Whalen 1023203 User manual

Brand
Whalen
Model
1023203
Type
User manual

This manual is also suitable for

Date 2015-12-03 Rev. 1 Factory: HSIVIE
E
Villa Florenza Exective Hutch
Model # VFEH
ASSEMBLY INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-877-494-2536 (English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(In US, Canada, and Mexico only)
Or visit our website www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
LOT NUMBER:
DATE PURCHASED: / /
2
E
1. This product is for indoor domestic use only.
2. Please read the Assembly Instructions prior to assembling this product.
3. To avoid damage, assemble the product on a non-abrasive surface such as a carpet surface.
4. Refer to your assembly manual for maximum weight capacities. Load drawers and shelves from the
bottom to the top. Place heavier items in lower drawers and/or shelves. Unload drawers and shelves from
the top to the bottom before moving the furniture.
5. Do not push furniture, especially on carpeted floor. Have someone help you lift the item and place it in its
new location. Remove any glass tops or shelves before moving.
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Villa Florenza Exective Hutch
(VFEH)
MADE IN VIETNAM
MAXIMUM RECOMMENDED WEIGHT LOADS
Please make sure you have all parts before beginning assembly. Do not fully tighten all bolts until you
finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly
easier. We recommend using two people for assembly.
GENERAL INFORMATION & TIPS
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM
WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.
MAXIMUM LOAD 22.7 kg / 50 lb
MAXIMUM LOAD 2.3 kg / 5 lb
3
E
Parts and Hardware List
PART # PART DESCRIPTION PART FIGURE QUANTITY
A Center Section
1
B Left Side Panel
1
C Right Side Panel
1
D Back Panel
1
E Back Stretcher
1
F
Adjustable Shelf
(Pre-attached)
2
4
E
Parts and Hardware List
PART # PART DESCRIPTION PART FIGURE QUANTITY
AA Bolt
8 + 1 extra
BB Lock Washer
8 + 1 extra
CC Flat Washer
8 + 1 extra
DD Cam Lock
2 + 1 extra
EE Cam Bolt
2 + 1 extra
FF Small Metal Bracket
4
GG Large Metal Bracket
2
HH Large Screw
16 + 1 extra
II
Small Screw
(8 pcs pre-attached)
3 + 1 extra
JJ
Shelf Support with Hole
(Pre-attached)
8
Allen Wrench
1
Touch-up Pen
1
Tipping Restraint
Hardware Kit
2 sets
Tools required: Allen wrench (included) and Phillips screwdriver (not included).
5
E
Assembly Instructions
1. Securely screw two Cam Bolts (EE) into the bottom corner holes on the Side Panels (B and C) as shown in
the illustration.
2. Position the Center Section (A) upside down on a level and protective surface. Open the doors and remove
the both drawers to attach the Side Panels (B and C). NOTE: To remove the drawers press down the plastic
clip on the bottom of drawers.
EE
A/B
B
C
A
6
E
Assembly Instructions
3. Attach the Left Side Panel (B) to the Center Section (A) using four Bolts (AA) with the Washers (BB and
CC) from inside through the countersunk holes on left side panel of the Center Section and screw into the
female connectors included on Left Side Panel.
4. Insert the Back Panel (D) into the grooves of the Center Section (A) and Left Side Panel (B).
5. Align the end hole of the Back Stretcher (E) with the insetalled Cam Lock Bolt on Left Side Panel (B) and
press them together. Make sure that the Back Panel (D) fits securely into the the Back Stretcher (E) groove.
6. Repeat the same procedure to attach the Right Side Panel (C) at the opposite end.
7. Fasten the Back Stretcher (E) to the Side Panels (B and C) by engaging two Cam Locks (DD).
D
E
A
B
C
E
B/C
EE
B/C
A
AA
BB
CC
D
E
A
B
DD
Backside
C
7
E
Assembly Instructions
8. Proceed to attach the Small Metal Brackets(FF) at each end of the Back Stretcher (E) and the bottom rail of
Center Section (A), using two Large Screws (HH) into the pilot holes to fasten the Back Stretcher (E) with
Side Panels (B and C).
9. Secure the Back Panel (D) in place with three Small Screws (II) into the pilot holes located at the backside
of the Back Stretcher (E).
10. If necessary, adjust the pre-installed Shelves (F) to your desired location.
11. Replace the drawers into their original place.
A
Backside
D
E
B
C
D
E
B/C
A
FF
HH
II
JJ
JJ
F
F
F
F
A
II
II
8
E
Assembly Instructions
12.
Now, ask for assistance to place the assembled Hutch on the top of the Base carefully, so that you will not
scratch the top surface. Make sure that it is centered properly and back edges of all side panels are even
with each other.
13.
At the backside of the Hutch and Base sections you will find a set of pilot holes, screw the Large Brackets
(GG) at both ends with the Large Screws (HH).
NOTE: In case the pilot holes are not located, pre-drill with a 1/16” drill bit on the Hutch and the Base,
using the Metal Bracket as template.
14.
Position the assembled unit at the desired location against a wall.
15.
Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach
the tip-over restraints to the unit and the wall.
NOTE:
The tipping restraint
hardware included is for
drywall construction. It will
be necessary to drill holes for
the the wall anchors.
Depending upon your wall
construction, different anchor
hardware maybe required.
Please contact your local
hardware store for assistance.
GG
HH
Backside
Hutch
Base
9
E
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or
shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
AUSTRALIA: Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure.
Customer Service: 1-877-494-2536
(English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(In US, Canada, and Mexico only)
www.whalenfurniture.com
MADE IN VIETNAM / FABRIQUÉ AU VIETNAM / HECHO EN VIETNAM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Whalen 1023203 User manual

Brand
Whalen
Model
1023203
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents