Esatto ESL60DB slide-out rangehood is a sleek and stylish kitchen appliance designed to provide efficient ventilation and eliminate cooking odors, fumes, and grease. With its powerful motor and dual fans, it effectively captures and extracts cooking vapors, ensuring a cleaner and fresher kitchen environment. The rangehood features easy-to-operate push-button controls for adjusting fan speed and light settings, allowing you to customize the ventilation according to your cooking needs.
Esatto ESL60DB slide-out rangehood is a sleek and stylish kitchen appliance designed to provide efficient ventilation and eliminate cooking odors, fumes, and grease. With its powerful motor and dual fans, it effectively captures and extracts cooking vapors, ensuring a cleaner and fresher kitchen environment. The rangehood features easy-to-operate push-button controls for adjusting fan speed and light settings, allowing you to customize the ventilation according to your cooking needs.
Version
V1.0 0922
Everything you need
for your 60cm
Slide-out Rngehood
is in this User Mnul
Model/s
ESL60DB
ESL60DS
User Manual
2
Welcome
Congrtultions on purchsing your new Rngehood. The Estto brnd is
proudly distributed within Austrli by Residenti Group Pty Ltd.
Plese refer to the wrrnty crd t the rer of this mnul for informtion
regrding your product’s prts nd lbour wrrnty, or visit us online t:
www.residenti.group
At Residenti Group, we re customer obsessed nd our Support Tem re
there to ensure you get the most out of your pplince. Should you wnt to lern
more bout your new rngehood, it's fetures or importntly tking cre of the
pplince, our Support Tem re here to help.
You cn use our online Support Centre t nytime by visiting:
http://support.residentigroup.com.u
Or you cn contct us vi phone by diling: 1300 11 HELP (4357).
It is importnt tht you red through the following use nd cre mnul
thoroughly to fmilirise yourself with the instlltion nd opertion
requirements of your pplince to ensure optimum performnce.
Agin, thnk you for choosing n Estto pplince nd we look forwrd
to being of service to you.
Kind Regrds,
The Residenti Tem
Residenti roup
—
Head Office
165 Brkly Avenue
Burnley, Victori
Austrli 3121
—
ACN
600 546 656
—
Online
residenti.group
www.estto.house
@estto.house
—
Postage
PO Box 5177
Burnley, Victori
Austrli 3121
—
Telephone
1300 11 4357
www.esatto.house
esatto.house
3
Pge 2
Welcome
Pge 4
Sfety Instructions
Pge 8
Product Overview
Pge 10
Instlltion
Instructions
Pge 13
Opertion
Instructions
Pge 14
Mintennce
Clening
Pge 16
Troubleshooting
Pge 18
Your Receipt
Contents
Pge 19
Purchse Detils
Pge 20
Wrrnty
User Manual
4
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE
Red this mnul thoroughly before rst use,
even if you re fmilir with this type of product.
The sfety precutions enclosed herein reduce
the risk of re, electric shock nd injury when
correctly dhered to. Mke sure you understnd
ll instructions nd wrnings.
Keep the mnul in sfe plce for future
reference, long with the completed wrrnty
crd nd purchse receipt. If you sell or trnsfer
ownership of this product, pss on these
instructions to the new owner.
Alwys follow bsic sfety precutions nd
ccident prevention mesures when using n
electricl pplince. The following sttements you
will see in this booklet hve these menings:
WARNING: Indicting informtion concerning
your personl sfety.
CAUTION: Indicting informtion on how to
void dmging the pplince or cbinetry.
IMPORTANT: Indicting tips nd informtion
bout use of the pplince.
USAGE CONDITIONS AND RESTRICTIONS
• Domestic use only: This pplince is intended
for indoor household use only. It is not intended
for commercil, industril or outdoor use. It is not
intended for use in recretionl vehicle.
• Purpose: Do not use this pplince for nything
other thn its intended purpose. Other uses re
not recommended nd my cuse re, electric
shock or personl injury.
• Attchments: The use of ttchments is not
recommended by the pplince mnufcturer
nd distributor s they my be hzrdous.
• Improper use: Dmge due to improper use,
or repirs mde by unqulied personnel will
void your wrrnty. We ssume no libility
for ny eventul dmges cused by misuse
of the product or noncomplince with these
instructions.
BEFORE USING YOUR APPLIANCE
This mnul explins the proper use of your new
Estto rngehood. Plese red this mnul crefully
before using the product. This mnul should
be kept in sfe plce for hndy reference. This
rngehood is domestic pplince which hs been
mnufctured nd tested to comply with Austrlin
nd New Zelnd Stndrd AS/NZS 60335.2.31.
This rngehood must only be instlled in
ccordnce with the instructions provided. Incorrect
instlltion my cuse hrm to persons, dmge
property nd void the product’s wrrnty.
Red the following crefully to void dmge
or injury.
IMPORTANT: Check for ny dmge or mrks.
If you nd the pplince is dmged or mrked,
you must report it within 7 dys if you wish to clim
for dmge/ mrks under the mnufcturer’s
wrrnty. This does not ect your sttutory rights.
Sfety Instructions
esatto.house
5
WARNING: Follow these instructions crefully
to void injury, electric shock or re.
• Young children should be supervised to ensure
they do not ply with the rngehood.
• This pplince is not intended for use by persons
(including children) with reduced physicl,
sensory or mentl cpbilities, or lck of
experience nd knowledge, unless they hve
been given supervision or instruction concerning
the use of the pplince by person responsible
for their sfety.
• Ensure the rngehood is switched o before
crrying out mintennce, to void ny
possibility of electric shock.
• Do not mbé under the rngehood.
• This rngehood is not suitble for use
over brbecues.
• This rngehood cnnot be instlled for externl
use—only to be instlled indoors.
• The rngehood nd lters must be clened
regulrly to keep in good working order.
• The exhust from the rngehood must not be
dischrged into ny heting ue, which my
crry combustion products from other sources.
(Figure 1)
• Exhust ir must not be dischrged into
wll cvity, unless the cvity is designed
for the purpose.
• There shll be dequte ventiltion of the room
when the rngehood is used t the sme time
s pplinces burning gs or other fuels (not
pplicble tht only dischrge the ir bck into
the room).
• Regultions concerning the dischrge of ir hve
to be fullled.
• There must be dequte ventiltion of the room
when the rngehood is used t the sme time s
pplinces burning gs or other fuels.
• Your new rngehood is gurnteed ginst
electricl or mechnicl defects, subject to
certin exclusions tht re noted in the Wrrnty
Terms nd Conditions (t the rer of this user
mnul). The foregoing does not ect your
sttutory rights.
• Alwys cover lit gs burners with pots or pns
when rngehood is in use.
• Alwys switch o gs burners before you remove
pots or pns.
• Do not leve lit gs burners exposed due to the
risk of re. (Figure 2)
Figure 1
Figure 2
User Manual
6
Sfety Instructions (Continued)
ELECTRICAL CONNECTION
• Check tht the mins voltge mtches with the
voltge on the dt plte inside the rngehood.
• Check tht the instlltion complies with
stndrds of locl building, gs nd electricl
uthorities.
• Before connecting to the mins supply ensure
tht the mins voltge corresponds to the
voltge on the rting plte inside the rngehood.
• Only plug this unit into properly erthed outlet.
If in doubt seek dvise from suitbly qulied
person or service gent.
WARNING: If the supply cord is dmged, it must
be replced by the mnufcturer or its service
gent or similrly qulied person in order to void
hzrd.
WARNING: All electricl work must be done in
ccordnce with locl nd ntionl electricl codes
s pplicble nd should be undertken
by licenced nd qulied persons only. Filure to
follow these instructions cn result in deth, re or
electricl shock.
SAFETY WARNINGS: FOR THE INSTALLER
When instlling the rngehood, mke sure you
dhere to the minimum nd mximum distnces
from the rngehood bse to the cooktop surfce
(s per tble on pge 10).
Exhust ue instlltion:
The following rules must be strictly followed to
obtin optiml ir extrction.
• Keep exhust ue short nd stright.
• Do not reduce the size or restrict exhust ue.
• Keep bends in the exhust ue to minimum;
the more bends the lower the extrction
performnce.
• When using exible ue lwys instll
duct with helix pulled tut to minimise
pressure loss.
• Filure to observe these bsic instructions will
drsticlly reduce the performnce nd increse
the noise levels of the rngehood.
Exhust ir must not be dischrged into wll
cvity, unless the cvity is designed for tht
purpose. The exhust from the rngehood
must not be dischrged into ny heting ue, which
my crry combustion products from other sources.
NOTE: Some instlltions my require the
expndble/telescopic ducting to be cut to length.
Cut with shrp tin snips or ne-tooth hck
sw blde, tking cre not to distort or dent the
exhust cover. Where using expndble ducting,
it’s importnt to hve the ducting fully tught to
mximise eciency of the irow.
esatto.house
7
UNPACKING
During trnsporttion, protective pckging ws
used to protect the pplince ginst ny dmge.
After unpcking, plese dispose of ll elements of
pckging in wy tht will not cuse dmge to
the environment.
All mterils used for pckging the pplince re
environmentlly friendly; they re
100% recyclble nd re mrked with the
pproprite symbol.
CAUTION: During unpcking, the pckging
mterils (polythene bgs, polystyrene pieces, etc.)
should be kept out of rech of children.
DISPOSAL OF THE APPLIANCE
Old pplinces should not simply be disposed
of with norml household wste nd should be
delivered to collection nd recycling centre for
electric nd electronic equipment. A symbol shown
on the product, the instruction mnul or the
pckging shows tht it is suitble for recycling.
Mterils used inside the pplince re recyclble
nd re lbelled with informtion concerning this.
By recycling mterils or other prts from used
devices you re mking signicnt contribution to
the protection of our environment.
Informtion on pproprite disposl centres for
used devices cn be provided by your locl uthority.
TTRROOUUBBLLEESSHHOOOOTTIINNGG
Fault Cause Solution
Light on, but fan does
not work
The fan blade is jammed. Switch of the unit and
repair by qualified
service personnel only.
The motor is damaged.
Both light and fan do
not work
light bulb burn. Replace the bulb
with correct rating.
Power cord looses. Plug in to the power
supply again.
Serious Vibration
of the unit
The fan blade is damaged. Switch of the unit and
repair by qualified
service personnel only.
The fan motor is
not fixed tightly.
The unit is not hung
pro-perly on the
bracket.
Take down the unit and
check whether the bracket
is in proper location.
Suction per-formance
not good
Too long distance
between the unit and
the cooking plane
Readjust the
distance to 65-75cm
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it
should be taken to the appropriate collection point for the
recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailled information about
recycling of this product, please contact your local council or
your household waste disposal service.
Manufacturer
User Manual
8
Product Overview
Figure 3
Note: The images in this user manual are for reference only. Your appliance may appear dierently.
* Denotes ESL60DB dimension where dierent
YOUR RANGEHOOD
Model/s ESL60DB ESL60DS
Product Dimensions (W, D, H): 600mm, 304mm, 200mm 600mm, 300mm, 200mm
Cut-out Dimensions (A × B): 520mm × 270mm 520mm × 270mm
Fascia Depth: 24mm 20mm
Extraction: 450m3/hr 450m3/hr
Weight (Net): 8.01kg 7.25kg
Speed Settings: 2 2
Lighting: 1 × 0.5W LED 1 × 0.5W LED
Aluminium Filters 2 2
Power Supply: 220–240 Volts 50/60Hz 220–240 Volts 50/60Hz
600
42
470 / 474*
200
160
260
280
ø150
510
466
20/24*
esatto.house
9
RANGEHOOD COMPONENTS
Your Estto Slide-out Rngehood is supplied with:
• 1 × Rangehood
• 1 × Expandable 150mm pipe
• 1 × One-way valve (2pcs)
• 1 × Packet of screws and wall plugs
• 1 × Check valve
• 1 × User Manual
• 1 × Quick Start Guide
ADDITIONAL ITEMS REQUIRED FOR INSTALLATION
• Duct tape or cable ties
• Ducting relevant to your installation requirements
(including any rigid bends, vents and/or adapters)
• Drill and/or screwdriver
• Spirit Level
• Tape Measure
• Jigsaw
• Ladder
• Pencil
OPTIONAL ACCESSORIES
Residenti Group sell the following optionl ccessories, which cn
be purchsed seprtely by contcting our After Sles Support Tem.
• Activated Charcoal Filter
• Various ducting solutions (rigid ducting, adapters, vents/outlets and elbow bends)
User Manual
10
Instlltion Instructions
WARNING: Before starting the installation, please
refer to the Safety Information section.
• Always switch the power o prior to beginning
the installation.
• Stainless steel is very easily damaged during
installation.
• Wherever possible, protect the rangehood with
the cardboard box or plastic.
• A power point must be located within 1.5m of
the power cord exit from the rangehood, and it
should be always accessible to allow isolation
from power during cleaning or maintenance.
• A 150mm round ducting adapter is supplied,
however all other ducting accessories are not.
• All ducting must comply with building codes and
local requirements.
• If you are re-circulating the air, rather than
ducting, please ensure that the side outlet grilles
are not obstructed in any way as this will aect
the eciency of the rangehood.
• Ensure that the rangehood is mounted in a
level position, both horizontally and vertically.
This is essential to ensure the rangehood
operates correctly and prevents grease build
up at one end.
IMPORTANT: Never use a silicone around
your rangehood or ue pieces. Never install the
rangehood or ue pieces into the plaster ceiling
which prevents easy access to the rangehood for
servicing requirements.
IMPORTANT: Before installing your rangehood,
please record the details of your rangehood’s rating
label (located within the rangehood, behind the
aluminium grease lters) into the form on page 19.
This will be helpful should you need to contact our
service team in the future.
POSITIONING THE RANGEHOOD
NOTE: When the rangehood and appliance supplied
with energy other than electricity are simultaneously
in operation, the negative pressure in the room must
be not exceed 4 Pa (4 × 10-5 Bar).
IMPORTANT: The height of the rngehood
underside must be minimum of 600mm* to
mximum 800mm from the top of your cooktop
surfce (for gs cooktops this is the top of the
gs burner).
* If the instlltion instructions for your cooktop
specify greter distnce thn the minimum, then
tht shll be the minimum height for instlltion.
COOKTOP
FUEL TYPE:
DIMENSION A
Minimum* Maximum
Gas (multiple burners
with maximum 45.4 MJ/h
total output and no
single burner exceeding
16.2 MJ/h output)
600mm 800mm
Gas (multiple burners
with total output greater
than 45.4 MJ/h but less
than 77.8 MJ/h, and no
single burner exceeding
17.3 MJ/h output)
760mm 800mm
Gas (single burner not
exceeding 21.6 MJ/h
output)
650mm 800mm
Gas (single burner with
an output greater than
21.6 MJ/h but not
exceeding 29.2 MJ/h)
760mm 800mm
Electric 600mm 800mm
esatto.house
11
DUCTED INSTALLATION
This rangehood has been supplied with expandable
plastic ducting, however for maximum performance
we recommend installing with rigid or semi rigid
ducting. Use cable ties or suitable duct tape to
secure the exible pipe or ducting to the rangehood
duct outlet.
WARNING: All ducting must be re retardant.
Depending on your situation, there are multiple
options for ducting your rangehood, as follows:
• Straight up through your tiled or metal roof, using
a roof cowl (not supplied with the rangehood).
• Into your ceiling cavity (where compliant with
local and national building regulations/codes.
Seek approval from the relevant authority or
building inspector where necessary.
• Into your ceiling cavity and then vented to the
atmosphere through your eaves, using no more
than 2 × 90 degree bends within the ducting run.
• Through your wall.
IMPORTANT: Ducting can have a major eect on
your rangehoods performance. The following tips
outline how to correctly duct your rangehood.
• Always use the correct size ducting.
• This rangehood is designed for use with 150mm
ducting to achieve optimum airow performance
and minimised noise.
• For maximum performance use semi rigid
or rigid ducting.
• Always use non-ammable ducting
• Always duct to the outside atmosphere, unless
your local building codes and regulations permit
otherwise.
• Where using exible ducting, always install the
ducting pulled taut to minimize pressure loss,
and cut any excess ducting o.
• Where possible, avoid using 90 degree bends
and in their place use multiple 45 degree bends.
• Keep your total length of ducting to the shortest
length possible.
• Ensure there are no kinks in your ducting.
• Use cylindrical ducting whenever possible.
Installation steps
NOTE: Do not connect the power cable until the
installation is complete! Always perform installation
with two people to avoid injuries.
The typical installation method for your
undermount rangehood is into a purpose built
overhead/wall cabinet.
1. Remove the metal grease lters
2. Using a jigsaw, create the required cut-out
for your slide-out rangehood, as per the
measurement dimensions in the table on page 8.
Make sure the cut-out is at least 35mm from the
cabinet edge.
3. Drill the installation holes in the wall and then in
the wall as per diagrams below.
4. After you drill the holes, put the Expansion
rubber plugs (4 pcs) in to the holes.
5. After you put the expansion rubber plug into the
holes, then x the screws ST6.0*40mm(4pcs)
loosely.
User Manual
12
Instlltion Instructions (Continued)
5. Lift the rangehood onto the screws.
6. While one person is holding the rangehood,
the other person tightens the screws.
7. Finally, reinstall the grease lters.
VALVE INSTALLATION
Fix the one-wy-vlve to the ir outlet of the
rngehood. Then ttched the exhust pipe onto
the one-wy-vlve s shown below.
ELECTRICAL CONNECTION
Check that the installation complies with the
standards of local building, gas and electrical
authorities. Before connecting your rangehood to
the mains supply, ensure that the mains voltage
corresponds to the voltage on the rating plate inside
the rangehood.
Installtion way
1. Cut the hole(W x D) : 560 x 290mm
2.Draw the install hole in the cabinet.
3.Drill 4 holes in the cabinet, and then install the wall plugs&screws on it.
Remark: but the screws don’t make it tight.
4. Install the hood into the screws, and then make the screws tighten.
6
Installtion way
1. Cut the hole(W x D) : 560 x 290mm
2.Draw the install hole in the cabinet.
3.Drill 4 holes in the cabinet, and then install the wall plugs&screws on it.
Remark: but the screws don’t make it tight.
4. Install the hood into the screws, and then make the screws tighten.
6
esatto.house
13
Opertion Instructions
CAUTION:
• Do not touch the light for 30 minutes after using the appliance as it can be hot.
• Do not cover the globe with thermal insulation or other materials.
OPERATION
Your Slide-out Rangehood features switch button controls with two speed levels of extraction.
Motor Operation Switch
The Low Power Setting is recommended for ventilation in standard cooking operations.
When there is a high density of smoke or steam produced, it is recommended to select
the High Power Setting for the most eective ventilation.
[ ] = O
[ | ] = Low Power Setting
[ || ] = High Power Setting
Light Operation Switch
Select this button to turn the light on and o.
[ ] = O
[ – ] = On
Note: The images in this user manual are for reference only. Your appliance may appear dierently.
8
8
User Manual
14
PRIOR TO CLEANING YOUR RANGEHOOD
WARNING!
• Be sure to turn o the pplince nd remove the plug before ny mintennce is perform.
• Alwys let the pplince nd its components cool down before clening them.
• Do not use brsive wipes, chemicls or lcohol s these could dmge the surfce.
• Do not clen ny Electricl/Electronic prts .
• Do not use ny crid or corrosive detergents.
• Do not use ny brsive detergents or ny lkline dishwsher detergents!
• Mintennce nd inspection should be undertken on frequent bsis.
If there is ny visible dmge, strong odour or excessive overheting of components,
stop using the pplince.
• Clen the pplince in ccordnce with instructions. Filure to do so my result in risk of re.
RISK OF ELECTRIC SHOCK!
• Do not use stem clener.
CLEANING OF THE RANGEHOOD
TASK FREQUENCY
Clen the stinless surfce with soft cloth nd lukewrm
wter. A clening uid suitble for stinless steel my be used.
NOTE: To prevent ny criss-cross scrtches, ensure tht you
wipe long the grin of the stinless steel.
Weekly
Clening the grese lters Every 1 to 2 months)
(See Clening the grese lters for more
detils)
Mintennce Clening
esatto.house
15
CLEANING THE GREASE FILTERS
1. Remove the grese lters.
Cleaning option #1: Cleaning Manually (max 30°C)
• Sok the lters for bout 3 minutes in wter with mild non-corrosive grese-removing detergent.
• Wsh the lters seprtely from crockery nd kitchen utensils.
• Brush the lters gently with soft brush.
NOTE: Do not pply too much pressure to void dmging the lter
• Over time, fding nd discolourtion my hppen.
This is norml nd is not considered wrrnty issue.
2. Cleaning option #2: Cleaning using the dishwasher (max 30°C)
• Plce the lters in the dishwsher nd run progrm with mild non-corrosive grese-removing
detergent. NOTE: It is dvisble not to use rinse ids.
• Wsh the lters seprtely from crockery nd kitchen utensils.
• Brush the lters gently with soft brush.
NOTE: Do not pply too much pressure to void dmging the lter
• Over time, fding nd discolourtion my hppen.
This is norml nd is not considered wrrnty issue.
3. Leve the lters to dry nturlly out of direct sunlight.
4. Put the lters bck in its correct position.
User Manual
16
OPERATION IN CASE OF EMERGENCY
In the event of n emergency you should:
• Switch o ll rngehood controls.
• Switch the rngehood o t the power outlet nd immeditely unplug.
• Cll After Sles Support on 1300 11 4357 or emil support@residentigroup.com.u
Some minor fults cn be fixed by referring to the instructions given in the tble below.
IMPORTANT: If your pplince ppers to be operting incorrectly, then you should disconnect it
from your electricl supply nd then contct After Sles Support.
WARNING: Do not ttempt to repir the rngehood yourself.
Plese note tht if n engineer is sked to ttend whilst the product is under wrrnty nd finds tht the
problem is not the result of n pplince fult, then you my be lible for the cost of the cll out chrge.
The pplince must be ccessible for the engineer to perform ny necessry repir.
If your pplince is instlled in such wy tht n engineer is concerned tht dmge will be cused to the
pplince or your kitchen, then they will not complete repir. This includes situtions where the rngehood
hs been tiled in or seled in with selnt.
Plese refer to the conditions of tht pper on the wrrnty crd t the rer of this user mnul.
Troubleshooting
esatto.house
17
FAULT COMMON CAUSE COMMON SOLUTIONS
The lights cn be turned on,
however the motor does not
work
Fn switch is broken Cll After Sles Support for further
guidnce.
The motor is broken
Both the light nd motor do
not work
The fuse is broken Reset or replce the fuse.
The power supply cord is loose
or disconnected
Reconnect the power supply to the
wll socket.
Oil is leking The one-wy-vlve nd exhust
pipe re not tightly sel
Disssemble the one-wy-vlve nd
sel with selnt.
There is lekge between
section nd cover
Disssemble the section nd sel
with selnt.
The light is not working The light globes re dmged
or blown
The globes need replcing.
Refer to Replcing the light globe.
The is insucient suction
power or ir is not extrcted
dequtely.
The distnce between the
rngehood nd the cooktop is
too gret.
Hve your instller re-djust the
instlltion position, ensuring tht
the minimum distnces re observed
s per the building code nd relevnt
stndrds.
Ducting is loose, kinked, too
long or too mny bends.
Check tht your rngehood hs been
ducted correctly nd in ccordnce
with the instlltion instructions.
The rngehood is no longer in
horizontl position
The screws or not tight enough Tighten the screws nd level the
rngehood in horizontl position.
The rngehood is vibrting
ginst the wll or cupbord
The rngehood undermount is
not fixed correctly.
Tighten the internl sfety screws.
User Manual
18
Attch your receipt
to this pge
esatto.house
19
Purchse Detils
For your records, plese record detils of your purchse below nd stple
your receipt on the opposite pge. Your seril number cn be found on the rer of your Rngehood.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|
User Manual
20
WARRANTY TERMS AND CONDITIONS
RANGEHOODS
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) ‘acceptable quality’ as referred to in clause 10 of
this warranty has the same meaning referred to in
the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ‘ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656
in respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this
warranty has the same meaning referred to in the
ACL and includes a situation when an Appliance
cannot be repaired or it is uneconomic for Residentia
Group, at its discretion, to repair an Appliance during
the Warranty Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal,
domestic or household use (i.e. normal
single family use) as set out in the instruction
manual, the Appliance is warranted against
manufacturing defects for 24 months, following
the date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not
having purchased the Appliance for re-sale, and ‘your’
has a corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or
its ASR will, at no extra charge if your Appliance
is readily accessible for service, without special
equipment and subject to these terms and conditions,
repair or replace any parts which it considers to
be defective. Residentia Group or its ASR may use
remanufactured parts to repair your Appliance. You
agree that any replaced Appliances or parts become
the property of Residentia Group. This warranty does
not apply to light globes, batteries, lters, seals or
similar perishable parts.
4. Parts and Appliances not supplied by Residentia
Group are not covered by this warranty.
Wrrnty
— THIS WARRANTY IS VALID IN AUSTRALIA ONLY —
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Esatto ESL60DB slide-out rangehood is a sleek and stylish kitchen appliance designed to provide efficient ventilation and eliminate cooking odors, fumes, and grease. With its powerful motor and dual fans, it effectively captures and extracts cooking vapors, ensuring a cleaner and fresher kitchen environment. The rangehood features easy-to-operate push-button controls for adjusting fan speed and light settings, allowing you to customize the ventilation according to your cooking needs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI