

mnifold end nd the t fce on the elbow.

The ½” tpered thred connects to the outlet of

the regultor, nd is seled on the thred using

pproved thred seling tpe or pproved thred

seling compound.

The inlet of the regultor is  ½” prllel thred

nd is connected to consumer piping or hose

ssembly.

Regultors re supplied pre-djusted nd

congured by the component mker for use with

Nturl Gs.

The pplince instller is not required to mke n

djustment to obtin the correct outlet

pressure setting.

An rrow on the bse of the regultor indictes

the direction of gs ow when the inlet nd outlet

of the regultor is orientted correctly. When the

regultor hs been tted check for leks from the

connections with sopy wter.

Where a flexible hose assembly is used, ensure it is

approved to AS/NZS 1869, Class B. Any hose assembly

used must be restrained from accidental contact with

the flue outlet of an under bench oven.

This hose assembly shall be suitable for connection to a

fixed consumer piping outlet located as follows:

Hotplates at a point 800 mm to 850 mm above the floor

and in the region outside the width of the appliance to a

distance of 250 mm.

After connecting to gas, check for leaks using soapy

solution, never a naked flame. Inlet connection region for flexible hose

Gas Connection

Install in accordance with relevant gas standards and/or codes of

practice applicable.

Connect the elbow fitting to the appliance gas manifold

connection, and check that seals between the elbow and

manifold connection are in place and in good condition.

For Natural gas: connect the natural gas appliance

regulator (pictured opposite) with integral test point using

approved gas thread tape or compound to the elbow

fitting.

For Universal LPG: connect the brass test point adaptor

(pictured opposite) using approved gas thread tape or

compound to the elbow fitting.

Ensure the supply connection point, test point and natural gas

regulator adjustment screw (for Natural gas installation) are

accessible for testing and/or adjustment with the hotplate in

the installed position.

■

Flexible Hose: If installing with a hose assembly, it must comply with AS/NZS

accordance with AS/NZS 5601.1.

Ensure that the hose does not contact the hot surfaces of the

hotplate,oven,dishwasher or any other appliance that may be installed

underneath or next to the hotplate.The hose should not be subjected to abrasion,

kinking or permanent deformation and should be able to be inspected along its

entire length with the cooktop in the installed position. Unions compatible with

the hose fittings must be used and all connections tested for gas leaks.The

supply connection point shall be accessible with the appliance installed.

WARNING: Ensure that the hose assembly is restrained from accidental contact

with the flue outlet of an underbench oven.

Gas Connection

1869,10mmID,class B or D,no more than 1.2m long and installed in