Home Styles 5180-15 Assembly Instructions

Brand: Home Styles

Model: 5180-15

Type: Assembly Instructions

Hutch Unit Part List

88 5180 04

Arts & Crafts

Computer Hutch

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Hardware List

Hex Wrench

1 pc.

Head Cap Bolt

6 pcs. (+1 extra)

Cam Lock

12 pcs.(+1 extra)

Cam Lock Screw

12 pcs.(+1 extra)

Machine Screw

4 pcs.

Top

1 pc.

Adjustable Pin

12 pcs. (+2 extra)

Back Piece

1 pc.

Tools required for assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

[email protected]

Back Panel

2 pcs.

Side Panel

1 pc.

Middle Panel

1 pc.

Front Rail

1 pc.

Back Stretcher

1 pc.

Shelf

2 pcs.

Shelf

1 pc.

Door

1 pc.

Door

1 pc.

Side Panel

1 pc.

Middle Panel

1 pc.

Back Panel

2 pcs.

Back Piece

1 pc.

Back Piece

2 pcs.

Shelf

1 pc.

Steel Plate

Connector

2 pcs.

Door

Pull Handle

2 pcs.

Wood Screw

8 pcs. (+1 extra)

Small

Hex Wrench

1 pc.

Revised date : 24Mar2011

IMPORTANT

Do not tighten up all the screws until each part is properly assembled.

You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.

STEP 1

Assembly Instructions 2/3

Put Cam Lock Screws into the pre-drilled holes of Top (A) Side Panel (B),(C) Front Rail (I)

and tighten.

Attach Back Stretcher (H) to Side Panel (B) using Cam Lock.

Attach Back Piece (K) to Back Stretcher (H) and slide Back Panel (L) into place.

Attach Back Piece (I) to the unit and slide Back Panel (M) into place.

Attach Back Piece (K) to the unit and slide Back Panel (L) into Place.

Attach Back Stretcher (G) to the unit using Cam Locks.

STEP 2

Cam Lock

Cam Lock Screw

Cam Lock

Machine Screw

Pull Handle

Adjustable Pin

Head Cap Bolt

Assembly Instructions 3/3

STEP 3

Attach Shelf (J) to

the unit using Cam Locks.

Attach Middle Panel (D) and (E)

to shelf (J) with Head Cap Bolts.

Attach Front Rail (F) to the unit using Cam Lock.

Attach Side Panel (C) to the unit with Cam Locks.

Cam Lock

Head Cap Bolt

STEP 4

(Figure 2)

(Figure 1)

(Figure 4)

(Figure 3)

Place Top (A) onto the unit using Cam Locks

and Head Cap Bolts.

Turn the unit to

its upright position.

Insert Adjustable Pins into side panels and middle panels at the desired level

and Slide Shelf (N) and (O) into place.

Assemble Pull Handles to Door (P) and (Q)

with Machine Screws. (see Figure 1)

Attach Door (P) and (Q) to the side panels

by sliding the door lift hinges into

the side panel lift hinges. (see Figure 2)

Place the Hutch unit onto the Buffet unit. (see Figure 3)

Attach Steel Plate Connectors on the back of the units by inserting Wood Screws and tighten.

(see Figure 4)

HARDWARE LIST

Attention !

For safety reasons, please follow these additional instructions to

prevent the unit from tipping over.

Bracket

at the wall

Bracket

at the top

of the unit

Wood

Screw

Wall Screw

Plastic Belt

Top of unit

(figure X)

Wood Screw (short)

2 pcs.(+1 extra)

Wall Screw (long)

2 pcs.(+1 extra)

Anchor

2 pcs.(+1 extra)

Bracket

4 pcs.(+1 extra)

Plastic Belt

2 pcs.(+1 extra)

Assembly Instructions

Place the unit at desired

location in room.

Drill two ¼” holes in wall at the appropriate

location.

Insert the Anchors into the wall holes and

attach the Brackets using Wall Screws.

Attach the

Use the Plastic Belt to secure the

Brackets at the pre-drilled holes

on the top of the unit using Wood Screws.

Brackets on the unit to the Brackets on

the wall (See figure X).

Put the tie end of the belt into the loop end

of the belt and pull until tight.

Drill two ¼” holes in wall

Home Styles 5180-15 Assembly Instructions

Home Styles 5180-15 Assembly Instructions

Home Styles 5180-15 Assembly Instructions

Related papers

Other documents